[alsa-devel] [RFC][PATCH] ASoC: simple-card: Merge single and muti DAI link code.

[Jean-Francois Moine]

On Fri, 29 Aug 2014 14:46:37 +0800
Xiubo Li <Li.Xiubo at freescale.com> wrote:

> This patch merge single DAI link and muti-DAI links code together,
> and simply the simple-card driver code.
> 
> And also do some other improvement:
> 
> Since from the DAI format micro SND_SOC_DAIFMT_CBx_CFx, the 'CBx'
> mean Codec's bit clock is as master/slave and the 'CFx' mean Codec's
> frame clock is as master/slave.
> 
> So these same DAI formats should be informed to CPU and CODE DAIs at
> the same time. For the Codec driver will set the bit clock and frame
> clock as the DAI formats said, but for the CPU driver, if the the
> bit clock or frame clock is as Codec master, so it should be set CPU
> DAI device as bit clock or frame clock as slave, and vice versa.
> 
> The old code will cause confusion, and we should be clear that the
> letter 'C' here mean to Codec.
> 
> Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
> Cc: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
> Cc: Jean-Francois Moine <moinejf at free.fr>
> Cc: Jyri Sarha <jsarha at ti.com>
> Cc: Nicolin Chen <nicoleotsuka at gmail.com>
> ---
> 
> Hi,
> 
> This patch will break the old DT, so i just send one RFC version, and
> will add the old DT patches in next version if this patch can work
> well.
> 
> Any comments and advices are welcome.

Hi Xiubo,

My DT is

	sound {
		compatible = "simple-audio-card";
		simple-audio-card,name = "Cubox Audio";

		simple-audio-card,dai-link at 0 {		/* I2S - HDMI */
			format = "i2s";
			cpu {
				sound-dai = <&audio1 0>;
			};
			codec {
				sound-dai = <&hdmi 0>;
			};
		};
	...

I was getting 0x1001 as the format (codec clk & FRM master and i2s').

With your patch, I get 0x4000 (clk master & frame slave and no format).

-- 
Ken ar c'hentañ	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/