[alsa-devel] [PATCH v3 1/2] mfd: arizona: Add support for INn_Modec register control

[Lee Jones]

On Mon, 18 Aug 2014, Inha Song wrote:

> Some boards need to set the INn_MODE[1:0] register to change
> the input signal patch. This wlf,inmode property is optional.
> If present, values must be specified less than or equal to
> the number of input singals. If values less than the number
> of input signals, elements that has not been specifed are set
> to 0 by default.
> 
> Example:
>    - wlf,inmode = <2 0 2>;	/* IN1, IN3 use DMIC */
> 
> Signed-off-by: Inha Song <ideal.song at samsung.com>
> ---
>  drivers/mfd/arizona-core.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 10a0cb9..81e6db8 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -534,7 +534,7 @@ EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
>  static int arizona_of_get_core_pdata(struct arizona *arizona)
>  {
>  	struct arizona_pdata *pdata = &arizona->pdata;
> -	int ret, i;
> +	int ret, i, proplen;
>  
>  	pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);
>  
> @@ -560,6 +560,12 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
>  			ret);
>  	}
>  
> +	proplen = of_property_count_u32_elems(arizona->dev->of_node,
> +					      "wlf,inmode");
> +	if (proplen > 0 && proplen <= ARRAY_SIZE(arizona->pdata.inmode))
> +		of_property_read_u32_array(arizona->dev->of_node, "wlf,inmode",
> +					   arizona->pdata.inmode, proplen);

of_property_for_each_u32()?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog