[alsa-devel] [PATCH v2 2/2] mfd: arizona: Update DT binding to support INn_MODE init_data

[Charles Keepax]

On Wed, Aug 13, 2014 at 08:54:56PM +0900, Inha Song wrote:
> This patch update DT binding to support INn_MODE init_data. Each
> input signal path can be configurated either as a Analogue or
> Digital using the INn_MODE registers.
> 
> Signed-off-by: Inha Song <ideal.song at samsung.com>
> ---
>  Documentation/devicetree/bindings/mfd/arizona.txt | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
> index 5c7e723..b8c131e 100644
> --- a/Documentation/devicetree/bindings/mfd/arizona.txt
> +++ b/Documentation/devicetree/bindings/mfd/arizona.txt
> @@ -42,6 +42,14 @@ Optional properties:
>      the chip default will be used.  If present exactly five values must
>      be specified.
>  
> +  - wlf,inmode : A list of INn_MODE register values, where n is the number
> +    of input signal. Each input signal path can be configurated either as a
> +    Analogue or Digital using the INn_MODE registers. If absent, INn_MODE
> +    registers set to 0 by default. If present, values must be specified less
> +    than or equal to the number of input singal. If values less than the

Typo here should be "input signals".

> +    number of input signal, elements that has not been specifed are set to 0
> +    by default.
> +
>    - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
>      they are being externally supplied. As covered in
>      Documentation/devicetree/bindings/regulator/regulator.txt
> -- 
> 2.0.0.390.gcb682f8
> 

Thanks,
Charles