[alsa-devel] [PATCH] ASoC: wm8962: Correct the bit offset to enable mono speaker output

[Mark Brown]

On Tue, Aug 12, 2014 at 09:24:16AM +0100, Charles Keepax wrote:
> On Mon, Aug 11, 2014 at 02:19:49PM +0100, Charles Keepax wrote:

> > From the wording of "tie both outputs together" in the datasheet
> > I would assume that means both should be fed the same audio? Was
> > this done? I will try to give the hardware guys here a shout and
> > see if I can get some clarification on mono mode on this device.

> I have had a word with the hardware team here and both channels
> do need to be enabled but audio should only be fed to the left
> channel. So the driver definitely needs updated for the mono
> case, but I am unclear as to what is causing your poor audio
> quality issue.

Overdriving the speaker perhaps?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20140812/50083ab4/attachment-0001.sig>