[alsa-devel] [PATCHv2] ASOC add wm8973 support to wm8971
Charles Keepax
ckeepax at opensource.wolfsonmicro.com
Tue Aug 12 11:24:38 CEST 2014
On Fri, Aug 01, 2014 at 02:10:31PM +0800, Xavier Hsu wrote:
> This patch adds support for the wm8973 codec.
> After the initial comments, we merged wm8973 driver
> into wm8971 driver.
>
> Any comments about improving the patch are welcome.
> Thanks.
>
> Signed-off-by: Xavier Hsu <xavier.hsu at linaro.org>
> Signed-off-by: Andy Green <andy.green at linaro.org>
> ---
I think it would help review to split this patch up, there are
quite a few fixes, formatting changes, improvements to the
existing driver and support for 8973 all mixed together in here.
> Documentation/devicetree/bindings/sound/wm8971.txt | 26 +
> sound/soc/codecs/wm8971.c | 777 +++++++++++++++++---
> sound/soc/codecs/wm8971.h | 21 +-
> 3 files changed, 696 insertions(+), 128 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/wm8971.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/wm8971.txt b/Documentation/devicetree/bindings/sound/wm8971.txt
> new file mode 100644
> index 0000000..7313dd1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/wm8971.txt
> @@ -0,0 +1,26 @@
> +WM8971 and WM8973 audio CODEC
> +
> +These devices support both I2C and SPI (configured with pin strapping
> +on the board).
> +
> +Required properties:
> +
> + - compatible : "wlf,wm8971".
> + "wlf,wm8973".
> +
> + - reg : the I2C address of the device for I2C, the chip select
> + number for SPI.
> +
> +Optional properties:
> +
> + - mclk-div : Setting the CLKDIV2 bit for dividing MCLK.
> + mclk-div = <0> (Default & not divide).
> + mclk-div = <1> (Divide by 2).
> +
> +Example:
> +
> +codec: wm8973 at 1a {
> + compatible = "wlf,wm8973";
> + reg = <0x1a>;
> + mclk-div = <1>;
> +};
> diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
> index 09b7b42..6b1838c 100644
> --- a/sound/soc/codecs/wm8971.c
> +++ b/sound/soc/codecs/wm8971.c
> @@ -7,6 +7,10 @@
> *
> * Based on wm8753.c by Liam Girdwood
> *
> + * WM8973 support Copyright (C) 2014 Linaro, Ltd
> + * Author: Xavier Hsu <xavier.hsu at linaro.org>
> + * Andy Green <andy.green at linaro.org>
> + *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License as published by the
> * Free Software Foundation; either version 2 of the License, or (at your
> @@ -26,16 +30,31 @@
> #include <sound/pcm_params.h>
> #include <sound/soc.h>
> #include <sound/initval.h>
> +#include <sound/tlv.h>
>
> #include "wm8971.h"
>
> -#define WM8971_REG_COUNT 43
> +enum variant {
> + VARIANT_WM8971,
> + VARIANT_WM8973
> +};
>
> -static struct workqueue_struct *wm8971_workq = NULL;
> +#define WM8971_REG_COUNT 43
>
> /* codec private data */
> struct wm8971_priv {
> + struct regmap *regmap;
> + enum variant variant;
> unsigned int sysclk;
> + struct snd_pcm_hw_constraint_list *sysclk_constraints;
> + int playback_fs;
> + bool deemph;
> + int mclk_div;
> +};
> +
> +static const u16 charge[][2] = {
> + [VARIANT_WM8971] = { 0xfe3e, 0x01c0 },
> + [VARIANT_WM8973] = { 0x003e, 0x01f0 },
> };
>
> /*
> @@ -91,26 +110,53 @@ static const struct reg_default wm8971_reg_defaults[] = {
>
> #define wm8971_reset(c) snd_soc_write(c, WM8971_RESET, 0)
>
> -/* WM8971 Controls */
> -static const char *wm8971_bass[] = { "Linear Control", "Adaptive Boost" };
> -static const char *wm8971_bass_filter[] = { "130Hz @ 48kHz",
> - "200Hz @ 48kHz" };
> -static const char *wm8971_treble[] = { "8kHz", "4kHz" };
> -static const char *wm8971_alc_func[] = { "Off", "Right", "Left", "Stereo" };
> -static const char *wm8971_ng_type[] = { "Constant PGA Gain",
> - "Mute ADC Output" };
> -static const char *wm8971_deemp[] = { "None", "32kHz", "44.1kHz", "48kHz" };
> -static const char *wm8971_mono_mux[] = {"Stereo", "Mono (Left)",
> - "Mono (Right)", "Digital Mono"};
> -static const char *wm8971_dac_phase[] = { "Non Inverted", "Inverted" };
> -static const char *wm8971_lline_mux[] = {"Line", "NC", "NC", "PGA",
> - "Differential"};
> -static const char *wm8971_rline_mux[] = {"Line", "Mic", "NC", "PGA",
> - "Differential"};
> -static const char *wm8971_lpga_sel[] = {"Line", "NC", "NC", "Differential"};
> -static const char *wm8971_rpga_sel[] = {"Line", "Mic", "NC", "Differential"};
> -static const char *wm8971_adcpol[] = {"Normal", "L Invert", "R Invert",
> - "L + R Invert"};
> +/* WM8971 / 3 Controls */
> +static const char *wm8971_bass[]
> += { "Linear Control", "Adaptive Boost" };
> +static const char *wm8971_bass_filter[]
> += { "130Hz @ 48kHz", "200Hz @ 48kHz" };
> +static const char *wm8971_treble[]
> += { "8kHz", "4kHz" };
> +static const char *wm8971_alc_func[]
> += { "Off", "Right", "Left", "Stereo" };
> +static const char *wm8971_ng_type[]
> += { "Constant PGA Gain", "Mute ADC Output" };
> +static const char *wm8971_deemp[]
> += { "None", "32kHz", "44.1kHz", "48kHz" };
> +static const char *wm8971_mono_mux[]
> += {"Stereo", "Mono (Left)", "Mono (Right)", "Digital Mono"};
> +
> +/* WM8971-only */
> +static const char *wm8971_dac_phase[]
> += { "Non Inverted", "Inverted" };
> +static const char *wm8971_lline_mux[]
> += {"Line", "NC", "NC", "PGA", "Differential"};
> +static const char *wm8971_rline_mux[]
> += {"Line", "Mic", "NC", "PGA", "Differential"};
> +static const char *wm8971_lpga_sel[]
> += {"Line", "NC", "NC", "Differential"};
> +static const char *wm8971_rpga_sel[]
> += {"Line", "Mic", "NC", "Differential"};
> +static const char *wm8971_adcpol[]
> += {"Normal", "L Invert", "R Invert", "L + R Invert"};
> +
> +/* WM8973-only */
> +static const char const *wm8973_line_mux[] = {"Line 1", "Line 2", "Line 3",
> + "PGA", "Differential"};
> +static const char const *wm8973_pga_sel[] = {"Line 1", "Line 2", "Line 3",
> + "Differential"};
> +static const char const *wm8973_out3[] = {"VREF", "ROUT1 + Vol", "MonoOut",
> + "ROUT1"};
> +static const char const *wm8973_diff_sel[] = {"Line 1", "Line 2"};
> +static const char const *wm8973_adcpol[] = {"Normal", "L Invert", "R Invert",
> + "L + R Invert"};
> +static const char const *wm8973_3d_lc[] = { "200Hz", "500Hz" };
> +static const char const *wm8973_3d_uc[] = { "2.2kHz", "1.5kHz" };
> +static const char const *wm8973_3d_func[] = {"Capture", "Playback"};
> +
> +static const int wm8973_deemph_rates[] = { 0, 32000, 44100, 48000 };
> +
> +
>
> static const struct soc_enum wm8971_enum[] = {
> SOC_ENUM_SINGLE(WM8971_BASS, 7, 2, wm8971_bass), /* 0 */
> @@ -136,24 +182,24 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
> SOC_DOUBLE_R("Capture Switch", WM8971_LINVOL, WM8971_RINVOL, 7, 1, 1),
>
> SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8971_LOUT1V,
> - WM8971_ROUT1V, 7, 1, 0),
> + WM8971_ROUT1V, 7, 1, 0),
> SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8971_LOUT2V,
> - WM8971_ROUT2V, 7, 1, 0),
> + WM8971_ROUT2V, 7, 1, 0),
> SOC_SINGLE("Mono Playback ZC Switch", WM8971_MOUTV, 7, 1, 0),
>
> SOC_DOUBLE_R("PCM Volume", WM8971_LDAC, WM8971_RDAC, 0, 255, 0),
>
> SOC_DOUBLE_R("Bypass Left Playback Volume", WM8971_LOUTM1,
> - WM8971_LOUTM2, 4, 7, 1),
> + WM8971_LOUTM2, 4, 7, 1),
> SOC_DOUBLE_R("Bypass Right Playback Volume", WM8971_ROUTM1,
> - WM8971_ROUTM2, 4, 7, 1),
> + WM8971_ROUTM2, 4, 7, 1),
> SOC_DOUBLE_R("Bypass Mono Playback Volume", WM8971_MOUTM1,
> - WM8971_MOUTM2, 4, 7, 1),
> + WM8971_MOUTM2, 4, 7, 1),
>
> SOC_DOUBLE_R("Headphone Playback Volume", WM8971_LOUT1V,
> - WM8971_ROUT1V, 0, 127, 0),
> + WM8971_ROUT1V, 0, 127, 0),
> SOC_DOUBLE_R("Speaker Playback Volume", WM8971_LOUT2V,
> - WM8971_ROUT2V, 0, 127, 0),
> + WM8971_ROUT2V, 0, 127, 0),
I would be inclined to drop these formatting changes or put them in a
seperate patch. It some what clutters up the review.
>
> SOC_ENUM("Bass Boost", wm8971_enum[0]),
> SOC_ENUM("Bass Filter", wm8971_enum[1]),
> @@ -188,6 +234,224 @@ static const struct snd_kcontrol_new wm8971_snd_controls[] = {
> SOC_DOUBLE_R("Mic Boost", WM8971_LADCIN, WM8971_RADCIN, 4, 3, 0),
> };
>
> +static int wm8973_set_deemph(struct snd_soc_codec *codec)
> +{
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> + int val = 0, i, best = 0;
> +
> + /* If we're using deemphasis select the nearest available sample
> + * rate.
> + */
> + if (wm8971->deemph) {
> + best = 1;
> + for (i = 2; i < ARRAY_SIZE(wm8973_deemph_rates); i++) {
> + if (abs(wm8973_deemph_rates[i] - wm8971->playback_fs) <
> + abs(wm8973_deemph_rates[best] -
> + wm8971->playback_fs))
> + best = i;
> + }
> + val = best << 1;
> + }
> +
> + dev_dbg(codec->dev, "Set deemphasis %d (%dHz)\n",
> + best, wm8973_deemph_rates[best]);
> +
> + return snd_soc_update_bits(codec, WM8971_ADCDAC, 0x6, val);
> +}
> +
> +static int wm8973_get_deemph(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> +
> + ucontrol->value.enumerated.item[0] = wm8971->deemph;
> +
> + return 0;
> +}
> +
> +static int wm8973_put_deemph(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> + int deemph = ucontrol->value.enumerated.item[0];
> + int ret = 0;
> +
> + if (deemph > 1)
> + return -EINVAL;
> +
> + mutex_lock(&codec->mutex);
> + if (wm8971->deemph != deemph) {
> + wm8971->deemph = deemph;
> + wm8973_set_deemph(codec);
> +
> + ret = 1;
> + }
> + mutex_unlock(&codec->mutex);
> +
> + return ret;
> +}
> +
> +static const DECLARE_TLV_DB_SCALE(in_vol, -1725, 75, 0);
> +static const DECLARE_TLV_DB_SCALE(out_vol, -6700, 91, 0);
> +static const DECLARE_TLV_DB_SCALE(attenuate_6db, -600, 600, 0);
> +static const DECLARE_TLV_DB_SCALE(dac_vol, -12700, 50, 0);
> +static const DECLARE_TLV_DB_SCALE(tone_vol, -600, 150, 0);
> +static const DECLARE_TLV_DB_SCALE(alc_tar_vol, -2850, 150, 0);
> +static const DECLARE_TLV_DB_SCALE(alc_max_vol, -1200, 600, 0);
> +static const DECLARE_TLV_DB_SCALE(adc_vol, -9700, 50, 0);
> +static const DECLARE_TLV_DB_SCALE(bypass_out_vol, -1500, 300, 0);
> +
> +static const SOC_ENUM_SINGLE_DECL(bass_boost, WM8971_BASS, 7, wm8971_bass);
> +static const SOC_ENUM_SINGLE_DECL(bass_filter, WM8971_BASS,
> + 6, wm8971_bass_filter);
> +static const SOC_ENUM_SINGLE_DECL(treble_cutoff, WM8971_TREBLE,
> + 6, wm8971_treble);
> +static const SOC_ENUM_SINGLE_DECL(lower_cutoff, WM8973_3D, 5, wm8973_3d_lc);
> +static const SOC_ENUM_SINGLE_DECL(upper_cutoff, WM8973_3D, 6, wm8973_3d_uc);
> +static const SOC_ENUM_SINGLE_DECL(mode, WM8973_3D, 7, wm8973_3d_func);
> +static const SOC_ENUM_SINGLE_DECL(alc_capture_func, WM8971_ALC1,
> + 7, wm8971_alc_func);
> +static const SOC_ENUM_SINGLE_DECL(alc_capture_ngtype, WM8971_NGATE,
> + 1, wm8971_ng_type);
> +static const SOC_ENUM_SINGLE_DECL(left_line, WM8971_LOUTM1,
> + 0, wm8973_line_mux);
> +static const SOC_ENUM_SINGLE_DECL(right_line, WM8971_ROUTM1,
> + 0, wm8973_line_mux);
> +static const SOC_ENUM_SINGLE_DECL(left_pga, WM8971_LADCIN, 6, wm8973_pga_sel);
> +static const SOC_ENUM_SINGLE_DECL(right_pga, WM8971_RADCIN, 6, wm8973_pga_sel);
> +static const SOC_ENUM_SINGLE_DECL(out3, WM8971_ADCTL2, 7, wm8973_out3);
> +static const SOC_ENUM_SINGLE_DECL(diffmux, WM8971_ADCIN, 8, wm8973_diff_sel);
> +static const SOC_ENUM_SINGLE_DECL(capture_polarity, WM8971_ADCDAC,
> + 5, wm8973_adcpol);
> +static const SOC_ENUM_SINGLE_DECL(monomux, WM8971_ADCIN, 6, wm8971_mono_mux);
> +
> +
> +static const struct snd_kcontrol_new wm8973_snd_controls[] = {
> + /* Left & Right Input volume */
> + SOC_DOUBLE_R_TLV("Capture Volume", WM8971_LINVOL, WM8971_RINVOL,
> + 0, 63, 0, in_vol),
> + SOC_DOUBLE_R("Capture ZC Switch", WM8971_LINVOL, WM8971_RINVOL,
> + 6, 1, 0),
> + SOC_DOUBLE_R("Capture Switch", WM8971_LINVOL, WM8971_RINVOL, 7, 1, 1),
> +
> + /* LOUT1 & ROUT1 volume */
> + SOC_DOUBLE_R_TLV("Headphone Playback Volume", WM8971_LOUT1V,
> + WM8971_ROUT1V, 0, 127, 0, out_vol),
> + SOC_DOUBLE_R("Headphone Playback ZC Switch", WM8971_LOUT1V,
> + WM8971_ROUT1V, 7, 1, 0),
> +
> + /* ADC & DAC control */
> + SOC_SINGLE("Capture Filter Switch", WM8971_ADCDAC, 0, 1, 1),
> + SOC_SINGLE_BOOL_EXT("Playback De-emphasis Switch", 0,
> + wm8973_get_deemph, wm8973_put_deemph),
> + SOC_ENUM("Capture Polarity", capture_polarity),
> + SOC_SINGLE_TLV("Playback 6dB Attenuate", WM8971_ADCDAC,
> + 7, 1, 0, attenuate_6db),
> + SOC_SINGLE_TLV("Capture 6dB Attenuate", WM8971_ADCDAC,
> + 8, 1, 0, attenuate_6db),
> + /* ADCDAC Bit 4 - HPOR */
> +
> + /* Left & Right Channel Digital Volume */
> + SOC_DOUBLE_R_TLV("DAC Volume", WM8971_LDAC, WM8971_RDAC,
> + 0, 255, 0, dac_vol),
> +
> + /* Bass Control */
> + SOC_SINGLE_TLV("Bass Volume", WM8971_BASS, 0, 15, 1, tone_vol),
> + SOC_ENUM("Bass Boost", bass_boost),
> + SOC_ENUM("Bass Filter", bass_filter),
> +
> + /* Treble Control */
> + SOC_SINGLE_TLV("Treble Volume", WM8971_TREBLE, 0, 15, 0, tone_vol),
> + SOC_ENUM("Treble Cut-off", treble_cutoff),
> +
> + /* 3D Control */
> + SOC_SINGLE("3D Switch", WM8973_3D, 0, 1, 0),
> + SOC_SINGLE("3D Volume", WM8973_3D, 1, 15, 0),
> + SOC_ENUM("3D Lower Cut-off", lower_cutoff),
> + SOC_ENUM("3D Upper Cut-off", upper_cutoff),
> + SOC_ENUM("3D Mode", mode),
> +
> + /* ALC1 & ALC2 & ALC3 Control */
> + SOC_SINGLE_TLV("ALC Capture Target Volume", WM8971_ALC1,
> + 0, 15, 0, alc_tar_vol),
> + SOC_SINGLE_TLV("ALC Capture Max Volume", WM8971_ALC1,
> + 4, 7, 0, alc_max_vol),
> + SOC_ENUM("ALC Capture Function", alc_capture_func),
> +
> + SOC_SINGLE("ALC Capture Hold Time", WM8971_ALC2, 0, 15, 0),
> + SOC_SINGLE("ALC Capture ZC Switch", WM8971_ALC2, 7, 1, 0),
> +
> + SOC_SINGLE("ALC Capture Attack Time", WM8971_ALC3, 0, 15, 0),
> + SOC_SINGLE("ALC Capture Decay Time", WM8971_ALC3, 4, 15, 0),
> +
> + /* Noise Gate Control */
> + SOC_SINGLE("ALC Capture NG Switch", WM8971_NGATE, 0, 1, 0),
> + SOC_ENUM("ALC Capture NG Type", alc_capture_ngtype),
> + SOC_SINGLE("ALC Capture NG Threshold", WM8971_NGATE, 3, 31, 0),
> +
> + /* Left & Right ADC Digital Volume*/
> + SOC_DOUBLE_R_TLV("ADC Volume", WM8971_LADC, WM8971_RADC,
> + 0, 255, 0, adc_vol),
> +
> + /* Additional Control 1 */
> + SOC_SINGLE("ZC Timeout Switch", WM8971_ADCTL1, 0, 1, 0),
> + SOC_SINGLE("Playback Invert Switch", WM8971_ADCTL1, 1, 1, 0),
> + SOC_SINGLE("Analogue Bias", WM8971_ADCTL1, 6, 3, 0),
> + /* ADCTL1 Bit 2,3 - DATSEL */
> + /* ADCTL1 Bit 6,7 - VSEL */
> +
> + /* Additional Control 2 */
> + SOC_SINGLE("Right Speaker Playback Invert Switch", WM8971_ADCTL2,
> + 4, 1, 0),
> + /* ADCTL2 Bit 2 - LRCM */
> + SOC_SINGLE("LRCLK Switch", WM8971_ADCTL2, 2, 1, 0),
> + /* ADCTL2 Bit 3 - TRI */
> + SOC_SINGLE("Headphone Switch POL", WM8971_ADCTL2, 5, 1, 0),
> + SOC_SINGLE("Headphone Switch EN", WM8971_ADCTL2, 6, 1, 0),
> +
> + /* Additional Control 3 */
> + /* ADCTL3 Bit 5 - HPFLREN */
> + /* ADCTL3 Bit 6 - VROI */
> + /* ADCTL3 Bit 7,8 - ADCLRM */
> +
> + /* ADC input Mode */
> + /* ADCIN Bit 4 - LDCM */
> + /* ADCIN Bit 5 - RDCM */
> + /* ADCIN Bit 6,7 - MONOMIX */
> +
> + /* Left & Right ADC Signal Path Control*/
> + SOC_DOUBLE_R("Mic Boost", WM8971_LADCIN, WM8971_RADCIN, 4, 3, 0),
> +
> + /* Left OUT Mixer Control */
> + SOC_DOUBLE_R_TLV("Bypass Left Playback Volume", WM8971_LOUTM1,
> + WM8971_LOUTM2, 4, 7, 1, bypass_out_vol),
> +
> + /* Right OUT Mixer Control */
> + SOC_DOUBLE_R_TLV("Bypass Right Playback Volume", WM8971_ROUTM1,
> + WM8971_ROUTM2, 4, 7, 1, bypass_out_vol),
> +
> + /* Mono OUT Mixer Control */
> + SOC_DOUBLE_R_TLV("Bypass Mono Playback Volume", WM8971_MOUTM1,
> + WM8971_MOUTM2, 4, 7, 1, bypass_out_vol),
> +
> + /* LOUT2 & ROUT2 volume */
> + SOC_DOUBLE_R_TLV("Speaker Playback Volume", WM8971_LOUT2V,
> + WM8971_ROUT2V, 0, 127, 0, out_vol),
> + SOC_DOUBLE_R("Speaker Playback ZC Switch", WM8971_LOUT2V,
> + WM8971_ROUT2V, 7, 1, 0),
> +
> + /* MONOOUT volume */
> + SOC_SINGLE_TLV("Mono Playback Volume", WM8971_MOUTV,
> + 0, 127, 0, out_vol),
> + SOC_SINGLE("Mono Playback ZC Switch", WM8971_MOUTV, 7, 1, 0),
> +
> + SOC_SINGLE("Right Out 2", WM8971_PWR2, 3, 1, 0),
> + SOC_SINGLE("Left Out 2", WM8971_PWR2, 4, 1, 0),
> +};
A significant amount of these controls are shared with 8971 and I
don't think 8971 has any that 8973 lacks. So it would probably be
better to roll the TLV improvements into the existing 8971 array,
then fill this array only with the new controls for 8973 and
manually add those controls with snd_soc_add_codec_controls.
> +
> +
> /*
> * DAPM Controls
> */
> @@ -219,18 +483,34 @@ SOC_DAPM_SINGLE("Right Bypass Switch", WM8971_MOUTM2, 7, 1, 0),
> /* Left Line Mux */
> static const struct snd_kcontrol_new wm8971_left_line_controls =
> SOC_DAPM_ENUM("Route", wm8971_enum[8]);
> +static const struct snd_kcontrol_new wm8973_left_line_controls =
> +SOC_DAPM_ENUM("Route", left_line);
>
> /* Right Line Mux */
> static const struct snd_kcontrol_new wm8971_right_line_controls =
> SOC_DAPM_ENUM("Route", wm8971_enum[9]);
> +static const struct snd_kcontrol_new wm8973_right_line_controls =
> +SOC_DAPM_ENUM("Route", right_line);
>
> /* Left PGA Mux */
> static const struct snd_kcontrol_new wm8971_left_pga_controls =
> SOC_DAPM_ENUM("Route", wm8971_enum[10]);
> +static const struct snd_kcontrol_new wm8973_left_pga_controls =
> +SOC_DAPM_ENUM("Route", left_pga);
These three are the same control on both devices no need to
specify seperately.
>
> /* Right PGA Mux */
> static const struct snd_kcontrol_new wm8971_right_pga_controls =
> SOC_DAPM_ENUM("Route", wm8971_enum[11]);
> +static const struct snd_kcontrol_new wm8973_right_pga_controls =
> +SOC_DAPM_ENUM("Route", right_pga);
> +
> +/* Out 3 Mux */
> +static const struct snd_kcontrol_new wm8973_out3_controls =
> +SOC_DAPM_ENUM("Route", out3);
> +
> +/* Differential Mux */
> +static const struct snd_kcontrol_new wm8973_diffmux_controls =
> +SOC_DAPM_ENUM("Route", diffmux);
>
> /* Mono ADC Mux */
> static const struct snd_kcontrol_new wm8971_monomux_controls =
> @@ -238,14 +518,14 @@ SOC_DAPM_ENUM("Route", wm8971_enum[13]);
>
> static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
> SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
> - &wm8971_left_mixer_controls[0],
> - ARRAY_SIZE(wm8971_left_mixer_controls)),
> + &wm8971_left_mixer_controls[0],
> + ARRAY_SIZE(wm8971_left_mixer_controls)),
> SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0,
> - &wm8971_right_mixer_controls[0],
> - ARRAY_SIZE(wm8971_right_mixer_controls)),
> + &wm8971_right_mixer_controls[0],
> + ARRAY_SIZE(wm8971_right_mixer_controls)),
> SND_SOC_DAPM_MIXER("Mono Mixer", WM8971_PWR2, 2, 0,
> - &wm8971_mono_mixer_controls[0],
> - ARRAY_SIZE(wm8971_mono_mixer_controls)),
> + &wm8971_mono_mixer_controls[0],
> + ARRAY_SIZE(wm8971_mono_mixer_controls)),
>
> SND_SOC_DAPM_PGA("Right Out 2", WM8971_PWR2, 3, 0, NULL, 0),
> SND_SOC_DAPM_PGA("Left Out 2", WM8971_PWR2, 4, 0, NULL, 0),
> @@ -260,18 +540,18 @@ static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
> SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8971_PWR1, 3, 0),
>
> SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
> - &wm8971_left_pga_controls),
> + &wm8971_left_pga_controls),
> SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
> - &wm8971_right_pga_controls),
> + &wm8971_right_pga_controls),
> SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
> - &wm8971_left_line_controls),
> + &wm8971_left_line_controls),
> SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
> - &wm8971_right_line_controls),
> + &wm8971_right_line_controls),
>
> SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
> - &wm8971_monomux_controls),
> + &wm8971_monomux_controls),
> SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
> - &wm8971_monomux_controls),
> + &wm8971_monomux_controls),
>
> SND_SOC_DAPM_OUTPUT("LOUT1"),
> SND_SOC_DAPM_OUTPUT("ROUT1"),
> @@ -284,6 +564,69 @@ static const struct snd_soc_dapm_widget wm8971_dapm_widgets[] = {
> SND_SOC_DAPM_INPUT("MIC"),
> };
>
> +static const struct snd_soc_dapm_widget wm8973_dapm_widgets[] = {
> + SND_SOC_DAPM_MIXER("Left Mixer", SND_SOC_NOPM, 0, 0,
> + &wm8971_left_mixer_controls[0],
> + ARRAY_SIZE(wm8971_left_mixer_controls)),
> +
> + SND_SOC_DAPM_MIXER("Right Mixer", SND_SOC_NOPM, 0, 0,
> + &wm8971_right_mixer_controls[0],
> + ARRAY_SIZE(wm8971_right_mixer_controls)),
> +
> + SND_SOC_DAPM_MIXER("Mono Mixer", WM8971_PWR2, 2, 0,
> + &wm8971_mono_mixer_controls[0],
> + ARRAY_SIZE(wm8971_mono_mixer_controls)),
> +
> + SND_SOC_DAPM_PGA("Right Out 2", WM8971_PWR2, 3, 0, NULL, 0),
> + SND_SOC_DAPM_PGA("Left Out 2", WM8971_PWR2, 4, 0, NULL, 0),
> + SND_SOC_DAPM_PGA("Right Out 1", WM8971_PWR2, 5, 0, NULL, 0),
> + SND_SOC_DAPM_PGA("Left Out 1", WM8971_PWR2, 6, 0, NULL, 0),
> + SND_SOC_DAPM_DAC("Right DAC", "Right Playback", WM8971_PWR2, 7, 0),
> + SND_SOC_DAPM_DAC("Left DAC", "Left Playback", WM8971_PWR2, 8, 0),
> +
> + SND_SOC_DAPM_MICBIAS("Mic Bias", WM8971_PWR1, 1, 0),
> + SND_SOC_DAPM_ADC("Right ADC", "Right Capture", WM8971_PWR1, 2, 0),
> + SND_SOC_DAPM_ADC("Left ADC", "Left Capture", WM8971_PWR1, 3, 0),
> + SND_SOC_DAPM_MUX("Right PGA Mux", WM8971_PWR1, 4, 0,
> + &wm8973_right_pga_controls),
> + SND_SOC_DAPM_MUX("Left PGA Mux", WM8971_PWR1, 5, 0,
> + &wm8973_left_pga_controls),
> +
> + SND_SOC_DAPM_MUX("Left Line Mux", SND_SOC_NOPM, 0, 0,
> + &wm8973_left_line_controls),
> + SND_SOC_DAPM_MUX("Right Line Mux", SND_SOC_NOPM, 0, 0,
> + &wm8973_right_line_controls),
> +
> + SND_SOC_DAPM_MUX("Out3 Mux", SND_SOC_NOPM, 0, 0,
> + &wm8973_out3_controls),
> + SND_SOC_DAPM_PGA("Out 3", WM8971_PWR2, 1, 0, NULL, 0),
> +
> + SND_SOC_DAPM_PGA("Mono Out 1", WM8971_PWR2, 2, 0, NULL, 0),
> +
> + SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0,
> + &wm8973_diffmux_controls),
> +
> + SND_SOC_DAPM_MUX("Left ADC Mux", SND_SOC_NOPM, 0, 0,
> + &wm8971_monomux_controls),
> + SND_SOC_DAPM_MUX("Right ADC Mux", SND_SOC_NOPM, 0, 0,
> + &wm8971_monomux_controls),
> +
> + SND_SOC_DAPM_OUTPUT("LOUT1"),
> + SND_SOC_DAPM_OUTPUT("ROUT1"),
> + SND_SOC_DAPM_OUTPUT("LOUT2"),
> + SND_SOC_DAPM_OUTPUT("ROUT2"),
> + SND_SOC_DAPM_OUTPUT("MONO1"),
> + SND_SOC_DAPM_OUTPUT("OUT3"),
> + SND_SOC_DAPM_OUTPUT("VREF"),
> +
> + SND_SOC_DAPM_INPUT("LINPUT1"),
> + SND_SOC_DAPM_INPUT("LINPUT2"),
> + SND_SOC_DAPM_INPUT("LINPUT3"),
> + SND_SOC_DAPM_INPUT("RINPUT1"),
> + SND_SOC_DAPM_INPUT("RINPUT2"),
> + SND_SOC_DAPM_INPUT("RINPUT3"),
> +};
Again looks like we could share all the 8971 widgets and manually
add the extras.
> +
> static const struct snd_soc_dapm_route wm8971_dapm_routes[] = {
> /* left mixer */
> {"Left Mixer", "Playback Switch", "Left DAC"},
> @@ -361,6 +704,85 @@ static const struct snd_soc_dapm_route wm8971_dapm_routes[] = {
> {"Right ADC", NULL, "Right ADC Mux"},
> };
>
> +static const struct snd_soc_dapm_route wm8973_dapm_routes[] = {
> + {"Left Mixer", "Playback Switch", "Left DAC"},
> + {"Left Mixer", "Left Bypass Switch", "Left Line Mux"},
> + {"Left Mixer", "Right Playback Switch", "Right DAC"},
> + {"Left Mixer", "Right Bypass Switch", "Right Line Mux"},
> +
> + {"Right Mixer", "Left Playback Switch", "Left DAC"},
> + {"Right Mixer", "Left Bypass Switch", "Left Line Mux"},
> + {"Right Mixer", "Playback Switch", "Right DAC"},
> + {"Right Mixer", "Right Bypass Switch", "Right Line Mux"},
> +
> + {"Left Out 1", NULL, "Left Mixer"},
> + {"LOUT1", NULL, "Left Out 1"},
> +
> + {"Left Out 2", NULL, "Left Mixer"},
> + {"LOUT2", NULL, "Left Out 2"},
> +
> + {"Right Out 1", NULL, "Right Mixer"},
> + {"ROUT1", NULL, "Right Out 1"},
> +
> + {"Right Out 2", NULL, "Right Mixer"},
> + {"ROUT2", NULL, "Right Out 2"},
> +
> + {"Mono Mixer", "Left Playback Switch", "Left DAC"},
> + {"Mono Mixer", "Left Bypass Switch", "Left Line Mux"},
> + {"Mono Mixer", "Right Playback Switch", "Right DAC"},
> + {"Mono Mixer", "Right Bypass Switch", "Right Line Mux"},
> +
> + {"Mono Out 1", NULL, "Mono Mixer"},
> + {"MONO1", NULL, "Mono Out 1"},
> +
> + {"Out3 Mux", "VREF", "VREF"},
> + {"Out3 Mux", "ROUT1 + Vol", "ROUT1"},
> + {"Out3 Mux", "ROUT1", "Right Mixer"},
> + {"Out3 Mux", "MonoOut", "MONO1"},
> + {"Out 3", NULL, "Out3 Mux"},
> + {"OUT3", NULL, "Out 3"},
> +
> + {"Left Line Mux", "Line 1", "LINPUT1"},
> + {"Left Line Mux", "Line 2", "LINPUT2"},
> + {"Left Line Mux", "Line 3", "LINPUT3"},
> + {"Left Line Mux", "PGA", "Left PGA Mux"},
> + {"Left Line Mux", "Differential", "Differential Mux"},
> +
> + {"Right Line Mux", "Line 1", "RINPUT1"},
> + {"Right Line Mux", "Line 2", "RINPUT2"},
> + {"Right Line Mux", "Line 3", "RINPUT3"},
> + /* {"Right Line Mux", "Mic", "MIC"}, */
> + {"Right Line Mux", "PGA", "Right PGA Mux"},
> + {"Right Line Mux", "Differential", "Differential Mux"},
> +
> + {"Left PGA Mux", "Line 1", "LINPUT1"},
> + {"Left PGA Mux", "Line 2", "LINPUT2"},
> + {"Left PGA Mux", "Line 3", "LINPUT3"},
> + {"Left PGA Mux", "Differential", "Differential Mux"},
> +
> + {"Right PGA Mux", "Line 1", "RINPUT1"},
> + {"Right PGA Mux", "Line 2", "RINPUT2"},
> + {"Right PGA Mux", "Line 3", "RINPUT3"},
> + {"Right PGA Mux", "Differential", "Differential Mux"},
> +
> + {"Differential Mux", "Line 1", "LINPUT1"},
> + {"Differential Mux", "Line 1", "RINPUT1"},
> + {"Differential Mux", "Line 2", "LINPUT2"},
> + {"Differential Mux", "Line 2", "RINPUT2"},
> +
> + {"Left ADC Mux", "Stereo", "Left PGA Mux"},
> + {"Left ADC Mux", "Mono (Left)", "Left PGA Mux"},
> + {"Left ADC Mux", "Digital Mono", "Left PGA Mux"},
> +
> + {"Right ADC Mux", "Stereo", "Right PGA Mux"},
> + {"Right ADC Mux", "Mono (Right)", "Right PGA Mux"},
> + {"Right ADC Mux", "Digital Mono", "Right PGA Mux"},
> +
> + {"Left ADC", NULL, "Left ADC Mux"},
> + {"Right ADC", NULL, "Right ADC Mux"},
> +};
Again here.
> +
> +
> struct _coeff_div {
> u32 mclk;
> u32 rate;
> @@ -430,26 +852,90 @@ static int get_coeff(int mclk, int rate)
> return -EINVAL;
> }
>
> +/* The set of rates we can generate from the above for each SYSCLK */
> +static const unsigned int rates_12288[] = {
> + 8000, 12000, 16000, 24000, 32000, 48000, 96000
> +};
> +
> +static struct snd_pcm_hw_constraint_list constraints_12288 = {
> + .count = ARRAY_SIZE(rates_12288),
> + .list = rates_12288,
> +};
> +
> +static const unsigned int rates_112896[] = {
> + 8000, 11025, 22050, 44100, 88200
> +};
> +
> +static struct snd_pcm_hw_constraint_list constraints_112896 = {
> + .count = ARRAY_SIZE(rates_112896),
> + .list = rates_112896,
> +};
> +
> +static const unsigned int rates_18432[] = {
> + 8000, 12000, 16000, 24000, 32000, 48000, 96000
> +};
> +
> +static struct snd_pcm_hw_constraint_list constraints_18432 = {
> + .count = ARRAY_SIZE(rates_18432),
> + .list = rates_18432,
> +};
> +
> +static const unsigned int rates_169344[] = {
> + 8000, 11025, 22050, 44100, 88200
> +};
> +
> +static struct snd_pcm_hw_constraint_list constraints_169344 = {
> + .count = ARRAY_SIZE(rates_169344),
> + .list = rates_169344,
> +};
> +
> +static const unsigned int rates_12[] = {
> + 8000, 11025, 12000, 16000, 22050, 2400, 32000, 41100, 48000,
> + 48000, 88235, 96000,
> +};
> +
> +static struct snd_pcm_hw_constraint_list constraints_12 = {
> + .count = ARRAY_SIZE(rates_12),
> + .list = rates_12,
> +};
> +
> static int wm8971_set_dai_sysclk(struct snd_soc_dai *codec_dai,
> - int clk_id, unsigned int freq, int dir)
> + int clk_id, unsigned int freq, int dir)
> {
> struct snd_soc_codec *codec = codec_dai->codec;
> struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
>
> switch (freq) {
> - case 11289600:
> - case 12000000:
> case 12288000:
> - case 16934400:
> + case 24576000:
> + wm8971->sysclk_constraints = &constraints_12288;
> + break;
> + case 11289600:
> + case 22579200:
> + wm8971->sysclk_constraints = &constraints_112896;
> + break;
> case 18432000:
> - wm8971->sysclk = freq;
> - return 0;
> + wm8971->sysclk_constraints = &constraints_18432;
> + break;
> + case 16934400:
> + case 33868800:
> + wm8971->sysclk_constraints = &constraints_169344;
> + break;
> + case 12000000:
> + case 24000000:
> + wm8971->sysclk_constraints = &constraints_12;
> + break;
> + default:
> + return -EINVAL;
> }
> - return -EINVAL;
> +
> + wm8971->sysclk = freq;
> +
> + return 0;
> }
Perhaps a seperate patch adding the constraint support.
>
> static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
> - unsigned int fmt)
> + unsigned int fmt)
> {
> struct snd_soc_codec *codec = codec_dai->codec;
> u16 iface = 0;
> @@ -507,8 +993,8 @@ static int wm8971_set_dai_fmt(struct snd_soc_dai *codec_dai,
> }
>
> static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream,
> - struct snd_pcm_hw_params *params,
> - struct snd_soc_dai *dai)
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> {
> struct snd_soc_codec *codec = dai->codec;
> struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> @@ -516,6 +1002,8 @@ static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream,
> u16 srate = snd_soc_read(codec, WM8971_SRATE) & 0x1c0;
> int coeff = get_coeff(wm8971->sysclk, params_rate(params));
>
> + wm8971->playback_fs = params_rate(params);
> +
> /* bit size */
> switch (params_format(params)) {
> case SNDRV_PCM_FORMAT_S16_LE:
> @@ -531,6 +1019,8 @@ static int wm8971_pcm_hw_params(struct snd_pcm_substream *substream,
> break;
> }
>
> + wm8973_set_deemph(codec);
> +
> /* set iface & srate */
> snd_soc_write(codec, WM8971_IFACE, iface);
> if (coeff >= 0)
> @@ -553,23 +1043,31 @@ static int wm8971_mute(struct snd_soc_dai *dai, int mute)
> }
>
> static int wm8971_set_bias_level(struct snd_soc_codec *codec,
> - enum snd_soc_bias_level level)
> + enum snd_soc_bias_level level)
> {
> - u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> + static const u16 mask[][2] = {
> + [VARIANT_WM8971] = { 0x00c1, 0x0140 },
> + [VARIANT_WM8973] = { 0x00c2, 0x0141 },
> + };
> + u16 pwr_reg = snd_soc_read(codec, WM8971_PWR1) &
> + charge[wm8971->variant][0];
>
> switch (level) {
> case SND_SOC_BIAS_ON:
> /* set vmid to 50k and unmute dac */
> - snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x00c1);
> + snd_soc_write(codec, WM8971_PWR1, pwr_reg |
> + mask[wm8971->variant][0]);
> break;
> case SND_SOC_BIAS_PREPARE:
> break;
> case SND_SOC_BIAS_STANDBY:
> if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
> - snd_soc_cache_sync(codec);
> + regcache_sync(wm8971->regmap);
>
> /* mute dac and set vmid to 500k, enable VREF */
> - snd_soc_write(codec, WM8971_PWR1, pwr_reg | 0x0140);
> + snd_soc_write(codec, WM8971_PWR1, pwr_reg |
> + mask[wm8971->variant][1]);
> break;
> case SND_SOC_BIAS_OFF:
> snd_soc_write(codec, WM8971_PWR1, 0x0001);
> @@ -580,8 +1078,9 @@ static int wm8971_set_bias_level(struct snd_soc_codec *codec,
> }
>
> #define WM8971_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
> - SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
> - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
> + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
> + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \
> + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
>
> #define WM8971_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
> SNDRV_PCM_FMTBIT_S24_LE)
> @@ -593,74 +1092,81 @@ static const struct snd_soc_dai_ops wm8971_dai_ops = {
> .set_sysclk = wm8971_set_dai_sysclk,
> };
>
> -static struct snd_soc_dai_driver wm8971_dai = {
> - .name = "wm8971-hifi",
> - .playback = {
> - .stream_name = "Playback",
> - .channels_min = 1,
> - .channels_max = 2,
> - .rates = WM8971_RATES,
> - .formats = WM8971_FORMATS,},
> - .capture = {
> - .stream_name = "Capture",
> - .channels_min = 1,
> - .channels_max = 2,
> - .rates = WM8971_RATES,
> - .formats = WM8971_FORMATS,},
> - .ops = &wm8971_dai_ops,
> -};
> -
> -static void wm8971_work(struct work_struct *work)
> -{
> - struct snd_soc_dapm_context *dapm =
> - container_of(work, struct snd_soc_dapm_context,
> - delayed_work.work);
> - struct snd_soc_codec *codec = dapm->codec;
> - wm8971_set_bias_level(codec, codec->dapm.bias_level);
> -}
> +static struct snd_soc_dai_driver wm8971_dai[] = {
> + {
> + .name = "wm8971-hifi-playback",
> + .playback = {
> + .stream_name = "Playback",
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = WM8971_RATES,
> + .formats = WM8971_FORMATS,
> + },
> + .ops = &wm8971_dai_ops,
> + }, {
> + .name = "wm8971-hifi-capture",
> + .capture = {
> + .stream_name = "Capture",
> + .channels_min = 1,
> + .channels_max = 2,
> + .rates = WM8971_RATES,
> + .formats = WM8971_FORMATS,
> + },
> + .ops = &wm8971_dai_ops,
> + },
> +};
>
> static int wm8971_suspend(struct snd_soc_codec *codec)
> {
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> +
> wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
> + regcache_mark_dirty(wm8971->regmap);
> +
> return 0;
> }
>
> static int wm8971_resume(struct snd_soc_codec *codec)
> {
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> u16 reg;
>
> wm8971_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
>
> /* charge wm8971 caps */
> - if (codec->dapm.suspend_bias_level == SND_SOC_BIAS_ON) {
> - reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
> - snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
> - codec->dapm.bias_level = SND_SOC_BIAS_ON;
> - queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
> - msecs_to_jiffies(1000));
> - }
> + if (codec->dapm.suspend_bias_level != SND_SOC_BIAS_ON)
> + return 0;
> +
> + reg = snd_soc_read(codec, WM8971_PWR1) & charge[wm8971->variant][0];
> + snd_soc_write(codec, WM8971_PWR1, reg | charge[wm8971->variant][1]);
> + codec->dapm.bias_level = SND_SOC_BIAS_ON;
>
> return 0;
> }
>
> static int wm8971_probe(struct snd_soc_codec *codec)
> {
> + struct wm8971_priv *wm8971 = snd_soc_codec_get_drvdata(codec);
> + const u32 *p;
> int ret = 0;
> u16 reg;
>
> - INIT_DELAYED_WORK(&codec->dapm.delayed_work, wm8971_work);
> - wm8971_workq = create_workqueue("wm8971");
> - if (wm8971_workq == NULL)
> - return -ENOMEM;
> + codec->control_data = wm8971->regmap;
>
> wm8971_reset(codec);
> + if (codec->dev->of_node) {
> + p = of_get_property(codec->dev->of_node, "mclk-div", NULL);
> + if (p)
> + wm8971->mclk_div = be32_to_cpu(*p);
> + }
> + /* Master Clock Divide by 2 (0 = not div, 1 = div by 2) */
> + if (wm8971->mclk_div)
> + snd_soc_update_bits(codec, WM8971_SRATE, 0x0040, 0x0040);
>
> /* charge output caps - set vmid to 5k for quick power up */
> - reg = snd_soc_read(codec, WM8971_PWR1) & 0xfe3e;
> - snd_soc_write(codec, WM8971_PWR1, reg | 0x01c0);
> + reg = snd_soc_read(codec, WM8971_PWR1) & charge[wm8971->variant][0];
> + snd_soc_write(codec, WM8971_PWR1, reg | charge[wm8971->variant][1]);
> codec->dapm.bias_level = SND_SOC_BIAS_STANDBY;
> - queue_delayed_work(wm8971_workq, &codec->dapm.delayed_work,
> - msecs_to_jiffies(1000));
>
> /* set the update bits */
> snd_soc_update_bits(codec, WM8971_LDAC, 0x0100, 0x0100);
> @@ -681,24 +1187,47 @@ static int wm8971_remove(struct snd_soc_codec *codec)
> {
> wm8971_set_bias_level(codec, SND_SOC_BIAS_OFF);
>
> - if (wm8971_workq)
> - destroy_workqueue(wm8971_workq);
> return 0;
> }
>
> -static struct snd_soc_codec_driver soc_codec_dev_wm8971 = {
> - .probe = wm8971_probe,
> - .remove = wm8971_remove,
> - .suspend = wm8971_suspend,
> - .resume = wm8971_resume,
> - .set_bias_level = wm8971_set_bias_level,
> +struct regmap *wm8973_get_regmap(struct device *dev)
> +{
> + struct wm8971_priv *priv = dev_get_drvdata(dev);
> +
> + return priv->regmap;
> +}
>
> - .controls = wm8971_snd_controls,
> - .num_controls = ARRAY_SIZE(wm8971_snd_controls),
> - .dapm_widgets = wm8971_dapm_widgets,
> - .num_dapm_widgets = ARRAY_SIZE(wm8971_dapm_widgets),
> - .dapm_routes = wm8971_dapm_routes,
> - .num_dapm_routes = ARRAY_SIZE(wm8971_dapm_routes),
> +static struct snd_soc_codec_driver soc_codec_dev_wm8971[] = {
> + [VARIANT_WM8971] = {
> + .probe = wm8971_probe,
> + .remove = wm8971_remove,
> + .suspend = wm8971_suspend,
> + .resume = wm8971_resume,
> + .set_bias_level = wm8971_set_bias_level,
> + .get_regmap = wm8973_get_regmap,
> +
> + .controls = wm8971_snd_controls,
> + .num_controls = ARRAY_SIZE(wm8971_snd_controls),
> + .dapm_widgets = wm8971_dapm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(wm8971_dapm_widgets),
> + .dapm_routes = wm8971_dapm_routes,
> + .num_dapm_routes = ARRAY_SIZE(wm8971_dapm_routes),
> + },
> + [VARIANT_WM8973] = {
> + .probe = wm8971_probe,
> + .remove = wm8971_remove,
> + .suspend = wm8971_suspend,
> + .resume = wm8971_resume,
> + .set_bias_level = wm8971_set_bias_level,
> + .get_regmap = wm8973_get_regmap,
> +
> + .controls = wm8973_snd_controls,
> + .num_controls = ARRAY_SIZE(wm8973_snd_controls),
> + .dapm_widgets = wm8973_dapm_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(wm8973_dapm_widgets),
> + .dapm_routes = wm8973_dapm_routes,
> + .num_dapm_routes = ARRAY_SIZE(wm8973_dapm_routes),
> + }
> };
>
> static const struct regmap_config wm8971_regmap = {
> @@ -715,7 +1244,6 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
> const struct i2c_device_id *id)
> {
> struct wm8971_priv *wm8971;
> - struct regmap *regmap;
> int ret;
>
> wm8971 = devm_kzalloc(&i2c->dev, sizeof(struct wm8971_priv),
> @@ -723,14 +1251,17 @@ static int wm8971_i2c_probe(struct i2c_client *i2c,
> if (wm8971 == NULL)
> return -ENOMEM;
>
> - regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
> - if (IS_ERR(regmap))
> - return PTR_ERR(regmap);
> + wm8971->variant = (int)id->driver_data;
> +
> + wm8971->regmap = devm_regmap_init_i2c(i2c, &wm8971_regmap);
> + if (IS_ERR(wm8971->regmap))
> + return PTR_ERR(wm8971->regmap);
>
> i2c_set_clientdata(i2c, wm8971);
>
> ret = snd_soc_register_codec(&i2c->dev,
> - &soc_codec_dev_wm8971, &wm8971_dai, 1);
> + &soc_codec_dev_wm8971[wm8971->variant],
> + wm8971_dai, ARRAY_SIZE(wm8971_dai));
>
> return ret;
> }
> @@ -742,15 +1273,23 @@ static int wm8971_i2c_remove(struct i2c_client *client)
> }
>
> static const struct i2c_device_id wm8971_i2c_id[] = {
> - { "wm8971", 0 },
> + { "wm8971", VARIANT_WM8971 },
> + { "wm8973", VARIANT_WM8973 },
> { }
> };
> MODULE_DEVICE_TABLE(i2c, wm8971_i2c_id);
>
> +static const struct of_device_id wm897x_dt_ids[] = {
> + { .compatible = "wlf,wm8971" },
> + { .compatible = "wlf,wm8973" },
> + { /* sentinel */ }
> +};
> +
> static struct i2c_driver wm8971_i2c_driver = {
> .driver = {
> .name = "wm8971",
> .owner = THIS_MODULE,
> + .of_match_table = wm897x_dt_ids,
> },
> .probe = wm8971_i2c_probe,
> .remove = wm8971_i2c_remove,
> @@ -762,3 +1301,5 @@ module_i2c_driver(wm8971_i2c_driver);
> MODULE_DESCRIPTION("ASoC WM8971 driver");
> MODULE_AUTHOR("Lab126");
> MODULE_LICENSE("GPL");
> +MODULE_ALIAS("*wm8971*");
> +MODULE_ALIAS("*wm8973*");
> diff --git a/sound/soc/codecs/wm8971.h b/sound/soc/codecs/wm8971.h
> index f31c38f..aeab04a 100644
> --- a/sound/soc/codecs/wm8971.h
> +++ b/sound/soc/codecs/wm8971.h
> @@ -22,21 +22,22 @@
> #define WM8971_ADCDAC 0x05
> #define WM8971_IFACE 0x07
> #define WM8971_SRATE 0x08
> -#define WM8971_LDAC 0x0a
> -#define WM8971_RDAC 0x0b
> -#define WM8971_BASS 0x0c
> +#define WM8971_LDAC 0x0a
> +#define WM8971_RDAC 0x0b
> +#define WM8971_BASS 0x0c
> #define WM8971_TREBLE 0x0d
> #define WM8971_RESET 0x0f
> -#define WM8971_ALC1 0x11
> -#define WM8971_ALC2 0x12
> -#define WM8971_ALC3 0x13
> +#define WM8973_3D 0x10
> +#define WM8971_ALC1 0x11
> +#define WM8971_ALC2 0x12
> +#define WM8971_ALC3 0x13
> #define WM8971_NGATE 0x14
> -#define WM8971_LADC 0x15
> -#define WM8971_RADC 0x16
> +#define WM8971_LADC 0x15
> +#define WM8971_RADC 0x16
> #define WM8971_ADCTL1 0x17
> #define WM8971_ADCTL2 0x18
> -#define WM8971_PWR1 0x19
> -#define WM8971_PWR2 0x1a
> +#define WM8971_PWR1 0x19
> +#define WM8971_PWR2 0x1a
> #define WM8971_ADCTL3 0x1b
> #define WM8971_ADCIN 0x1f
> #define WM8971_LADCIN 0x20
> --
> 1.7.9.5
>
More information about the Alsa-devel
mailing list