[alsa-devel] [PATCH] ALSA: hda - More pop noise fixes for Dell XPS 13 9333
Takashi Iwai
tiwai at suse.de
Fri Aug 8 12:13:38 CEST 2014
At Fri, 08 Aug 2014 10:49:25 +0200,
Gabriele Mazzotta wrote:
>
> On Friday 08 August 2014 08:11:18 Takashi Iwai wrote:
> > At Thu, 07 Aug 2014 18:35:39 +0200,
> > Gabriele Mazzotta wrote:
> > >
> > > On init, mic-in is always set as input source, indipendently on what
> > > is plugged in. Since setting/unsetting mic-in as input source causes
> > > a pop noise, make sure the internal microphone is selected as input
> > > source on boot.
> > >
> > > On shutdown, make sure the codec is not suspended as that would cause
> > > a pop noise.
> > >
> > > Signed-off-by: Gabriele Mazzotta <gabriele.mzt at gmail.com>
> > > ---
> > > sound/pci/hda/hda_codec.c | 2 ++
> > > sound/pci/hda/hda_codec.h | 1 +
> > > sound/pci/hda/patch_realtek.c | 12 ++++++++++++
> > > 3 files changed, 15 insertions(+)
> > >
> > > diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
> > > index 4c20277..92d8292 100644
> > > --- a/sound/pci/hda/hda_codec.c
> > > +++ b/sound/pci/hda/hda_codec.c
> > > @@ -5348,6 +5348,8 @@ void snd_hda_bus_reboot_notify(struct hda_bus *bus)
> > > if (!bus)
> > > return;
> > > list_for_each_entry(codec, &bus->codec_list, list) {
> > > + if (codec->resume_at_reboot)
> > > + hda_call_codec_resume(codec);
> >
> > Do you really need the resume at reboot? I thought the codec needs
> > power down at reboot, i.e. rather it needs suspend.
>
> Yes, the pop noise happens if it's suspended.
Then the patch is wrong in anyway. You cannot call it
unconditionally. The codec might be still active, and calling resume
in that state does re-initialize the whole things doubly.
> Now that I payed more attention, the pop noise happens only when
> rebooting the laptop and not when powering it down.
> Also, the noise is heard quite late, I think the kernel is no longer
> running when I hear it.
> I will try to better understand what is actually happening and why
> resuming prevents the noise.
If so, it might be BIOS causes the noise by re-initializing the
codec.
Takashi
> > Since you apply actually two individual changes, it's better to split
> > patches: one for adding the power-down at reboot, another for
> > initializing cur_mux properly.
> >
> > Also, it's recommended to put a bugzilla link in the changelog, so
> > that other people can follow the information and discussion.
> >
> > Last but not least, please put maintainers to Cc at the next time, so
> > that it won't be missed.
>
> I will do it.
>
> Thanks,
>
> Gabriele
>
> >
> > thanks,
> >
> > Takashi
> >
> > > if (hda_codec_is_power_on(codec) &&
> > > codec->patch_ops.reboot_notify)
> > > codec->patch_ops.reboot_notify(codec);
> > > diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
> > > index 5825aa1..5c3c66e 100644
> > > --- a/sound/pci/hda/hda_codec.h
> > > +++ b/sound/pci/hda/hda_codec.h
> > > @@ -366,6 +366,7 @@ struct hda_codec {
> > > unsigned int cached_write:1; /* write only to caches */
> > > unsigned int dp_mst:1; /* support DP1.2 Multi-stream transport */
> > > unsigned int dump_coef:1; /* dump processing coefs in codec proc file */
> > > + unsigned int resume_at_reboot:1; /* resume codec at reboot */
> > > #ifdef CONFIG_PM
> > > unsigned int power_on :1; /* current (global) power-state */
> > > unsigned int d3_stop_clk:1; /* support D3 operation without BCLK */
> > > diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> > > index b60824e..defaa2a 100644
> > > --- a/sound/pci/hda/patch_realtek.c
> > > +++ b/sound/pci/hda/patch_realtek.c
> > > @@ -4018,8 +4018,20 @@ static void alc_fixup_dell_xps13(struct hda_codec *codec,
> > > {
> > > if (action == HDA_FIXUP_ACT_PROBE) {
> > > struct alc_spec *spec = codec->spec;
> > > + struct hda_input_mux *imux = &spec->gen.input_mux;
> > > + int i;
> > > +
> > > spec->shutup = alc_no_shutup;
> > > codec->power_filter = alc_power_filter_xps13;
> > > + codec->resume_at_reboot = 1;
> > > +
> > > + /* Make the internal mic the default input source. */
> > > + for (i = 0; i < imux->num_items; i++) {
> > > + if (spec->gen.imux_pins[i] == 0x12) {
> > > + spec->gen.cur_mux[0] = i;
> > > + break;
> > > + }
> > > + }
> > > }
> > > }
> > >
> >
>
More information about the Alsa-devel
mailing list