[alsa-devel] [PATCH v5 DTS 2/4] ARM/dts: am33xx: mcasp: Add location for data port registers to reg-property

[Jyri Sarha]

This patch adds a second tuple to reg property. The new property tuple
describes the memory location for data port registers mapped trough
L3 bus on am33xx. The both property tuples are named accordingly in
the reg-names property.

Signed-off-by: Hebbar, Gururaja <gururaja.hebbar at ti.com>
Signed-off-by: Darren Etheridge <detheridge at ti.com>
Signed-off-by: Jyri Sarha <jsarha at ti.com>
---
 arch/arm/boot/dts/am33xx.dtsi |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 861382f..3465d4b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -746,7 +746,9 @@
 		mcasp0: mcasp at 48038000 {
 			compatible = "ti,am33xx-mcasp-audio";
 			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>;
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
 			interrupts = <80>, <81>;
 			interrupts-names = "tx", "rx";
 			status = "disabled";
@@ -758,7 +760,9 @@
 		mcasp1: mcasp at 4803C000 {
 			compatible = "ti,am33xx-mcasp-audio";
 			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>;
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
 			interrupts = <82>, <83>;
 			interrupts-names = "tx", "rx";
 			status = "disabled";
-- 
1.7.9.5