[alsa-devel] [PATCH 3/3] ASoC: cs42l73: Add Device Tree support for CS42L73

[Brian Austin]

This patch adds device tree support for the cs42l73 codec.
Reset Gpio and Charge Pump Frequency are available

Signed-off-by: Brian Austin <brian.austin at cirrus.com>
---
 .../devicetree/bindings/sound/cs42l73.txt          | 22 +++++++++++++++
 sound/soc/codecs/cs42l73.c                         | 31 +++++++++++++++++++---
 2 files changed, 50 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/cs42l73.txt

diff --git a/Documentation/devicetree/bindings/sound/cs42l73.txt b/Documentation/devicetree/bindings/sound/cs42l73.txt
new file mode 100644
index 0000000..5a86495
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l73.txt
@@ -0,0 +1,22 @@
+CS42L73 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l73"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - reset_gpio : a GPIO spec for the reset pin
+  - chgfreq    : Charge Pump Frequency values 0x00-0x0F
+
+
+Example:
+
+codec: cs42l73 at 4a {
+	compatible = "cirrus,cs42l73";
+	reg = <0x4a>;
+	reset_gpio = <&gpio 10 0>;
+	chgfreq = <0x05>;
+};
\ No newline at end of file
diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c
index e3187cc..4607958 100644
--- a/sound/soc/codecs/cs42l73.c
+++ b/sound/soc/codecs/cs42l73.c
@@ -17,7 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
@@ -1414,6 +1414,7 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client,
 	struct cs42l73_private *cs42l73;
 	struct cs42l73_platform_data *pdata = dev_get_platdata(&i2c_client->dev);
 	int ret;
+	u32 val32;
 	unsigned int devid = 0;
 	unsigned int reg;
 
@@ -1431,9 +1432,26 @@ static int cs42l73_i2c_probe(struct i2c_client *i2c_client,
 		return ret;
 	}
 
-	if (pdata)
+	if (pdata) {
 		cs42l73->pdata = *pdata;
-
+	} else {
+		pdata = devm_kzalloc(&i2c_client->dev,
+				     sizeof(struct cs42l73_platform_data),
+				GFP_KERNEL);
+		if (!pdata) {
+			dev_err(&i2c_client->dev, "could not allocate pdata\n");
+			return -ENOMEM;
+		}
+		if (i2c_client->dev.of_node) {
+			if (of_property_read_u32(i2c_client->dev.of_node,
+				"chgfreq", &val32) >= 0)
+				pdata->chgfreq = val32;
+		}
+		pdata->reset_gpio = of_get_named_gpio(i2c_client->dev.of_node,
+						"reset-gpio", 0);
+		cs42l73->pdata = *pdata;
+	}
+
 	i2c_set_clientdata(i2c_client, cs42l73);
 
 	if ( cs42l73->pdata.reset_gpio) {
@@ -1493,6 +1511,12 @@ static int cs42l73_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct of_device_id cs42l73_of_match[] = {
+	{ .compatible = "cirrus,cs42l73", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cs42l73_of_match);
+
 static const struct i2c_device_id cs42l73_id[] = {
 	{"cs42l73", 0},
 	{}
@@ -1504,6 +1528,7 @@ static struct i2c_driver cs42l73_i2c_driver = {
 	.driver = {
 		   .name = "cs42l73",
 		   .owner = THIS_MODULE,
+		   .of_match_table = cs42l73_of_match,
 		   },
 	.id_table = cs42l73_id,
 	.probe = cs42l73_i2c_probe,
-- 
1.8.4.rc3