[alsa-devel] [PATCH 14/20] ASoC: davinci-mcasp: Be consistent with the use of base in davinci_mcasp_set_dai_fmt

Peter Ujfalusi peter.ujfalusi at ti.com
Thu Nov 14 10:35:30 CET 2013


Replace mcasp->base use with plain base in the davinci_mcasp_set_dai_fmt()
function since it has been already used by the remaining part of the function.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
 sound/soc/davinci/davinci-mcasp.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index bd85c98..1341f327 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -243,17 +243,17 @@ static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_DSP_B:
 	case SND_SOC_DAIFMT_AC97:
-		mcasp_clr_bits(mcasp->base + DAVINCI_MCASP_TXFMCTL_REG, FSXDUR);
-		mcasp_clr_bits(mcasp->base + DAVINCI_MCASP_RXFMCTL_REG, FSRDUR);
+		mcasp_clr_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXDUR);
+		mcasp_clr_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRDUR);
 		break;
 	default:
 		/* configure a full-word SYNC pulse (LRCLK) */
-		mcasp_set_bits(mcasp->base + DAVINCI_MCASP_TXFMCTL_REG, FSXDUR);
-		mcasp_set_bits(mcasp->base + DAVINCI_MCASP_RXFMCTL_REG, FSRDUR);
+		mcasp_set_bits(base + DAVINCI_MCASP_TXFMCTL_REG, FSXDUR);
+		mcasp_set_bits(base + DAVINCI_MCASP_RXFMCTL_REG, FSRDUR);
 
 		/* make 1st data bit occur one ACLK cycle after the frame sync */
-		mcasp_set_bits(mcasp->base + DAVINCI_MCASP_TXFMT_REG, FSXDLY(1));
-		mcasp_set_bits(mcasp->base + DAVINCI_MCASP_RXFMT_REG, FSRDLY(1));
+		mcasp_set_bits(base + DAVINCI_MCASP_TXFMT_REG, FSXDLY(1));
+		mcasp_set_bits(base + DAVINCI_MCASP_RXFMT_REG, FSRDLY(1));
 		break;
 	}
 
-- 
1.8.4.2



More information about the Alsa-devel mailing list