[alsa-devel] [PATCH 2/3] ALSA: hda - hdmi: Skip out-of-range latency values in AMD ELD generator
Anssi Hannula
anssi.hannula at iki.fi
Sun Nov 10 19:56:11 CET 2013
The ATI/AMD video/audio latencies are specified in apparent HDMI VSDB
format. In this format values above 251 are not valid (or stream
component is not supported - 255), but no checking is performed since
this was not mentioned in the AMD HDA verbs specification.
Check that the latencies are valid before using them, and add a comment
describing the formats.
Signed-off-by: Anssi Hannula <anssi.hannula at iki.fi>
---
sound/pci/hda/hda_eld.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index e8c55f5a34ff..9b697a28cf53 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -768,13 +768,28 @@ int snd_hdmi_get_eld_ati(struct hda_codec *codec, hda_nid_t nid,
return -EINVAL;
}
+ /*
+ * HDMI VSDB latency format:
+ * separately for both audio and video:
+ * 0 field not valid or unknown latency
+ * [1..251] msecs = (x-1)*2 (max 500ms with x = 251 = 0xfb)
+ * 255 audio/video not supported
+ *
+ * HDA latency format:
+ * single value indicating video latency relative to audio:
+ * 0 unknown or 0ms
+ * [1..250] msecs = x*2 (max 500ms with x = 250 = 0xfa)
+ * [251..255] reserved
+ */
aud_synch = snd_hda_codec_read(codec, nid, 0, ATI_VERB_GET_AUDIO_VIDEO_DELAY, 0);
if ((aud_synch & ATI_DELAY_VIDEO_LATENCY) && (aud_synch & ATI_DELAY_AUDIO_LATENCY)) {
- int video_latency = (aud_synch & ATI_DELAY_VIDEO_LATENCY) - 1;
- int audio_latency = ((aud_synch & ATI_DELAY_AUDIO_LATENCY) >> 8) - 1;
+ int video_latency_hdmi = (aud_synch & ATI_DELAY_VIDEO_LATENCY);
+ int audio_latency_hdmi = (aud_synch & ATI_DELAY_AUDIO_LATENCY) >> 8;
- if (video_latency > audio_latency)
- buf[6] = min(video_latency - audio_latency, 0xfa);
+ if (video_latency_hdmi <= 0xfb && audio_latency_hdmi <= 0xfb &&
+ video_latency_hdmi > audio_latency_hdmi)
+ buf[6] = video_latency_hdmi - audio_latency_hdmi;
+ /* else unknown/invalid or 0ms or video ahead of audio, so use zero */
}
/* Baseline length */
--
1.8.1.5
More information about the Alsa-devel
mailing list