[alsa-devel] [PATCH 07/10] ASoC: blackfin: Switch bf5xx-ad193x from bf5xx-tdm to bf5xx-i2s
Lars-Peter Clausen
lars at metafoo.de
Tue May 28 19:22:15 CEST 2013
The bf5xx-i2s driver now has support for TDM mode and the bf5xx-tdm driver is
going to be removed soon, so switch the driver over to bf5xx-i2s.
Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
---
sound/soc/blackfin/Kconfig | 18 +++++++++---------
sound/soc/blackfin/bf5xx-ad193x.c | 39 ++++++++++-----------------------------
2 files changed, 19 insertions(+), 38 deletions(-)
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index 16b88f5..906c349 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -56,6 +56,15 @@ config SND_SOC_BFIN_EVAL_ADAV80X
Note: This driver assumes that the ADAV80X digital record and playback
interfaces are connected to the first SPORT port on the BF5XX board.
+config SND_BF5XX_SOC_AD193X
+ tristate "SoC AD193X Audio support for Blackfin"
+ depends on SND_BF5XX_I2S
+ select SND_BF5XX_SOC_I2S
+ select SND_SOC_AD193X
+ help
+ Say Y if you want to add support for AD193X codec on Blackfin.
+ This driver supports AD1936, AD1937, AD1938 and AD1939.
+
config SND_BF5XX_SOC_AD73311
tristate "SoC AD73311 Audio support for Blackfin"
depends on SND_BF5XX_I2S
@@ -90,15 +99,6 @@ config SND_BF5XX_SOC_AD1836
help
Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-config SND_BF5XX_SOC_AD193X
- tristate "SoC AD193X Audio support for Blackfin"
- depends on SND_BF5XX_TDM
- select SND_BF5XX_SOC_TDM
- select SND_SOC_AD193X
- help
- Say Y if you want to add support for AD193X codec on Blackfin.
- This driver supports AD1936, AD1937, AD1938 and AD1939.
-
config SND_BF5XX_AC97
tristate "SoC AC97 Audio for the ADI BF5xx chip"
depends on BLACKFIN
diff --git a/sound/soc/blackfin/bf5xx-ad193x.c b/sound/soc/blackfin/bf5xx-ad193x.c
index ce773b3..603ad1f 100644
--- a/sound/soc/blackfin/bf5xx-ad193x.c
+++ b/sound/soc/blackfin/bf5xx-ad193x.c
@@ -39,29 +39,16 @@
#include "../codecs/ad193x.h"
-#include "bf5xx-tdm.h"
-
static struct snd_soc_card bf5xx_ad193x;
-static int bf5xx_ad193x_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
+static int bf5xx_ad193x_link_init(struct snd_soc_pcm_runtime *rtd)
{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
- unsigned int clk = 0;
- unsigned int channel_map[] = {0, 1, 2, 3, 4, 5, 6, 7};
- int ret = 0;
-
- switch (params_rate(params)) {
- case 48000:
- clk = 24576000;
- break;
- }
+ int ret;
/* set the codec system clock for DAC and ADC */
- ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
- SND_SOC_CLOCK_IN);
+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, 24576000, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
@@ -70,9 +57,7 @@ static int bf5xx_ad193x_hw_params(struct snd_pcm_substream *substream,
if (ret < 0)
return ret;
- /* set cpu DAI channel mapping */
- ret = snd_soc_dai_set_channel_map(cpu_dai, ARRAY_SIZE(channel_map),
- channel_map, ARRAY_SIZE(channel_map), channel_map);
+ ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0xFF, 0xFF, 8, 32);
if (ret < 0)
return ret;
@@ -82,30 +67,26 @@ static int bf5xx_ad193x_hw_params(struct snd_pcm_substream *substream,
#define BF5XX_AD193X_DAIFMT (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_IF | \
SND_SOC_DAIFMT_CBM_CFM)
-static struct snd_soc_ops bf5xx_ad193x_ops = {
- .hw_params = bf5xx_ad193x_hw_params,
-};
-
static struct snd_soc_dai_link bf5xx_ad193x_dai[] = {
{
.name = "ad193x",
.stream_name = "AD193X",
- .cpu_dai_name = "bfin-tdm.0",
+ .cpu_dai_name = "bfin-i2s.0",
.codec_dai_name ="ad193x-hifi",
- .platform_name = "bfin-tdm-pcm-audio",
+ .platform_name = "bfin-i2s-pcm-audio",
.codec_name = "spi0.5",
- .ops = &bf5xx_ad193x_ops,
.dai_fmt = BF5XX_AD193X_DAIFMT,
+ .init = bf5xx_ad193x_link_init,
},
{
.name = "ad193x",
.stream_name = "AD193X",
- .cpu_dai_name = "bfin-tdm.1",
+ .cpu_dai_name = "bfin-i2s.1",
.codec_dai_name ="ad193x-hifi",
- .platform_name = "bfin-tdm-pcm-audio",
+ .platform_name = "bfin-i2s-pcm-audio",
.codec_name = "spi0.5",
- .ops = &bf5xx_ad193x_ops,
.dai_fmt = BF5XX_AD193X_DAIFMT,
+ .init = bf5xx_ad193x_link_init,
},
};
--
1.8.0
More information about the Alsa-devel
mailing list