[alsa-devel] [PATCH v2] ASoC: Add ssm2518 support

Lars-Peter Clausen lars at metafoo.de
Thu May 23 20:14:50 CEST 2013


This patch adds a ASoC CODEC driver for the SSM2516. The SSM2516 is a stereo
Class-D audio amplifier with an I2S interface for audio in and a built-in
dynamic range control processor.

Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>

---
Changes since v1:
	* Power off the codec in the I2C probe function
	* Allow a sysclk of 0 which won't but any constraints on the supported
	  sample rates. This can be used by systems which are able to change the
	  sysclk on demand.
	* Remove {} around multi-line single statements

---
 .../devicetree/bindings/sound/ssm2518.txt          |  20 +
 include/linux/platform_data/ssm2518.h              |  22 +
 sound/soc/codecs/Kconfig                           |   4 +
 sound/soc/codecs/Makefile                          |   2 +
 sound/soc/codecs/ssm2518.c                         | 856 +++++++++++++++++++++
 sound/soc/codecs/ssm2518.h                         |  20 +
 6 files changed, 924 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/ssm2518.txt
 create mode 100644 include/linux/platform_data/ssm2518.h
 create mode 100644 sound/soc/codecs/ssm2518.c
 create mode 100644 sound/soc/codecs/ssm2518.h

diff --git a/Documentation/devicetree/bindings/sound/ssm2518.txt b/Documentation/devicetree/bindings/sound/ssm2518.txt
new file mode 100644
index 0000000..59381a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ssm2518.txt
@@ -0,0 +1,20 @@
+SSM2518 audio amplifier
+
+This device supports I2C only.
+
+Required properties:
+  - compatible : Must be "adi,ssm2518"
+  - reg : the I2C address of the device. This will either be 0x34 (ADDR pin low)
+	or 0x35 (ADDR pin high)
+
+Optional properties:
+  - gpios : GPIO connected to the nSD pin. If the property is not present it is
+	        assumed that the nSD pin is hardwired to always on.
+
+Example:
+
+	ssm2518: ssm2518 at 34 {
+		compatible = "adi,ssm2518";
+		reg = <0x34>;
+		gpios = <&gpio 5 0>;
+	};
diff --git a/include/linux/platform_data/ssm2518.h b/include/linux/platform_data/ssm2518.h
new file mode 100644
index 0000000..9a8e3ea
--- /dev/null
+++ b/include/linux/platform_data/ssm2518.h
@@ -0,0 +1,22 @@
+/*
+ * SSM2518 amplifier audio driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars at metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__
+#define __LINUX_PLATFORM_DATA_SSM2518_H__
+
+/**
+ * struct ssm2518_platform_data - Platform data for the ssm2518 driver
+ * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is
+ *            hardwired.
+ */
+struct ssm2518_platform_data {
+	int enable_gpio;
+};
+
+#endif
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 2f45f00..d76609a 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -60,6 +60,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_SI476X if MFD_SI476X_CORE
 	select SND_SOC_SN95031 if INTEL_SCU_IPC
 	select SND_SOC_SPDIF
+	select SND_SOC_SSM2518 if I2C
 	select SND_SOC_SSM2602 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_STA32X if I2C
 	select SND_SOC_STA529 if I2C
@@ -313,6 +314,9 @@ config SND_SOC_SN95031
 config SND_SOC_SPDIF
 	tristate
 
+config SND_SOC_SSM2518
+	tristate
+
 config SND_SOC_SSM2602
 	tristate
 
diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
index dae0aa6..7204c24 100644
--- a/sound/soc/codecs/Makefile
+++ b/sound/soc/codecs/Makefile
@@ -52,6 +52,7 @@ snd-soc-si476x-objs := si476x.o
 snd-soc-sn95031-objs := sn95031.o
 snd-soc-spdif-tx-objs := spdif_transmitter.o
 snd-soc-spdif-rx-objs := spdif_receiver.o
+snd-soc-ssm2518-objs := ssm2518.o
 snd-soc-ssm2602-objs := ssm2602.o
 snd-soc-sta32x-objs := sta32x.o
 snd-soc-sta529-objs := sta529.o
@@ -176,6 +177,7 @@ obj-$(CONFIG_SND_SOC_SIGMADSP)	+= snd-soc-sigmadsp.o
 obj-$(CONFIG_SND_SOC_SI476X)	+= snd-soc-si476x.o
 obj-$(CONFIG_SND_SOC_SN95031)	+=snd-soc-sn95031.o
 obj-$(CONFIG_SND_SOC_SPDIF)	+= snd-soc-spdif-rx.o snd-soc-spdif-tx.o
+obj-$(CONFIG_SND_SOC_SSM2518)	+= snd-soc-ssm2518.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
 obj-$(CONFIG_SND_SOC_STA32X)   += snd-soc-sta32x.o
 obj-$(CONFIG_SND_SOC_STA529)   += snd-soc-sta529.o
diff --git a/sound/soc/codecs/ssm2518.c b/sound/soc/codecs/ssm2518.c
new file mode 100644
index 0000000..3139a1b
--- /dev/null
+++ b/sound/soc/codecs/ssm2518.c
@@ -0,0 +1,856 @@
+/*
+ * SSM2518 amplifier audio driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars at metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_data/ssm2518.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+
+#include "ssm2518.h"
+
+#define SSM2518_REG_POWER1		0x00
+#define SSM2518_REG_CLOCK		0x01
+#define SSM2518_REG_SAI_CTRL1		0x02
+#define SSM2518_REG_SAI_CTRL2		0x03
+#define SSM2518_REG_CHAN_MAP		0x04
+#define SSM2518_REG_LEFT_VOL		0x05
+#define SSM2518_REG_RIGHT_VOL		0x06
+#define SSM2518_REG_MUTE_CTRL		0x07
+#define SSM2518_REG_FAULT_CTRL		0x08
+#define SSM2518_REG_POWER2		0x09
+#define SSM2518_REG_DRC_1		0x0a
+#define SSM2518_REG_DRC_2		0x0b
+#define SSM2518_REG_DRC_3		0x0c
+#define SSM2518_REG_DRC_4		0x0d
+#define SSM2518_REG_DRC_5		0x0e
+#define SSM2518_REG_DRC_6		0x0f
+#define SSM2518_REG_DRC_7		0x10
+#define SSM2518_REG_DRC_8		0x11
+#define SSM2518_REG_DRC_9		0x12
+
+#define SSM2518_POWER1_RESET			BIT(7)
+#define SSM2518_POWER1_NO_BCLK			BIT(5)
+#define SSM2518_POWER1_MCS_MASK			(0xf << 1)
+#define SSM2518_POWER1_MCS_64FS			(0x0 << 1)
+#define SSM2518_POWER1_MCS_128FS		(0x1 << 1)
+#define SSM2518_POWER1_MCS_256FS		(0x2 << 1)
+#define SSM2518_POWER1_MCS_384FS		(0x3 << 1)
+#define SSM2518_POWER1_MCS_512FS		(0x4 << 1)
+#define SSM2518_POWER1_MCS_768FS		(0x5 << 1)
+#define SSM2518_POWER1_MCS_100FS		(0x6 << 1)
+#define SSM2518_POWER1_MCS_200FS		(0x7 << 1)
+#define SSM2518_POWER1_MCS_400FS		(0x8 << 1)
+#define SSM2518_POWER1_SPWDN			BIT(0)
+
+#define SSM2518_CLOCK_ASR			BIT(0)
+
+#define SSM2518_SAI_CTRL1_FMT_MASK		(0x3 << 5)
+#define SSM2518_SAI_CTRL1_FMT_I2S		(0x0 << 5)
+#define SSM2518_SAI_CTRL1_FMT_LJ		(0x1 << 5)
+#define SSM2518_SAI_CTRL1_FMT_RJ_24BIT		(0x2 << 5)
+#define SSM2518_SAI_CTRL1_FMT_RJ_16BIT		(0x3 << 5)
+
+#define SSM2518_SAI_CTRL1_SAI_MASK		(0x7 << 2)
+#define SSM2518_SAI_CTRL1_SAI_I2S		(0x0 << 2)
+#define SSM2518_SAI_CTRL1_SAI_TDM_2		(0x1 << 2)
+#define SSM2518_SAI_CTRL1_SAI_TDM_4		(0x2 << 2)
+#define SSM2518_SAI_CTRL1_SAI_TDM_8		(0x3 << 2)
+#define SSM2518_SAI_CTRL1_SAI_TDM_16		(0x4 << 2)
+#define SSM2518_SAI_CTRL1_SAI_MONO		(0x5 << 2)
+
+#define SSM2518_SAI_CTRL1_FS_MASK		(0x3)
+#define SSM2518_SAI_CTRL1_FS_8000_12000		(0x0)
+#define SSM2518_SAI_CTRL1_FS_16000_24000	(0x1)
+#define SSM2518_SAI_CTRL1_FS_32000_48000	(0x2)
+#define SSM2518_SAI_CTRL1_FS_64000_96000	(0x3)
+
+#define SSM2518_SAI_CTRL2_BCLK_INTERAL		BIT(7)
+#define SSM2518_SAI_CTRL2_LRCLK_PULSE		BIT(6)
+#define SSM2518_SAI_CTRL2_LRCLK_INVERT		BIT(5)
+#define SSM2518_SAI_CTRL2_MSB			BIT(4)
+#define SSM2518_SAI_CTRL2_SLOT_WIDTH_MASK	(0x3 << 2)
+#define SSM2518_SAI_CTRL2_SLOT_WIDTH_32		(0x0 << 2)
+#define SSM2518_SAI_CTRL2_SLOT_WIDTH_24		(0x1 << 2)
+#define SSM2518_SAI_CTRL2_SLOT_WIDTH_16		(0x2 << 2)
+#define SSM2518_SAI_CTRL2_BCLK_INVERT		BIT(1)
+
+#define SSM2518_CHAN_MAP_RIGHT_SLOT_OFFSET	4
+#define SSM2518_CHAN_MAP_RIGHT_SLOT_MASK	0xf0
+#define SSM2518_CHAN_MAP_LEFT_SLOT_OFFSET	0
+#define SSM2518_CHAN_MAP_LEFT_SLOT_MASK		0x0f
+
+#define SSM2518_MUTE_CTRL_ANA_GAIN		BIT(5)
+#define SSM2518_MUTE_CTRL_MUTE_MASTER		BIT(0)
+
+#define SSM2518_POWER2_APWDN			BIT(0)
+
+#define SSM2518_DAC_MUTE			BIT(6)
+#define SSM2518_DAC_FS_MASK			0x07
+#define SSM2518_DAC_FS_8000			0x00
+#define SSM2518_DAC_FS_16000			0x01
+#define SSM2518_DAC_FS_32000			0x02
+#define SSM2518_DAC_FS_64000			0x03
+#define SSM2518_DAC_FS_128000			0x04
+
+struct ssm2518 {
+	struct regmap *regmap;
+	bool right_j;
+
+	unsigned int sysclk;
+	const struct snd_pcm_hw_constraint_list *constraints;
+
+	int enable_gpio;
+};
+
+static const struct reg_default ssm2518_reg_defaults[] = {
+	{ 0x00, 0x05 },
+	{ 0x01, 0x00 },
+	{ 0x02, 0x02 },
+	{ 0x03, 0x00 },
+	{ 0x04, 0x10 },
+	{ 0x05, 0x40 },
+	{ 0x06, 0x40 },
+	{ 0x07, 0x81 },
+	{ 0x08, 0x0c },
+	{ 0x09, 0x99 },
+	{ 0x0a, 0x7c },
+	{ 0x0b, 0x5b },
+	{ 0x0c, 0x57 },
+	{ 0x0d, 0x89 },
+	{ 0x0e, 0x8c },
+	{ 0x0f, 0x77 },
+	{ 0x10, 0x26 },
+	{ 0x11, 0x1c },
+	{ 0x12, 0x97 },
+};
+
+static const DECLARE_TLV_DB_MINMAX_MUTE(ssm2518_vol_tlv, -7125, 2400);
+static const DECLARE_TLV_DB_SCALE(ssm2518_compressor_tlv, -3400, 200, 0);
+static const DECLARE_TLV_DB_SCALE(ssm2518_expander_tlv, -8100, 300, 0);
+static const DECLARE_TLV_DB_SCALE(ssm2518_noise_gate_tlv, -9600, 300, 0);
+static const DECLARE_TLV_DB_SCALE(ssm2518_post_drc_tlv, -2400, 300, 0);
+
+static const DECLARE_TLV_DB_RANGE(ssm2518_limiter_tlv,
+	0, 7, TLV_DB_SCALE_ITEM(-2200, 200, 0),
+	7, 15, TLV_DB_SCALE_ITEM(-800, 100, 0),
+);
+
+static const char * const ssm2518_drc_peak_detector_attack_time_text[] = {
+	"0 ms", "0.1 ms", "0.19 ms", "0.37 ms", "0.75 ms", "1.5 ms", "3 ms",
+	"6 ms", "12 ms", "24 ms", "48 ms", "96 ms", "192 ms", "384 ms",
+	"768 ms", "1536 ms",
+};
+
+static const char * const ssm2518_drc_peak_detector_release_time_text[] = {
+	"0 ms", "1.5 ms", "3 ms", "6 ms", "12 ms", "24 ms", "48 ms", "96 ms",
+	"192 ms", "384 ms", "768 ms", "1536 ms", "3072 ms", "6144 ms",
+	"12288 ms", "24576 ms"
+};
+
+static const char * const ssm2518_drc_hold_time_text[] = {
+	"0 ms", "0.67 ms", "1.33 ms", "2.67 ms", "5.33 ms", "10.66 ms",
+	"21.32 ms", "42.64 ms", "85.28 ms", "170.56 ms", "341.12 ms",
+	"682.24 ms", "1364 ms",
+};
+
+static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_peak_detector_attack_time_enum,
+	SSM2518_REG_DRC_2, 4, ssm2518_drc_peak_detector_attack_time_text);
+static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_peak_detector_release_time_enum,
+	SSM2518_REG_DRC_2, 0, ssm2518_drc_peak_detector_release_time_text);
+static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_attack_time_enum,
+	SSM2518_REG_DRC_6, 4, ssm2518_drc_peak_detector_attack_time_text);
+static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_decay_time_enum,
+	SSM2518_REG_DRC_6, 0, ssm2518_drc_peak_detector_release_time_text);
+static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_hold_time_enum,
+	SSM2518_REG_DRC_7, 4, ssm2518_drc_hold_time_text);
+static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_noise_gate_hold_time_enum,
+	SSM2518_REG_DRC_7, 0, ssm2518_drc_hold_time_text);
+static const SOC_ENUM_SINGLE_DECL(ssm2518_drc_rms_averaging_time_enum,
+	SSM2518_REG_DRC_9, 0, ssm2518_drc_peak_detector_release_time_text);
+
+static const struct snd_kcontrol_new ssm2518_snd_controls[] = {
+	SOC_SINGLE("Playback De-emphasis Switch", SSM2518_REG_MUTE_CTRL,
+			4, 1, 0),
+	SOC_DOUBLE_R_TLV("Master Playback Volume", SSM2518_REG_LEFT_VOL,
+			SSM2518_REG_RIGHT_VOL, 0, 0xff, 1, ssm2518_vol_tlv),
+	SOC_DOUBLE("Master Playback Switch", SSM2518_REG_MUTE_CTRL, 2, 1, 1, 1),
+
+	SOC_SINGLE("Amp Low Power Mode Switch", SSM2518_REG_POWER2, 4, 1, 0),
+	SOC_SINGLE("DAC Low Power Mode Switch", SSM2518_REG_POWER2, 3, 1, 0),
+
+	SOC_SINGLE("DRC Limiter Switch", SSM2518_REG_DRC_1, 5, 1, 0),
+	SOC_SINGLE("DRC Compressor Switch", SSM2518_REG_DRC_1, 4, 1, 0),
+	SOC_SINGLE("DRC Expander Switch", SSM2518_REG_DRC_1, 3, 1, 0),
+	SOC_SINGLE("DRC Noise Gate Switch", SSM2518_REG_DRC_1, 2, 1, 0),
+	SOC_DOUBLE("DRC Switch", SSM2518_REG_DRC_1, 0, 1, 1, 0),
+
+	SOC_SINGLE_TLV("DRC Limiter Threshold Volume",
+			SSM2518_REG_DRC_3, 4, 15, 1, ssm2518_limiter_tlv),
+	SOC_SINGLE_TLV("DRC Compressor Lower Threshold Volume",
+			SSM2518_REG_DRC_3, 0, 15, 1, ssm2518_compressor_tlv),
+	SOC_SINGLE_TLV("DRC Expander Upper Threshold Volume", SSM2518_REG_DRC_4,
+			4, 15, 1, ssm2518_expander_tlv),
+	SOC_SINGLE_TLV("DRC Noise Gate Threshold Volume",
+			SSM2518_REG_DRC_4, 0, 15, 1, ssm2518_noise_gate_tlv),
+	SOC_SINGLE_TLV("DRC Upper Output Threshold Volume",
+			SSM2518_REG_DRC_5, 4, 15, 1, ssm2518_limiter_tlv),
+	SOC_SINGLE_TLV("DRC Lower Output Threshold Volume",
+			SSM2518_REG_DRC_5, 0, 15, 1, ssm2518_noise_gate_tlv),
+	SOC_SINGLE_TLV("DRC Post Volume", SSM2518_REG_DRC_8,
+			2, 15, 1, ssm2518_post_drc_tlv),
+
+	SOC_ENUM("DRC Peak Detector Attack Time",
+		ssm2518_drc_peak_detector_attack_time_enum),
+	SOC_ENUM("DRC Peak Detector Release Time",
+		ssm2518_drc_peak_detector_release_time_enum),
+	SOC_ENUM("DRC Attack Time", ssm2518_drc_attack_time_enum),
+	SOC_ENUM("DRC Decay Time", ssm2518_drc_decay_time_enum),
+	SOC_ENUM("DRC Hold Time", ssm2518_drc_hold_time_enum),
+	SOC_ENUM("DRC Noise Gate Hold Time",
+		ssm2518_drc_noise_gate_hold_time_enum),
+	SOC_ENUM("DRC RMS Averaging Time", ssm2518_drc_rms_averaging_time_enum),
+};
+
+static const struct snd_soc_dapm_widget ssm2518_dapm_widgets[] = {
+	SND_SOC_DAPM_DAC("DACL", "HiFi Playback", SSM2518_REG_POWER2, 1, 1),
+	SND_SOC_DAPM_DAC("DACR", "HiFi Playback", SSM2518_REG_POWER2, 2, 1),
+
+	SND_SOC_DAPM_OUTPUT("OUTL"),
+	SND_SOC_DAPM_OUTPUT("OUTR"),
+};
+
+static const struct snd_soc_dapm_route ssm2518_routes[] = {
+	{ "OUTL", NULL, "DACL" },
+	{ "OUTR", NULL, "DACR" },
+};
+
+struct ssm2518_mcs_lut {
+	unsigned int rate;
+	const unsigned int *sysclks;
+};
+
+static const unsigned int ssm2518_sysclks_2048000[] = {
+	2048000, 4096000, 8192000, 12288000, 16384000, 24576000,
+	3200000, 6400000, 12800000, 0
+};
+
+static const unsigned int ssm2518_sysclks_2822000[] = {
+	2822000, 5644800, 11289600, 16934400, 22579200, 33868800,
+	4410000, 8820000, 17640000, 0
+};
+
+static const unsigned int ssm2518_sysclks_3072000[] = {
+	3072000, 6144000, 12288000, 16384000, 24576000, 38864000,
+	4800000, 9600000, 19200000, 0
+};
+
+static const struct ssm2518_mcs_lut ssm2518_mcs_lut[] = {
+	{ 8000,  ssm2518_sysclks_2048000, },
+	{ 11025, ssm2518_sysclks_2822000, },
+	{ 12000, ssm2518_sysclks_3072000, },
+	{ 16000, ssm2518_sysclks_2048000, },
+	{ 24000, ssm2518_sysclks_3072000, },
+	{ 22050, ssm2518_sysclks_2822000, },
+	{ 32000, ssm2518_sysclks_2048000, },
+	{ 44100, ssm2518_sysclks_2822000, },
+	{ 48000, ssm2518_sysclks_3072000, },
+	{ 96000, ssm2518_sysclks_3072000, },
+};
+
+static const unsigned int ssm2518_rates_2048000[] = {
+	8000, 16000, 32000,
+};
+
+static const struct snd_pcm_hw_constraint_list ssm2518_constraints_2048000 = {
+	.list = ssm2518_rates_2048000,
+	.count = ARRAY_SIZE(ssm2518_rates_2048000),
+};
+
+static const unsigned int ssm2518_rates_2822000[] = {
+	11025, 22050, 44100,
+};
+
+static const struct snd_pcm_hw_constraint_list ssm2518_constraints_2822000 = {
+	.list = ssm2518_rates_2822000,
+	.count = ARRAY_SIZE(ssm2518_rates_2822000),
+};
+
+static const unsigned int ssm2518_rates_3072000[] = {
+	12000, 24000, 48000, 96000,
+};
+
+static const struct snd_pcm_hw_constraint_list ssm2518_constraints_3072000 = {
+	.list = ssm2518_rates_3072000,
+	.count = ARRAY_SIZE(ssm2518_rates_3072000),
+};
+
+static const unsigned int ssm2518_rates_12288000[] = {
+	8000, 12000, 16000, 24000, 32000, 48000, 96000,
+};
+
+static const struct snd_pcm_hw_constraint_list ssm2518_constraints_12288000 = {
+	.list = ssm2518_rates_12288000,
+	.count = ARRAY_SIZE(ssm2518_rates_12288000),
+};
+
+static unsigned int ssm2518_lookup_mcs(struct ssm2518 *ssm2518,
+	unsigned int rate)
+{
+	const unsigned int *sysclks = NULL;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ssm2518_mcs_lut); i++) {
+		if (ssm2518_mcs_lut[i].rate == rate) {
+			sysclks = ssm2518_mcs_lut[i].sysclks;
+			break;
+		}
+	}
+
+	if (!sysclks)
+		return -EINVAL;
+
+	for (i = 0; sysclks[i]; i++) {
+		if (sysclks[i] == ssm2518->sysclk)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int ssm2518_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
+{
+	struct snd_soc_codec *codec = dai->codec;
+	struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec);
+	unsigned int rate = params_rate(params);
+	unsigned int ctrl1, ctrl1_mask;
+	int mcs;
+	int ret;
+
+	mcs = ssm2518_lookup_mcs(ssm2518, rate);
+	if (mcs < 0)
+		return mcs;
+
+	ctrl1_mask = SSM2518_SAI_CTRL1_FS_MASK;
+
+	if (rate >= 8000 && rate <= 12000)
+		ctrl1 = SSM2518_SAI_CTRL1_FS_8000_12000;
+	else if (rate >= 16000 && rate <= 24000)
+		ctrl1 = SSM2518_SAI_CTRL1_FS_16000_24000;
+	else if (rate >= 32000 && rate <= 48000)
+		ctrl1 = SSM2518_SAI_CTRL1_FS_32000_48000;
+	else if (rate >= 64000 && rate <= 96000)
+		ctrl1 = SSM2518_SAI_CTRL1_FS_64000_96000;
+	else
+		return -EINVAL;
+
+	if (ssm2518->right_j) {
+		switch (params_format(params)) {
+		case SNDRV_PCM_FORMAT_S16_LE:
+			ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_16BIT;
+			break;
+		case SNDRV_PCM_FORMAT_S24_LE:
+			ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_24BIT;
+			break;
+		default:
+			return -EINVAL;
+		}
+		ctrl1_mask |= SSM2518_SAI_CTRL1_FMT_MASK;
+	}
+
+	/* Disable auto samplerate detection */
+	ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_CLOCK,
+				SSM2518_CLOCK_ASR, SSM2518_CLOCK_ASR);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL1,
+				ctrl1_mask, ctrl1);
+	if (ret < 0)
+		return ret;
+
+	return regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1,
+				SSM2518_POWER1_MCS_MASK, mcs << 1);
+}
+
+static int ssm2518_mute(struct snd_soc_dai *dai, int mute)
+{
+	struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec);
+	unsigned int val;
+
+	if (mute)
+		val = SSM2518_MUTE_CTRL_MUTE_MASTER;
+	else
+		val = 0;
+
+	return regmap_update_bits(ssm2518->regmap, SSM2518_REG_MUTE_CTRL,
+			SSM2518_MUTE_CTRL_MUTE_MASTER, val);
+}
+
+static int ssm2518_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
+{
+	struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec);
+	unsigned int ctrl1 = 0, ctrl2 = 0;
+	bool invert_fclk;
+	int ret;
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		invert_fclk = false;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		ctrl2 |= SSM2518_SAI_CTRL2_BCLK_INVERT;
+		invert_fclk = false;
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		invert_fclk = true;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		ctrl2 |= SSM2518_SAI_CTRL2_BCLK_INVERT;
+		invert_fclk = true;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ssm2518->right_j = false;
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_I2S;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_LJ;
+		invert_fclk = !invert_fclk;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_RJ_24BIT;
+		ssm2518->right_j = true;
+		invert_fclk = !invert_fclk;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_PULSE;
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_I2S;
+		invert_fclk = false;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_PULSE;
+		ctrl1 |= SSM2518_SAI_CTRL1_FMT_LJ;
+		invert_fclk = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (invert_fclk)
+		ctrl2 |= SSM2518_SAI_CTRL2_LRCLK_INVERT;
+
+	ret = regmap_write(ssm2518->regmap, SSM2518_REG_SAI_CTRL1, ctrl1);
+	if (ret)
+		return ret;
+
+	return regmap_write(ssm2518->regmap, SSM2518_REG_SAI_CTRL2, ctrl2);
+}
+
+static int ssm2518_set_power(struct ssm2518 *ssm2518, bool enable)
+{
+	int ret = 0;
+
+	if (!enable) {
+		ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1,
+			SSM2518_POWER1_SPWDN, SSM2518_POWER1_SPWDN);
+		regcache_mark_dirty(ssm2518->regmap);
+	}
+
+	if (gpio_is_valid(ssm2518->enable_gpio))
+		gpio_set_value(ssm2518->enable_gpio, enable);
+
+	regcache_cache_only(ssm2518->regmap, !enable);
+
+	if (enable) {
+		ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1,
+			SSM2518_POWER1_SPWDN | SSM2518_POWER1_RESET, 0x00);
+		regcache_sync(ssm2518->regmap);
+	}
+
+	return ret;
+}
+
+static int ssm2518_set_bias_level(struct snd_soc_codec *codec,
+	enum snd_soc_bias_level level)
+{
+	struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec);
+	int ret = 0;
+
+	switch (level) {
+	case SND_SOC_BIAS_ON:
+		break;
+	case SND_SOC_BIAS_PREPARE:
+		break;
+	case SND_SOC_BIAS_STANDBY:
+		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
+			ret = ssm2518_set_power(ssm2518, true);
+		break;
+	case SND_SOC_BIAS_OFF:
+		ret = ssm2518_set_power(ssm2518, false);
+		break;
+	}
+
+	if (ret)
+		return ret;
+
+	codec->dapm.bias_level = level;
+
+	return 0;
+}
+
+static int ssm2518_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
+	unsigned int rx_mask, int slots, int width)
+{
+	struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec);
+	unsigned int ctrl1, ctrl2;
+	int left_slot, right_slot;
+	int ret;
+
+	if (slots == 0)
+		return regmap_update_bits(ssm2518->regmap,
+			SSM2518_REG_SAI_CTRL1, SSM2518_SAI_CTRL1_SAI_MASK,
+			SSM2518_SAI_CTRL1_SAI_I2S);
+
+	if (tx_mask == 0 || tx_mask != 0)
+		return -EINVAL;
+
+	if (slots == 1) {
+		if (tx_mask != 1)
+			return -EINVAL;
+		left_slot = 0;
+		right_slot = 0;
+	} else {
+		/* We assume the left channel < right channel */
+		left_slot = ffs(tx_mask);
+		tx_mask &= ~(1 << tx_mask);
+		if (tx_mask == 0) {
+			right_slot = left_slot;
+		} else {
+			right_slot = ffs(tx_mask);
+			tx_mask &= ~(1 << tx_mask);
+		}
+	}
+
+	if (tx_mask != 0 || left_slot >= slots || right_slot >= slots)
+		return -EINVAL;
+
+	switch (width) {
+	case 16:
+		ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_16;
+		break;
+	case 24:
+		ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_24;
+		break;
+	case 32:
+		ctrl2 = SSM2518_SAI_CTRL2_SLOT_WIDTH_32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (slots) {
+	case 1:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_MONO;
+		break;
+	case 2:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_2;
+		break;
+	case 4:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_4;
+		break;
+	case 8:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_8;
+		break;
+	case 16:
+		ctrl1 = SSM2518_SAI_CTRL1_SAI_TDM_16;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_write(ssm2518->regmap, SSM2518_REG_CHAN_MAP,
+		(left_slot << SSM2518_CHAN_MAP_LEFT_SLOT_OFFSET) |
+		(right_slot << SSM2518_CHAN_MAP_RIGHT_SLOT_OFFSET));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL1,
+		SSM2518_SAI_CTRL1_SAI_MASK, ctrl1);
+	if (ret)
+		return ret;
+
+	return regmap_update_bits(ssm2518->regmap, SSM2518_REG_SAI_CTRL2,
+		SSM2518_SAI_CTRL2_SLOT_WIDTH_MASK, ctrl2);
+}
+
+static int ssm2518_startup(struct snd_pcm_substream *substream,
+	struct snd_soc_dai *dai)
+{
+	struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(dai->codec);
+
+	if (ssm2518->constraints)
+		snd_pcm_hw_constraint_list(substream->runtime, 0,
+				SNDRV_PCM_HW_PARAM_RATE, ssm2518->constraints);
+
+	return 0;
+}
+
+#define SSM2518_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \
+			SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32)
+
+static const struct snd_soc_dai_ops ssm2518_dai_ops = {
+	.startup = ssm2518_startup,
+	.hw_params	= ssm2518_hw_params,
+	.digital_mute	= ssm2518_mute,
+	.set_fmt	= ssm2518_set_dai_fmt,
+	.set_tdm_slot	= ssm2518_set_tdm_slot,
+};
+
+static struct snd_soc_dai_driver ssm2518_dai = {
+	.name = "ssm2518-hifi",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 2,
+		.rates = SNDRV_PCM_RATE_8000_96000,
+		.formats = SSM2518_FORMATS,
+	},
+	.ops = &ssm2518_dai_ops,
+};
+
+static int ssm2518_probe(struct snd_soc_codec *codec)
+{
+	struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec);
+	int ret;
+
+	codec->control_data = ssm2518->regmap;
+	ret = snd_soc_codec_set_cache_io(codec, 0, 0, SND_SOC_REGMAP);
+	if (ret < 0) {
+		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+		return ret;
+	}
+
+	return ssm2518_set_bias_level(codec, SND_SOC_BIAS_OFF);
+}
+
+static int ssm2518_remove(struct snd_soc_codec *codec)
+{
+	ssm2518_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
+
+static int ssm2518_set_sysclk(struct snd_soc_codec *codec, int clk_id,
+	int source, unsigned int freq, int dir)
+{
+	struct ssm2518 *ssm2518 = snd_soc_codec_get_drvdata(codec);
+	unsigned int val;
+
+	if (clk_id != SSM2518_SYSCLK)
+		return -EINVAL;
+
+	switch (source) {
+	case SSM2518_SYSCLK_SRC_MCLK:
+		val = 0;
+		break;
+	case SSM2518_SYSCLK_SRC_BCLK:
+		/* In this case the bitclock is used as the system clock, and
+		 * the bitclock signal needs to be connected to the MCLK pin and
+		 * the BCLK pin is left unconnected */
+		val = SSM2518_POWER1_NO_BCLK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (freq) {
+	case 0:
+		ssm2518->constraints = NULL;
+		break;
+	case 2048000:
+	case 4096000:
+	case 8192000:
+	case 3200000:
+	case 6400000:
+	case 12800000:
+		ssm2518->constraints = &ssm2518_constraints_2048000;
+		break;
+	case 2822000:
+	case 5644800:
+	case 11289600:
+	case 16934400:
+	case 22579200:
+	case 33868800:
+	case 4410000:
+	case 8820000:
+	case 17640000:
+		ssm2518->constraints = &ssm2518_constraints_2822000;
+		break;
+	case 3072000:
+	case 6144000:
+	case 38864000:
+	case 4800000:
+	case 9600000:
+	case 19200000:
+		ssm2518->constraints = &ssm2518_constraints_3072000;
+		break;
+	case 12288000:
+	case 16384000:
+	case 24576000:
+		ssm2518->constraints = &ssm2518_constraints_12288000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ssm2518->sysclk = freq;
+
+	return regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER1,
+			SSM2518_POWER1_NO_BCLK, val);
+}
+
+static struct snd_soc_codec_driver ssm2518_codec_driver = {
+	.probe = ssm2518_probe,
+	.remove = ssm2518_remove,
+	.set_bias_level = ssm2518_set_bias_level,
+	.set_sysclk = ssm2518_set_sysclk,
+	.idle_bias_off = true,
+
+	.controls = ssm2518_snd_controls,
+	.num_controls = ARRAY_SIZE(ssm2518_snd_controls),
+	.dapm_widgets = ssm2518_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(ssm2518_dapm_widgets),
+	.dapm_routes = ssm2518_routes,
+	.num_dapm_routes = ARRAY_SIZE(ssm2518_routes),
+};
+
+static bool ssm2518_register_volatile(struct device *dev, unsigned int reg)
+{
+	return false;
+}
+
+static const struct regmap_config ssm2518_regmap_config = {
+	.val_bits = 8,
+	.reg_bits = 8,
+
+	.max_register = SSM2518_REG_DRC_9,
+	.volatile_reg = ssm2518_register_volatile,
+
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults = ssm2518_reg_defaults,
+	.num_reg_defaults = ARRAY_SIZE(ssm2518_reg_defaults),
+};
+
+static int ssm2518_i2c_probe(struct i2c_client *i2c,
+	const struct i2c_device_id *id)
+{
+	struct ssm2518_platform_data *pdata = i2c->dev.platform_data;
+	struct ssm2518 *ssm2518;
+	int ret;
+
+	ssm2518 = devm_kzalloc(&i2c->dev, sizeof(*ssm2518), GFP_KERNEL);
+	if (ssm2518 == NULL)
+		return -ENOMEM;
+
+	if (pdata) {
+		ssm2518->enable_gpio = pdata->enable_gpio;
+	} else if (i2c->dev.of_node) {
+		ssm2518->enable_gpio = of_get_gpio(i2c->dev.of_node, 0);
+		if (ssm2518->enable_gpio < 0 && ssm2518->enable_gpio != -ENOENT)
+			return ssm2518->enable_gpio;
+	} else {
+		ssm2518->enable_gpio = -1;
+	}
+
+	if (gpio_is_valid(ssm2518->enable_gpio)) {
+		ret = devm_gpio_request_one(&i2c->dev, ssm2518->enable_gpio,
+				GPIOF_OUT_INIT_HIGH, "SSM2518 nSD");
+		if (ret)
+			return ret;
+	}
+
+	i2c_set_clientdata(i2c, ssm2518);
+
+	ssm2518->regmap = devm_regmap_init_i2c(i2c, &ssm2518_regmap_config);
+	if (IS_ERR(ssm2518->regmap))
+		return PTR_ERR(ssm2518->regmap);
+
+	/*
+	 * The reset bit is obviously volatile, but we need to be able to cache
+	 * the other bits in the register, so we can't just mark the whole
+	 * register as volatile. Since this is the only place where we'll ever
+	 * touch the reset bit just bypass the cache for this operation.
+	 */
+	regcache_cache_bypass(ssm2518->regmap, true);
+	ret = regmap_write(ssm2518->regmap, SSM2518_REG_POWER1,
+			SSM2518_POWER1_RESET);
+	regcache_cache_bypass(ssm2518->regmap, false);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(ssm2518->regmap, SSM2518_REG_POWER2,
+				SSM2518_POWER2_APWDN, 0x00);
+	if (ret)
+		return ret;
+
+	ret = ssm2518_set_power(ssm2518, false);
+	if (ret)
+		return ret;
+
+	return snd_soc_register_codec(&i2c->dev, &ssm2518_codec_driver,
+			&ssm2518_dai, 1);
+}
+
+static int ssm2518_i2c_remove(struct i2c_client *client)
+{
+	snd_soc_unregister_codec(&client->dev);
+	return 0;
+}
+
+static const struct i2c_device_id ssm2518_i2c_ids[] = {
+	{ "ssm2518", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ssm2518_i2c_ids);
+
+static struct i2c_driver ssm2518_driver = {
+	.driver = {
+		.name = "ssm2518",
+		.owner = THIS_MODULE,
+	},
+	.probe = ssm2518_i2c_probe,
+	.remove = ssm2518_i2c_remove,
+	.id_table = ssm2518_i2c_ids,
+};
+module_i2c_driver(ssm2518_driver);
+
+MODULE_DESCRIPTION("ASoC SSM2518 driver");
+MODULE_AUTHOR("Lars-Peter Clausen <lars at metafoo.de>");
+MODULE_LICENSE("GPL");
diff --git a/sound/soc/codecs/ssm2518.h b/sound/soc/codecs/ssm2518.h
new file mode 100644
index 0000000..62511d8
--- /dev/null
+++ b/sound/soc/codecs/ssm2518.h
@@ -0,0 +1,20 @@
+/*
+ * SSM2518 amplifier audio driver
+ *
+ * Copyright 2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars at metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __SND_SOC_CODECS_SSM2518_H__
+#define __SND_SOC_CODECS_SSM2518_H__
+
+#define SSM2518_SYSCLK 0
+
+enum ssm2518_sysclk_src {
+	SSM2518_SYSCLK_SRC_MCLK = 0,
+	SSM2518_SYSCLK_SRC_BCLK = 1,
+};
+
+#endif
-- 
1.8.0



More information about the Alsa-devel mailing list