[alsa-devel] twl4030 and Puredata/jack

[Gabriel M. Beddingfield]

On 03/08/2013 07:31 AM, Anders Alex wrote:
> I will paste a couple of use-cases and their corresponding dmesg output:
>
> When I run ~$ pd -alsa I get:
>
> snd_pcm_hw_params (input): Invalid argument
> snd_pcm_hw_params (output): Invalid argument
>
> and:
> [201429.385345] omap_mcbsp_dai_hw_params: not enough bandwidth for desired
> rate and channels
> [201429.385375] asoc: interface omap-mcbsp-dai.1 hw params failed

Strange.  In kernel 3.2, omap-mcbsp-dai.1 (McBSP1) is used for the 
codec.  But in the mainline it's omap-mcbsp-dai.2.

So the question is... how is the board wired?  And does your kernel 
match the board?

> With 'jackd -d alsa -S'  (need s16_le):
>
> loading driver ..
> creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|16bit
> control device hw:0
> configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
> ALSA: final selected sample format for capture: 16bit little-endian
> ALSA: use 2 periods for capture
> ALSA: cannot set hardware parameters for capture
> ALSA: cannot configure capture channel

Looking at the source, it looks like hw:0,0 has no capture port.  Try 
adding the -P parameter to jackd.  Playback only.

Also, post the output of:

    $ cat /proc/asound/devices

-gabriel