[alsa-devel] [PATCH] davinci-mcasp: don't overwrite DIT settings

Daniel Mack zonque at gmail.com
Mon Mar 4 10:45:34 CET 2013


Hi Yegor,

On 04.03.2013 10:38, yegorslists at googlemail.com wrote:
> From: Yegor Yefremov <yegorslists at googlemail.com>
> 
> Channel size settings will be made at the end of
> davinci_mcasp_hw_params() routine and thus overwrite frame
> format settings made for DIT mode. This patch fixes this issue
> by taking op_mode into account. Tested with official PSP 3.2
> kernel and sii9022a HDMI transmitter.
> 
> Signed-off-by: Yegor Yefremov <yegorslists at googlemail.com>
> ---
>  sound/soc/davinci/davinci-mcasp.c |   27 +++++++++++++++++----------
>  1 files changed, 17 insertions(+), 10 deletions(-)
> 
> diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
> index 90a9b99..de59075 100644
> --- a/sound/soc/davinci/davinci-mcasp.c
> +++ b/sound/soc/davinci/davinci-mcasp.c
> @@ -643,16 +643,23 @@ static int davinci_config_channel_size(struct davinci_audio_dev *dev,
>  	/* mapping of the XSSZ bit-field as described in the datasheet */
>  	fmt = (word_length >> 1) - 1;
>  
> -	mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG,
> -					RXSSZ(fmt), RXSSZ(0x0F));
> -	mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG,
> -					TXSSZ(fmt), TXSSZ(0x0F));
> -	mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXROT(rotate),
> -							TXROT(7));
> -	mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG, RXROT(rotate),
> -							RXROT(7));
> -	mcasp_set_reg(dev->base + DAVINCI_MCASP_TXMASK_REG, mask);
> -	mcasp_set_reg(dev->base + DAVINCI_MCASP_RXMASK_REG, mask);
> +	if (dev->op_mode == DAVINCI_MCASP_DIT_MODE)
> +	{
> +		mcasp_set_reg(dev->base + DAVINCI_MCASP_TXMASK_REG, mask);
> +	}
> +	else

The indentation is wrong here. Please see Documentation/CodingStyle, or
let scripts/checkpatch.pl have a look :)

> +	{
> +		mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG,
> +						RXSSZ(fmt), RXSSZ(0x0F));
> +		mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG,
> +						TXSSZ(fmt), TXSSZ(0x0F));
> +		mcasp_mod_bits(dev->base + DAVINCI_MCASP_TXFMT_REG, TXROT(rotate),
> +								TXROT(7));
> +		mcasp_mod_bits(dev->base + DAVINCI_MCASP_RXFMT_REG, RXROT(rotate),
> +								RXROT(7));
> +		mcasp_set_reg(dev->base + DAVINCI_MCASP_TXMASK_REG, mask);

As you do the same thing with the DAVINCI_MCASP_TXMASK_REG here as in
the branch above, you can as well pull it out of the if-block and invert
the condition, right?


Thanks,
Daniel



More information about the Alsa-devel mailing list