[alsa-devel] [PATCH 3/6] sound/pci:trivial: replace numeric with standard PM state macros
Takashi Iwai
tiwai at suse.de
Thu Jun 27 15:06:26 CEST 2013
At Thu, 27 Jun 2013 20:55:11 +0800,
Yijing Wang wrote:
>
> Use standard PM state macros PCI_Dx instead of numeric 0/1/2..
>
> Signed-off-by: Yijing Wang <wangyijing at huawei.com>
> Cc: Jaroslav Kysela <perex at perex.cz>
> Cc: Takashi Iwai <tiwai at suse.de>
> Cc: Jiri Kosina <trivial at kernel.org>
> Cc: Bill Pemberton <wfp5p at virginia.edu>
> Cc: alsa-devel at alsa-project.org
> Cc: linux-kernel at vger.kernel.org
Thanks, applied.
Takashi
> ---
> sound/pci/cs4281.c | 2 +-
> sound/pci/ens1370.c | 2 +-
> sound/pci/ymfpci/ymfpci_main.c | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
> index 6a86950..2f6a4b6 100644
> --- a/sound/pci/cs4281.c
> +++ b/sound/pci/cs4281.c
> @@ -1312,7 +1312,7 @@ static int snd_cs4281_free(struct cs4281 *chip)
> /* Sound System Power Management - Turn Everything OFF */
> snd_cs4281_pokeBA0(chip, BA0_SSPM, 0);
> /* PCI interface - D3 state */
> - pci_set_power_state(chip->pci, 3);
> + pci_set_power_state(chip->pci, PCI_D3hot);
>
> if (chip->irq >= 0)
> free_irq(chip->irq, chip);
> diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
> index db2dc83..b30afd1 100644
> --- a/sound/pci/ens1370.c
> +++ b/sound/pci/ens1370.c
> @@ -1939,7 +1939,7 @@ static int snd_ensoniq_free(struct ensoniq *ensoniq)
> #endif
> if (ensoniq->irq >= 0)
> synchronize_irq(ensoniq->irq);
> - pci_set_power_state(ensoniq->pci, 3);
> + pci_set_power_state(ensoniq->pci, PCI_D3hot);
> __hw_end:
> #ifdef CHIP1370
> if (ensoniq->dma_bug.area)
> diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c
> index 22056c5..d591c15 100644
> --- a/sound/pci/ymfpci/ymfpci_main.c
> +++ b/sound/pci/ymfpci/ymfpci_main.c
> @@ -2258,7 +2258,7 @@ static int snd_ymfpci_free(struct snd_ymfpci *chip)
> /* FIXME: temporarily disabled, otherwise we cannot fire up
> * the chip again unless reboot. ACPI bug?
> */
> - pci_set_power_state(chip->pci, 3);
> + pci_set_power_state(chip->pci, PCI_D3hot);
> #endif
>
> #ifdef CONFIG_PM_SLEEP
> --
> 1.7.1
>
>
More information about the Alsa-devel
mailing list