[alsa-devel] [RFC PATCH v2 12/12] ARM: s3c64xx: Add support for DMA using generic amba-pl08x driver
Tomasz Figa
tomasz.figa at gmail.com
Sat Jun 22 22:42:44 CEST 2013
This patch adds all required platform-specific data and initialization
code to support the generic amba-pl08x driver on S3C64xx SoCs.
Also some compatibility definitions are added to make the transition
from legacy API to DMA engine easier. The biggest hack here is passing
const char * pointers through DMA resource, casted to unsigned long,
but this is how Samsung DMA wrappers (used to support both s3c-dma and
DMA engine in drivers) are designed.
Signed-off-by: Tomasz Figa <tomasz.figa at gmail.com>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-s3c64xx/Kconfig | 8 +-
arch/arm/mach-s3c64xx/Makefile | 1 +
arch/arm/mach-s3c64xx/common.h | 5 +
arch/arm/mach-s3c64xx/include/mach/dma.h | 65 ++++++++
arch/arm/mach-s3c64xx/pl080.c | 244 +++++++++++++++++++++++++++++++
6 files changed, 323 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-s3c64xx/pl080.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5413187..8ab0fcc 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -721,6 +721,7 @@ config ARCH_S3C64XX
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
select ARM_VIC
select CLKDEV_LOOKUP
select CLKSRC_MMIO
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 5189d30..54ff9ab 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -19,9 +19,15 @@ config CPU_S3C6410
help
Enable S3C6410 CPU support
+config S3C64XX_PL080
+ bool "S3C64XX DMA using generic PL08x driver"
+ select AMBA_PL08X
+ select SAMSUNG_DMADEV
+
config S3C64XX_DMA
- bool "S3C64XX DMA"
+ bool "S3C64XX DMA using legacy S3C DMA API"
select S3C_DMA
+ depends on !S3C64XX_PL080
config S3C64XX_SETUP_SDHCI
bool
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 6faedcf..e8e9a46 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o
# DMA support
obj-$(CONFIG_S3C64XX_DMA) += dma.o
+obj-$(CONFIG_S3C64XX_PL080) += pl080.o
# Device support
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index bd3bd56..7043e7a 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -58,4 +58,9 @@ int __init s3c64xx_pm_late_initcall(void);
static inline int s3c64xx_pm_late_initcall(void) { return 0; }
#endif
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index fe1a98c..6f88965 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -11,6 +11,8 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
+#ifdef CONFIG_S3C64XX_DMA
+
#define S3C_DMA_CHANNELS (16)
/* see mach-s3c2410/dma.h for notes on dma channel numbers */
@@ -128,4 +130,67 @@ struct s3c2410_dma_chan {
#include <plat/dma-core.h>
+#else
+
+#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name))
+
+/* DMA0/SDMA0 */
+#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx")
+
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx")
+
+enum dma_ch {
+ DMACH_MAX = 32
+};
+
+struct s3c2410_dma_client {
+ char *name;
+};
+
+static inline bool samsung_dma_has_circular(void)
+{
+ return true;
+}
+
+static inline bool samsung_dma_is_dmadev(void)
+{
+ return true;
+}
+
+#define pl330_filter pl08x_filter_id
+
+#include <linux/amba/pl08x.h>
+#include <plat/dma-ops.h>
+
+#endif
+
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
new file mode 100644
index 0000000..901a984
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -0,0 +1,244 @@
+/*
+ * Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+ return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+ {
+ .bus_id = "uart0_tx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart0_rx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_tx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_rx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart3_tx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart3_rx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm0_tx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm0_rx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s0_tx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s0_rx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi0_tx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi0_rx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s2_tx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s2_rx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .periph_buses = PL08X_AHB2,
+ }
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl_memcpy =
+ (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl08x_get_xfer_signal,
+ .put_xfer_signal = pl08x_put_xfer_signal,
+ .slave_channels = s3c64xx_dma0_info,
+ .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+ 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+ {
+ .bus_id = "pcm1_tx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm1_rx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s1_tx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s1_rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi1_tx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi1_rx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_out",
+ .min_signal = 6,
+ .max_signal = 6,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_in",
+ .min_signal = 7,
+ .max_signal = 7,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_mic",
+ .min_signal = 8,
+ .max_signal = 8,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pwm",
+ .min_signal = 9,
+ .max_signal = 9,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 10,
+ .max_signal = 10,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "external",
+ .min_signal = 11,
+ .max_signal = 11,
+ .periph_buses = PL08X_AHB2,
+ },
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl_memcpy =
+ (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl08x_get_xfer_signal,
+ .put_xfer_signal = pl08x_put_xfer_signal,
+ .slave_channels = s3c64xx_dma1_info,
+ .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+ 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+ /* Set all DMA configuration to be DMA, not SDMA */
+ writel(0xffffff, S3C64XX_SDMA_SEL);
+
+ if (of_have_populated_dt())
+ return 0;
+
+ amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+ amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+ return 0;
+}
+arch_initcall(s3c64xx_pl080_init);
--
1.8.2.1
More information about the Alsa-devel
mailing list