[alsa-devel] [PATCH v3] Add M2Tech hiFace USB-SPDIF driver
Antonio Ospite
ao2 at amarulasolutions.com
Sat Jun 22 00:14:46 CEST 2013
Add driver for M2Tech hiFace USB-SPDIF interface and compatible devices.
M2Tech hiFace and compatible devices offer a Hi-End S/PDIF Output
Interface, see http://www.m2tech.biz/hiface.html
The supported products are:
* M2Tech Young
* M2Tech hiFace
* M2Tech North Star
* M2Tech W4S Young
* M2Tech Corrson
* M2Tech AUDIA
* M2Tech SL Audio
* M2Tech Empirical
* M2Tech Rockna
* M2Tech Pathos
* M2Tech Metronome
* M2Tech CAD
* M2Tech Audio Esclusive
* M2Tech Rotel
* M2Tech Eeaudio
* The Chord Company CHORD
* AVA Group A/S Vitus
Signed-off-by: Antonio Ospite <ao2 at amarulasolutions.com>
---
Hi,
here is the v3 for the hiFace driver, the code is a lot cleaner than v1,
thanks to all the reviewers.
I hope we can make it for 3.11 merge window.
The incremental changes for v3 can be seen one by one at
https://github.com/panicking/snd-usb-asyncaudio/commits/master
in commits from Jun 03, 2013 on; they are also listed below.
Changes since v2:
* Replace snd_printk() with the standard dev_err() and friends
* Replace strcpy() with strlcpy()
* Drop some useless pr_debug() calls
* hiface_pcm_trigger(): use spin_lock_irq()
* hiface_pcm_get_substream(): replace pr_debug with dev_err()
* hiface_pcm_close(): close a race window
* hiface_pcm_abort(): don't stop the alsa stream here
* Simplify the probing scheme to be per-device instead of per-interface
* Drop the index field of hiface_chip as it's not used anywhere
* Use vmalloc buffers
* Cosmetics: adjust indentation of continuation lines
* Don't declare multiple variables in the same statement
* Replace pr_debug() with dev_dbg() and pr_err() with dev_err()
* Stop USB stream unconditionally in hiface_pcm_close()
* Reset panic state to false in hiface_pcm_stream_start()
* Remove a stale comment
* Remove pr_debug("%s: called.\n", __func__) statements
Changes since v1:
* Change the first sentence of the Kconfig entry into "Select this..."
* Remove a useless sentence from the Kconfig entry
* Don't set alsa_rt->hw.rates in hiface_pcm_open()
* Style cleanup, no braces needed in single statement conditional
* Remove the rate field from pcm_runtime
* Use the hiFace name with the lowercase 'h' everywhere
* List actually supported devices in MODULE_SUPPORTED_DEVICE()
* Cosmetics, align values in the rates array
* Use an explicit switch instead of the rate_value array in
hiface_pcm_set_rate()
* Use usb_make_path() when building card->longname
* Use again the implicit mechanism to allocate the card private data
* Downgrade a pr_info to pr_debug in hiface_chip_probe()
* Make device_table const
* Rename PCM_MAX_PACKET_SIZE to PCM_PACKET_SIZE
* Rename MAX_BUFSIZE to PCM_BUFFER_SIZE
* Cosmetics, align symbolic constant values
* Add SNDRV_PCM_RATE_KNOT only when needed
* Declare memcpy_swahw32() as static
* Protect snd_pcm_stop() with snd_pcm_stream_lock_irq()
* Make hiface_pcm_playback() not returning anything
* Move the period elapsed check into hiface_pcm_playback()
* Handle the case of failing URBs in hiface_pcm_out_urb_handler()
* Fix a couple of checkpatch.pl issues
Thanks,
Antonio
sound/usb/Kconfig | 31 +++
sound/usb/Makefile | 2 +-
sound/usb/hiface/Makefile | 2 +
sound/usb/hiface/chip.c | 297 ++++++++++++++++++++++
sound/usb/hiface/chip.h | 30 +++
sound/usb/hiface/pcm.c | 621 ++++++++++++++++++++++++++++++++++++++++++++++
sound/usb/hiface/pcm.h | 24 ++
7 files changed, 1006 insertions(+), 1 deletion(-)
create mode 100644 sound/usb/hiface/Makefile
create mode 100644 sound/usb/hiface/chip.c
create mode 100644 sound/usb/hiface/chip.h
create mode 100644 sound/usb/hiface/pcm.c
create mode 100644 sound/usb/hiface/pcm.h
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 225dfd7..de9408b 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -115,5 +115,36 @@ config SND_USB_6FIRE
and further help can be found at
http://sixfireusb.sourceforge.net
+config SND_USB_HIFACE
+ tristate "M2Tech hiFace USB-SPDIF driver"
+ select SND_PCM
+ help
+ Select this option to include support for M2Tech hiFace USB-SPDIF
+ interface.
+
+ This driver supports the original M2Tech hiFace and some other
+ compatible devices. The supported products are:
+
+ * M2Tech Young
+ * M2Tech hiFace
+ * M2Tech North Star
+ * M2Tech W4S Young
+ * M2Tech Corrson
+ * M2Tech AUDIA
+ * M2Tech SL Audio
+ * M2Tech Empirical
+ * M2Tech Rockna
+ * M2Tech Pathos
+ * M2Tech Metronome
+ * M2Tech CAD
+ * M2Tech Audio Esclusive
+ * M2Tech Rotel
+ * M2Tech Eeaudio
+ * The Chord Company CHORD
+ * AVA Group A/S Vitus
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-usb-hiface.
+
endif # SND_USB
diff --git a/sound/usb/Makefile b/sound/usb/Makefile
index ac256dc..abe668f 100644
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -23,4 +23,4 @@ obj-$(CONFIG_SND_USB_UA101) += snd-usbmidi-lib.o
obj-$(CONFIG_SND_USB_USX2Y) += snd-usbmidi-lib.o
obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o
-obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/
+obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/
diff --git a/sound/usb/hiface/Makefile b/sound/usb/hiface/Makefile
new file mode 100644
index 0000000..463b136
--- /dev/null
+++ b/sound/usb/hiface/Makefile
@@ -0,0 +1,2 @@
+snd-usb-hiface-objs := chip.o pcm.o
+obj-$(CONFIG_SND_USB_HIFACE) += snd-usb-hiface.o
diff --git a/sound/usb/hiface/chip.c b/sound/usb/hiface/chip.c
new file mode 100644
index 0000000..b0dcb39
--- /dev/null
+++ b/sound/usb/hiface/chip.c
@@ -0,0 +1,297 @@
+/*
+ * Linux driver for M2Tech hiFace compatible devices
+ *
+ * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V.
+ *
+ * Authors: Michael Trimarchi <michael at amarulasolutions.com>
+ * Antonio Ospite <ao2 at amarulasolutions.com>
+ *
+ * The driver is based on the work done in TerraTec DMX 6Fire USB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <sound/initval.h>
+
+#include "chip.h"
+#include "pcm.h"
+
+MODULE_AUTHOR("Michael Trimarchi <michael at amarulasolutions.com>");
+MODULE_AUTHOR("Antonio Ospite <ao2 at amarulasolutions.com>");
+MODULE_DESCRIPTION("M2Tech hiFace USB-SPDIF audio driver");
+MODULE_LICENSE("GPL v2");
+MODULE_SUPPORTED_DEVICE("{{M2Tech,Young},"
+ "{M2Tech,hiFace},"
+ "{M2Tech,North Star},"
+ "{M2Tech,W4S Young},"
+ "{M2Tech,Corrson},"
+ "{M2Tech,AUDIA},"
+ "{M2Tech,SL Audio},"
+ "{M2Tech,Empirical},"
+ "{M2Tech,Rockna},"
+ "{M2Tech,Pathos},"
+ "{M2Tech,Metronome},"
+ "{M2Tech,CAD},"
+ "{M2Tech,Audio Esclusive},"
+ "{M2Tech,Rotel},"
+ "{M2Tech,Eeaudio},"
+ "{The Chord Company,CHORD},"
+ "{AVA Group A/S,Vitus}}");
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for card */
+static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */
+
+#define DRIVER_NAME "snd-usb-hiface"
+#define CARD_NAME "hiFace"
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard.");
+module_param_array(id, charp, NULL, 0444);
+MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard.");
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard.");
+
+static DEFINE_MUTEX(register_mutex);
+
+struct hiface_vendor_quirk {
+ const char *device_name;
+ u8 extra_freq;
+};
+
+static int hiface_chip_create(struct usb_device *device, int idx,
+ const struct hiface_vendor_quirk *quirk,
+ struct hiface_chip **rchip)
+{
+ struct snd_card *card = NULL;
+ struct hiface_chip *chip;
+ int ret;
+ int len;
+
+ *rchip = NULL;
+
+ /* if we are here, card can be registered in alsa. */
+ ret = snd_card_create(index[idx], id[idx], THIS_MODULE, sizeof(*chip), &card);
+ if (ret < 0) {
+ dev_err(&device->dev, "cannot create alsa card.\n");
+ return ret;
+ }
+
+ strlcpy(card->driver, DRIVER_NAME, sizeof(card->driver));
+
+ if (quirk && quirk->device_name)
+ strlcpy(card->shortname, quirk->device_name, sizeof(card->shortname));
+ else
+ strlcpy(card->shortname, "M2Tech generic audio", sizeof(card->shortname));
+
+ strlcat(card->longname, card->shortname, sizeof(card->longname));
+ len = strlcat(card->longname, " at ", sizeof(card->longname));
+ if (len < sizeof(card->longname))
+ usb_make_path(device, card->longname + len,
+ sizeof(card->longname) - len);
+
+ chip = card->private_data;
+ chip->dev = device;
+ chip->card = card;
+
+ *rchip = chip;
+ return 0;
+}
+
+static int hiface_chip_probe(struct usb_interface *intf,
+ const struct usb_device_id *usb_id)
+{
+ const struct hiface_vendor_quirk *quirk = (struct hiface_vendor_quirk *)usb_id->driver_info;
+ int ret;
+ int i;
+ struct hiface_chip *chip;
+ struct usb_device *device = interface_to_usbdev(intf);
+
+ ret = usb_set_interface(device, 0, 0);
+ if (ret != 0) {
+ dev_err(&device->dev, "can't set first interface for " CARD_NAME " device.\n");
+ return -EIO;
+ }
+
+ /* check whether the card is already registered */
+ chip = NULL;
+ mutex_lock(®ister_mutex);
+
+ for (i = 0; i < SNDRV_CARDS; i++)
+ if (enable[i])
+ break;
+
+ if (i >= SNDRV_CARDS) {
+ dev_err(&device->dev, "no available " CARD_NAME " audio device\n");
+ ret = -ENODEV;
+ goto err;
+ }
+
+ ret = hiface_chip_create(device, i, quirk, &chip);
+ if (ret < 0)
+ goto err;
+
+ snd_card_set_dev(chip->card, &intf->dev);
+
+ ret = hiface_pcm_init(chip, quirk ? quirk->extra_freq : 0);
+ if (ret < 0)
+ goto err_chip_destroy;
+
+ ret = snd_card_register(chip->card);
+ if (ret < 0) {
+ dev_err(&device->dev, "cannot register " CARD_NAME " card\n");
+ goto err_chip_destroy;
+ }
+
+ mutex_unlock(®ister_mutex);
+
+ usb_set_intfdata(intf, chip);
+ return 0;
+
+err_chip_destroy:
+ snd_card_free(chip->card);
+err:
+ mutex_unlock(®ister_mutex);
+ return ret;
+}
+
+static void hiface_chip_disconnect(struct usb_interface *intf)
+{
+ struct hiface_chip *chip;
+ struct snd_card *card;
+
+ chip = usb_get_intfdata(intf);
+ if (!chip)
+ return;
+
+ card = chip->card;
+
+ /* Make sure that the userspace cannot create new request */
+ snd_card_disconnect(card);
+
+ hiface_pcm_abort(chip);
+ snd_card_free_when_closed(card);
+}
+
+static const struct usb_device_id device_table[] = {
+ {
+ USB_DEVICE(0x04b4, 0x0384),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Young",
+ .extra_freq = 1,
+ }
+ },
+ {
+ USB_DEVICE(0x04b4, 0x930b),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "hiFace",
+ }
+ },
+ {
+ USB_DEVICE(0x04b4, 0x931b),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "North Star",
+ }
+ },
+ {
+ USB_DEVICE(0x04b4, 0x931c),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "W4S Young",
+ }
+ },
+ {
+ USB_DEVICE(0x04b4, 0x931d),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Corrson",
+ }
+ },
+ {
+ USB_DEVICE(0x04b4, 0x931e),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "AUDIA",
+ }
+ },
+ {
+ USB_DEVICE(0x04b4, 0x931f),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "SL Audio",
+ }
+ },
+ {
+ USB_DEVICE(0x04b4, 0x9320),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Empirical",
+ }
+ },
+ {
+ USB_DEVICE(0x04b4, 0x9321),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Rockna",
+ }
+ },
+ {
+ USB_DEVICE(0x249c, 0x9001),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Pathos",
+ }
+ },
+ {
+ USB_DEVICE(0x249c, 0x9002),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Metronome",
+ }
+ },
+ {
+ USB_DEVICE(0x249c, 0x9006),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "CAD",
+ }
+ },
+ {
+ USB_DEVICE(0x249c, 0x9008),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Audio Esclusive",
+ }
+ },
+ {
+ USB_DEVICE(0x249c, 0x931c),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Rotel",
+ }
+ },
+ {
+ USB_DEVICE(0x249c, 0x932c),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Eeaudio",
+ }
+ },
+ {
+ USB_DEVICE(0x245f, 0x931c),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "CHORD",
+ }
+ },
+ {
+ USB_DEVICE(0x25c6, 0x9002),
+ .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) {
+ .device_name = "Vitus",
+ }
+ },
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+static struct usb_driver hiface_usb_driver = {
+ .name = DRIVER_NAME,
+ .probe = hiface_chip_probe,
+ .disconnect = hiface_chip_disconnect,
+ .id_table = device_table,
+};
+
+module_usb_driver(hiface_usb_driver);
diff --git a/sound/usb/hiface/chip.h b/sound/usb/hiface/chip.h
new file mode 100644
index 0000000..189a137
--- /dev/null
+++ b/sound/usb/hiface/chip.h
@@ -0,0 +1,30 @@
+/*
+ * Linux driver for M2Tech hiFace compatible devices
+ *
+ * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V.
+ *
+ * Authors: Michael Trimarchi <michael at amarulasolutions.com>
+ * Antonio Ospite <ao2 at amarulasolutions.com>
+ *
+ * The driver is based on the work done in TerraTec DMX 6Fire USB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef HIFACE_CHIP_H
+#define HIFACE_CHIP_H
+
+#include <linux/usb.h>
+#include <sound/core.h>
+
+struct pcm_runtime;
+
+struct hiface_chip {
+ struct usb_device *dev;
+ struct snd_card *card;
+ struct pcm_runtime *pcm;
+};
+#endif /* HIFACE_CHIP_H */
diff --git a/sound/usb/hiface/pcm.c b/sound/usb/hiface/pcm.c
new file mode 100644
index 0000000..6430ed2
--- /dev/null
+++ b/sound/usb/hiface/pcm.c
@@ -0,0 +1,621 @@
+/*
+ * Linux driver for M2Tech hiFace compatible devices
+ *
+ * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V.
+ *
+ * Authors: Michael Trimarchi <michael at amarulasolutions.com>
+ * Antonio Ospite <ao2 at amarulasolutions.com>
+ *
+ * The driver is based on the work done in TerraTec DMX 6Fire USB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/slab.h>
+#include <sound/pcm.h>
+
+#include "pcm.h"
+#include "chip.h"
+
+#define OUT_EP 0x2
+#define PCM_N_URBS 8
+#define PCM_PACKET_SIZE 4096
+#define PCM_BUFFER_SIZE (2 * PCM_N_URBS * PCM_PACKET_SIZE)
+
+struct pcm_urb {
+ struct hiface_chip *chip;
+
+ struct urb instance;
+ struct usb_anchor submitted;
+ u8 *buffer;
+};
+
+struct pcm_substream {
+ spinlock_t lock;
+ struct snd_pcm_substream *instance;
+
+ bool active;
+ snd_pcm_uframes_t dma_off; /* current position in alsa dma_area */
+ snd_pcm_uframes_t period_off; /* current position in current period */
+};
+
+enum { /* pcm streaming states */
+ STREAM_DISABLED, /* no pcm streaming */
+ STREAM_STARTING, /* pcm streaming requested, waiting to become ready */
+ STREAM_RUNNING, /* pcm streaming running */
+ STREAM_STOPPING
+};
+
+struct pcm_runtime {
+ struct hiface_chip *chip;
+ struct snd_pcm *instance;
+
+ struct pcm_substream playback;
+ bool panic; /* if set driver won't do anymore pcm on device */
+
+ struct pcm_urb out_urbs[PCM_N_URBS];
+
+ struct mutex stream_mutex;
+ u8 stream_state; /* one of STREAM_XXX */
+ u8 extra_freq;
+ wait_queue_head_t stream_wait_queue;
+ bool stream_wait_cond;
+};
+
+static const unsigned int rates[] = { 44100, 48000, 88200, 96000, 176400, 192000,
+ 352800, 384000 };
+static const struct snd_pcm_hw_constraint_list constraints_extra_rates = {
+ .count = ARRAY_SIZE(rates),
+ .list = rates,
+ .mask = 0,
+};
+
+static const struct snd_pcm_hardware pcm_hw = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_PAUSE |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
+
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+
+ .rates = SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_176400 |
+ SNDRV_PCM_RATE_192000,
+
+ .rate_min = 44100,
+ .rate_max = 192000, /* changes in hiface_pcm_open to support extra rates */
+ .channels_min = 2,
+ .channels_max = 2,
+ .buffer_bytes_max = PCM_BUFFER_SIZE,
+ .period_bytes_min = PCM_PACKET_SIZE,
+ .period_bytes_max = PCM_BUFFER_SIZE,
+ .periods_min = 2,
+ .periods_max = 1024
+};
+
+/* message values used to change the sample rate */
+#define HIFACE_SET_RATE_REQUEST 0xb0
+
+#define HIFACE_RATE_44100 0x43
+#define HIFACE_RATE_48000 0x4b
+#define HIFACE_RATE_88200 0x42
+#define HIFACE_RATE_96000 0x4a
+#define HIFACE_RATE_176400 0x40
+#define HIFACE_RATE_192000 0x48
+#define HIFACE_RATE_352000 0x58
+#define HIFACE_RATE_384000 0x68
+
+static int hiface_pcm_set_rate(struct pcm_runtime *rt, unsigned int rate)
+{
+ struct usb_device *device = rt->chip->dev;
+ u16 rate_value;
+ int ret;
+
+ /* We are already sure that the rate is supported here thanks to
+ * ALSA constraints
+ */
+ switch (rate) {
+ case 44100:
+ rate_value = HIFACE_RATE_44100;
+ break;
+ case 48000:
+ rate_value = HIFACE_RATE_48000;
+ break;
+ case 88200:
+ rate_value = HIFACE_RATE_88200;
+ break;
+ case 96000:
+ rate_value = HIFACE_RATE_96000;
+ break;
+ case 176400:
+ rate_value = HIFACE_RATE_176400;
+ break;
+ case 192000:
+ rate_value = HIFACE_RATE_192000;
+ break;
+ case 352000:
+ rate_value = HIFACE_RATE_352000;
+ break;
+ case 384000:
+ rate_value = HIFACE_RATE_384000;
+ break;
+ default:
+ dev_err(&device->dev, "Unsupported rate %d\n", rate);
+ return -EINVAL;
+ }
+
+ /*
+ * USBIO: Vendor 0xb0(wValue=0x0043, wIndex=0x0000)
+ * 43 b0 43 00 00 00 00 00
+ * USBIO: Vendor 0xb0(wValue=0x004b, wIndex=0x0000)
+ * 43 b0 4b 00 00 00 00 00
+ * This control message doesn't have any ack from the
+ * other side
+ */
+ ret = usb_control_msg(device, usb_sndctrlpipe(device, 0),
+ HIFACE_SET_RATE_REQUEST,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER,
+ rate_value, 0, NULL, 0, 100);
+ if (ret < 0) {
+ dev_err(&device->dev, "Error setting samplerate %d.\n", rate);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct pcm_substream *hiface_pcm_get_substream(struct snd_pcm_substream
+ *alsa_sub)
+{
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ struct device *device = &rt->chip->dev->dev;
+
+ if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ return &rt->playback;
+
+ dev_err(device, "Error getting pcm substream slot.\n");
+ return NULL;
+}
+
+/* call with stream_mutex locked */
+static void hiface_pcm_stream_stop(struct pcm_runtime *rt)
+{
+ int i, time;
+
+ if (rt->stream_state != STREAM_DISABLED) {
+ rt->stream_state = STREAM_STOPPING;
+
+ for (i = 0; i < PCM_N_URBS; i++) {
+ time = usb_wait_anchor_empty_timeout(
+ &rt->out_urbs[i].submitted, 100);
+ if (!time)
+ usb_kill_anchored_urbs(
+ &rt->out_urbs[i].submitted);
+ usb_kill_urb(&rt->out_urbs[i].instance);
+ }
+
+ rt->stream_state = STREAM_DISABLED;
+ }
+}
+
+/* call with stream_mutex locked */
+static int hiface_pcm_stream_start(struct pcm_runtime *rt)
+{
+ int ret = 0;
+ int i;
+
+ if (rt->stream_state == STREAM_DISABLED) {
+
+ /* reset panic state when starting a new stream */
+ rt->panic = false;
+
+ /* submit our out urbs zero init */
+ rt->stream_state = STREAM_STARTING;
+ for (i = 0; i < PCM_N_URBS; i++) {
+ memset(rt->out_urbs[i].buffer, 0, PCM_PACKET_SIZE);
+ usb_anchor_urb(&rt->out_urbs[i].instance,
+ &rt->out_urbs[i].submitted);
+ ret = usb_submit_urb(&rt->out_urbs[i].instance,
+ GFP_ATOMIC);
+ if (ret) {
+ hiface_pcm_stream_stop(rt);
+ return ret;
+ }
+ }
+
+ /* wait for first out urb to return (sent in in urb handler) */
+ wait_event_timeout(rt->stream_wait_queue, rt->stream_wait_cond,
+ HZ);
+ if (rt->stream_wait_cond) {
+ struct device *device = &rt->chip->dev->dev;
+ dev_dbg(device, "%s: Stream is running wakeup event\n",
+ __func__);
+ rt->stream_state = STREAM_RUNNING;
+ } else {
+ hiface_pcm_stream_stop(rt);
+ return -EIO;
+ }
+ }
+ return ret;
+}
+
+/* The hardware wants word-swapped 32-bit values */
+static void memcpy_swahw32(u8 *dest, u8 *src, unsigned int n)
+{
+ unsigned int i;
+
+ for (i = 0; i < n / 4; i++)
+ ((u32 *)dest)[i] = swahw32(((u32 *)src)[i]);
+}
+
+/* call with substream locked */
+/* returns true if a period elapsed */
+static bool hiface_pcm_playback(struct pcm_substream *sub, struct pcm_urb *urb)
+{
+ struct snd_pcm_runtime *alsa_rt = sub->instance->runtime;
+ struct device *device = &urb->chip->dev->dev;
+ u8 *source;
+ unsigned int pcm_buffer_size;
+
+ WARN_ON(alsa_rt->format != SNDRV_PCM_FORMAT_S32_LE);
+
+ pcm_buffer_size = snd_pcm_lib_buffer_bytes(sub->instance);
+
+ if (sub->dma_off + PCM_PACKET_SIZE <= pcm_buffer_size) {
+ dev_dbg(device, "%s: (1) buffer_size %#x dma_offset %#x\n", __func__,
+ (unsigned int) pcm_buffer_size,
+ (unsigned int) sub->dma_off);
+
+ source = alsa_rt->dma_area + sub->dma_off;
+ memcpy_swahw32(urb->buffer, source, PCM_PACKET_SIZE);
+ } else {
+ /* wrap around at end of ring buffer */
+ unsigned int len;
+
+ dev_dbg(device, "%s: (2) buffer_size %#x dma_offset %#x\n", __func__,
+ (unsigned int) pcm_buffer_size,
+ (unsigned int) sub->dma_off);
+
+ len = pcm_buffer_size - sub->dma_off;
+
+ source = alsa_rt->dma_area + sub->dma_off;
+ memcpy_swahw32(urb->buffer, source, len);
+
+ source = alsa_rt->dma_area;
+ memcpy_swahw32(urb->buffer + len, source,
+ PCM_PACKET_SIZE - len);
+ }
+ sub->dma_off += PCM_PACKET_SIZE;
+ if (sub->dma_off >= pcm_buffer_size)
+ sub->dma_off -= pcm_buffer_size;
+
+ sub->period_off += PCM_PACKET_SIZE;
+ if (sub->period_off >= alsa_rt->period_size) {
+ sub->period_off %= alsa_rt->period_size;
+ return true;
+ }
+ return false;
+}
+
+static void hiface_pcm_out_urb_handler(struct urb *usb_urb)
+{
+ struct pcm_urb *out_urb = usb_urb->context;
+ struct pcm_runtime *rt = out_urb->chip->pcm;
+ struct pcm_substream *sub;
+ bool do_period_elapsed = false;
+ unsigned long flags;
+ int ret;
+
+ if (rt->panic || rt->stream_state == STREAM_STOPPING)
+ return;
+
+ if (unlikely(usb_urb->status == -ENOENT || /* unlinked */
+ usb_urb->status == -ENODEV || /* device removed */
+ usb_urb->status == -ECONNRESET || /* unlinked */
+ usb_urb->status == -ESHUTDOWN)) { /* device disabled */
+ goto out_fail;
+ }
+
+ if (rt->stream_state == STREAM_STARTING) {
+ rt->stream_wait_cond = true;
+ wake_up(&rt->stream_wait_queue);
+ }
+
+ /* now send our playback data (if a free out urb was found) */
+ sub = &rt->playback;
+ spin_lock_irqsave(&sub->lock, flags);
+ if (sub->active)
+ do_period_elapsed = hiface_pcm_playback(sub, out_urb);
+ else
+ memset(out_urb->buffer, 0, PCM_PACKET_SIZE);
+
+ spin_unlock_irqrestore(&sub->lock, flags);
+
+ if (do_period_elapsed)
+ snd_pcm_period_elapsed(sub->instance);
+
+ ret = usb_submit_urb(&out_urb->instance, GFP_ATOMIC);
+ if (ret < 0)
+ goto out_fail;
+
+ return;
+
+out_fail:
+ rt->panic = true;
+}
+
+static int hiface_pcm_open(struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ struct pcm_substream *sub = NULL;
+ struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime;
+ int ret;
+
+ if (rt->panic)
+ return -EPIPE;
+
+ mutex_lock(&rt->stream_mutex);
+ alsa_rt->hw = pcm_hw;
+
+ if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ sub = &rt->playback;
+
+ if (!sub) {
+ struct device *device = &rt->chip->dev->dev;
+ mutex_unlock(&rt->stream_mutex);
+ dev_err(device, "Invalid stream type\n");
+ return -EINVAL;
+ }
+
+ if (rt->extra_freq) {
+ alsa_rt->hw.rates |= SNDRV_PCM_RATE_KNOT;
+ alsa_rt->hw.rate_max = 384000;
+
+ /* explicit constraints needed as we added SNDRV_PCM_RATE_KNOT */
+ ret = snd_pcm_hw_constraint_list(alsa_sub->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ &constraints_extra_rates);
+ if (ret < 0) {
+ mutex_unlock(&rt->stream_mutex);
+ return ret;
+ }
+ }
+
+ sub->instance = alsa_sub;
+ sub->active = false;
+ mutex_unlock(&rt->stream_mutex);
+ return 0;
+}
+
+static int hiface_pcm_close(struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub);
+ unsigned long flags;
+
+ if (rt->panic)
+ return 0;
+
+ mutex_lock(&rt->stream_mutex);
+ if (sub) {
+ hiface_pcm_stream_stop(rt);
+
+ /* deactivate substream */
+ spin_lock_irqsave(&sub->lock, flags);
+ sub->instance = NULL;
+ sub->active = false;
+ spin_unlock_irqrestore(&sub->lock, flags);
+
+ }
+ mutex_unlock(&rt->stream_mutex);
+ return 0;
+}
+
+static int hiface_pcm_hw_params(struct snd_pcm_substream *alsa_sub,
+ struct snd_pcm_hw_params *hw_params)
+{
+ return snd_pcm_lib_alloc_vmalloc_buffer(alsa_sub,
+ params_buffer_bytes(hw_params));
+}
+
+static int hiface_pcm_hw_free(struct snd_pcm_substream *alsa_sub)
+{
+ return snd_pcm_lib_free_vmalloc_buffer(alsa_sub);
+}
+
+static int hiface_pcm_prepare(struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub);
+ struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime;
+ int ret;
+
+ if (rt->panic)
+ return -EPIPE;
+ if (!sub)
+ return -ENODEV;
+
+ mutex_lock(&rt->stream_mutex);
+
+ sub->dma_off = 0;
+ sub->period_off = 0;
+
+ if (rt->stream_state == STREAM_DISABLED) {
+
+ ret = hiface_pcm_set_rate(rt, alsa_rt->rate);
+ if (ret) {
+ mutex_unlock(&rt->stream_mutex);
+ return ret;
+ }
+ ret = hiface_pcm_stream_start(rt);
+ if (ret) {
+ mutex_unlock(&rt->stream_mutex);
+ return ret;
+ }
+ }
+ mutex_unlock(&rt->stream_mutex);
+ return 0;
+}
+
+static int hiface_pcm_trigger(struct snd_pcm_substream *alsa_sub, int cmd)
+{
+ struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub);
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+
+ if (rt->panic)
+ return -EPIPE;
+ if (!sub)
+ return -ENODEV;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ spin_lock_irq(&sub->lock);
+ sub->active = true;
+ spin_unlock_irq(&sub->lock);
+ return 0;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ spin_lock_irq(&sub->lock);
+ sub->active = false;
+ spin_unlock_irq(&sub->lock);
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static snd_pcm_uframes_t hiface_pcm_pointer(struct snd_pcm_substream *alsa_sub)
+{
+ struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub);
+ struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub);
+ unsigned long flags;
+ snd_pcm_uframes_t dma_offset;
+
+ if (rt->panic || !sub)
+ return SNDRV_PCM_STATE_XRUN;
+
+ spin_lock_irqsave(&sub->lock, flags);
+ dma_offset = sub->dma_off;
+ spin_unlock_irqrestore(&sub->lock, flags);
+ return bytes_to_frames(alsa_sub->runtime, dma_offset);
+}
+
+static struct snd_pcm_ops pcm_ops = {
+ .open = hiface_pcm_open,
+ .close = hiface_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = hiface_pcm_hw_params,
+ .hw_free = hiface_pcm_hw_free,
+ .prepare = hiface_pcm_prepare,
+ .trigger = hiface_pcm_trigger,
+ .pointer = hiface_pcm_pointer,
+ .page = snd_pcm_lib_get_vmalloc_page,
+ .mmap = snd_pcm_lib_mmap_vmalloc,
+};
+
+static int hiface_pcm_init_urb(struct pcm_urb *urb,
+ struct hiface_chip *chip,
+ unsigned int ep,
+ void (*handler)(struct urb *))
+{
+ urb->chip = chip;
+ usb_init_urb(&urb->instance);
+
+ urb->buffer = kzalloc(PCM_PACKET_SIZE, GFP_KERNEL);
+ if (!urb->buffer)
+ return -ENOMEM;
+
+ usb_fill_bulk_urb(&urb->instance, chip->dev,
+ usb_sndbulkpipe(chip->dev, ep), (void *)urb->buffer,
+ PCM_PACKET_SIZE, handler, urb);
+ init_usb_anchor(&urb->submitted);
+
+ return 0;
+}
+
+void hiface_pcm_abort(struct hiface_chip *chip)
+{
+ struct pcm_runtime *rt = chip->pcm;
+
+ if (rt) {
+ rt->panic = true;
+
+ mutex_lock(&rt->stream_mutex);
+ hiface_pcm_stream_stop(rt);
+ mutex_unlock(&rt->stream_mutex);
+ }
+}
+
+static void hiface_pcm_destroy(struct hiface_chip *chip)
+{
+ struct pcm_runtime *rt = chip->pcm;
+ int i;
+
+ for (i = 0; i < PCM_N_URBS; i++)
+ kfree(rt->out_urbs[i].buffer);
+
+ kfree(chip->pcm);
+ chip->pcm = NULL;
+}
+
+static void hiface_pcm_free(struct snd_pcm *pcm)
+{
+ struct pcm_runtime *rt = pcm->private_data;
+
+ if (rt)
+ hiface_pcm_destroy(rt->chip);
+}
+
+int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq)
+{
+ int i;
+ int ret;
+ struct snd_pcm *pcm;
+ struct pcm_runtime *rt;
+
+ rt = kzalloc(sizeof(*rt), GFP_KERNEL);
+ if (!rt)
+ return -ENOMEM;
+
+ rt->chip = chip;
+ rt->stream_state = STREAM_DISABLED;
+ if (extra_freq)
+ rt->extra_freq = 1;
+
+ init_waitqueue_head(&rt->stream_wait_queue);
+ mutex_init(&rt->stream_mutex);
+ spin_lock_init(&rt->playback.lock);
+
+ for (i = 0; i < PCM_N_URBS; i++)
+ hiface_pcm_init_urb(&rt->out_urbs[i], chip, OUT_EP,
+ hiface_pcm_out_urb_handler);
+
+ ret = snd_pcm_new(chip->card, "USB-SPDIF Audio", 0, 1, 0, &pcm);
+ if (ret < 0) {
+ kfree(rt);
+ dev_err(&chip->dev->dev, "Cannot create pcm instance\n");
+ return ret;
+ }
+
+ pcm->private_data = rt;
+ pcm->private_free = hiface_pcm_free;
+
+ strlcpy(pcm->name, "USB-SPDIF Audio", sizeof(pcm->name));
+ snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &pcm_ops);
+
+ rt->instance = pcm;
+
+ chip->pcm = rt;
+ return 0;
+}
diff --git a/sound/usb/hiface/pcm.h b/sound/usb/hiface/pcm.h
new file mode 100644
index 0000000..77edd7c
--- /dev/null
+++ b/sound/usb/hiface/pcm.h
@@ -0,0 +1,24 @@
+/*
+ * Linux driver for M2Tech hiFace compatible devices
+ *
+ * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V.
+ *
+ * Authors: Michael Trimarchi <michael at amarulasolutions.com>
+ * Antonio Ospite <ao2 at amarulasolutions.com>
+ *
+ * The driver is based on the work done in TerraTec DMX 6Fire USB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef HIFACE_PCM_H
+#define HIFACE_PCM_H
+
+struct hiface_chip;
+
+int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq);
+void hiface_pcm_abort(struct hiface_chip *chip);
+#endif /* HIFACE_PCM_H */
--
1.8.3.1
More information about the Alsa-devel
mailing list