[alsa-devel] [PATCH v2] sound/sgtl5000: fix codec register initial values and mask

[Fabio Estevam]

On 06/11/2013 12:22 PM, Oskar Schirmer wrote:
> According to documentation bit 3:2 in register SSS_CTRL are
> reserved and zero, so initially setting the register to 0x0008
> does not make much sense. Instead, bit 4 should be marked set,
> as this is the power up default.
>
> Further, mask computation in declarative part is obviously wrong:
> Fix FRAC DIVISOR to provide an 11 bit mask correctly.
>
> Signed-off-by: Oskar Schirmer <oskar at scara.com>
> Tested-by: Fabio Estevam <fabio.estevam at freescale.com>

Looks good, but please copy Mark Brown. Just added him in Cc now.


> ---
>   sound/soc/codecs/sgtl5000.c |    2 +-
>   sound/soc/codecs/sgtl5000.h |    2 +-
>   2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
> index d441559..10092ba 100644
> --- a/sound/soc/codecs/sgtl5000.c
> +++ b/sound/soc/codecs/sgtl5000.c
> @@ -38,7 +38,7 @@
>   static const struct reg_default sgtl5000_reg_defaults[] = {
>   	{ SGTL5000_CHIP_CLK_CTRL,		0x0008 },
>   	{ SGTL5000_CHIP_I2S_CTRL,		0x0010 },
> -	{ SGTL5000_CHIP_SSS_CTRL,		0x0008 },
> +	{ SGTL5000_CHIP_SSS_CTRL,		0x0010 },
>   	{ SGTL5000_CHIP_DAC_VOL,		0x3c3c },
>   	{ SGTL5000_CHIP_PAD_STRENGTH,		0x015f },
>   	{ SGTL5000_CHIP_ANA_HP_CTRL,		0x1818 },
> diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
> index 4b69229..52bd843 100644
> --- a/sound/soc/codecs/sgtl5000.h
> +++ b/sound/soc/codecs/sgtl5000.h
> @@ -347,7 +347,7 @@
>   #define SGTL5000_PLL_INT_DIV_MASK		0xf800
>   #define SGTL5000_PLL_INT_DIV_SHIFT		11
>   #define SGTL5000_PLL_INT_DIV_WIDTH		5
> -#define SGTL5000_PLL_FRAC_DIV_MASK		0x0700
> +#define SGTL5000_PLL_FRAC_DIV_MASK		0x07ff
>   #define SGTL5000_PLL_FRAC_DIV_SHIFT		0
>   #define SGTL5000_PLL_FRAC_DIV_WIDTH		11
>
>