[alsa-devel] [PATCH 1/2] ASoC: sgtl5000: Let the codec acquire its clock
Fabio Estevam
festevam at gmail.com
Mon Jun 10 03:07:46 CEST 2013
From: Fabio Estevam <fabio.estevam at freescale.com>
On a mx6qsabrelite board the following error happens on probe:
sgtl5000: probe of 0-000a failed with error -5
imx-sgtl5000 sound.13: ASoC: CODEC (null) not registered
imx-sgtl5000 sound.13: snd_soc_register_card failed (-517)
platform sound.13: Driver imx-sgtl5000 requests probe defer
Prior to reading the codec ID we need to turn the SYS_MCLK clock, so let's
enable the codec clock inside sgtl5000_i2c_probe().
Also remove the codec clock enable/disable functions from the machine driver.
Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
Shawn,
I haven't had a chance to convert mx28 to pass the codec clock via device tree
yet. It looks like it is a bit trickier there, as it uses the saif clock.
Given that mx28 audio playback is already broken in linux-next, this series
does not make things worse on mx28 side.
sound/soc/codecs/sgtl5000.c | 34 ++++++++++++++++++++++++++++++----
sound/soc/fsl/imx-sgtl5000.c | 30 +++++++-----------------------
2 files changed, 37 insertions(+), 27 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index c8f2afb..2e0227b 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -114,6 +114,7 @@ struct sgtl5000_priv {
struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
struct ldo_regulator *ldo;
struct regmap *regmap;
+ struct clk *mclk;
};
/*
@@ -1522,16 +1523,28 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
return ret;
}
+ sgtl5000->mclk = devm_clk_get(&client->dev, NULL);
+ if (IS_ERR(sgtl5000->mclk)) {
+ ret = PTR_ERR(sgtl5000->mclk);
+ dev_err(&client->dev, "Failed to get mclock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(sgtl5000->mclk);
+ if (ret)
+ return ret;
+
/* read chip information */
ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®);
if (ret)
- return ret;
+ goto disable_clk;
if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
SGTL5000_PARTID_PART_ID) {
dev_err(&client->dev,
"Device with ID register %x is not a sgtl5000\n", reg);
- return -ENODEV;
+ ret = -ENODEV;
+ goto disable_clk;
}
rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
@@ -1542,17 +1555,30 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
/* Ensure sgtl5000 will start with sane register values */
ret = sgtl5000_fill_defaults(sgtl5000);
if (ret)
- return ret;
+ goto disable_clk;
ret = snd_soc_register_codec(&client->dev,
&sgtl5000_driver, &sgtl5000_dai, 1);
+ if (ret)
+ goto disable_clk;
+
+ return 0;
+
+disable_clk:
+ clk_disable_unprepare(sgtl5000->mclk);
return ret;
}
static int sgtl5000_i2c_remove(struct i2c_client *client)
{
- snd_soc_unregister_codec(&client->dev);
+ struct sgtl5000_priv *sgtl5000;
+ sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv),
+ GFP_KERNEL);
+ if (!sgtl5000)
+ return -ENOMEM;
+ snd_soc_unregister_codec(&client->dev);
+ clk_disable_unprepare(sgtl5000->mclk);
return 0;
}
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
index a60aaa0..823151b 100644
--- a/sound/soc/fsl/imx-sgtl5000.c
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -129,20 +129,10 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
}
data->codec_clk = clk_get(&codec_dev->dev, NULL);
- if (IS_ERR(data->codec_clk)) {
- /* assuming clock enabled by default */
- data->codec_clk = NULL;
- ret = of_property_read_u32(codec_np, "clock-frequency",
- &data->clk_frequency);
- if (ret) {
- dev_err(&codec_dev->dev,
- "clock-frequency missing or invalid\n");
- goto fail;
- }
- } else {
- data->clk_frequency = clk_get_rate(data->codec_clk);
- clk_prepare_enable(data->codec_clk);
- }
+ if (IS_ERR(data->codec_clk))
+ goto fail;
+
+ data->clk_frequency = clk_get_rate(data->codec_clk);
data->dai.name = "HiFi";
data->dai.stream_name = "HiFi";
@@ -157,10 +147,10 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
data->card.dev = &pdev->dev;
ret = snd_soc_of_parse_card_name(&data->card, "model");
if (ret)
- goto clk_fail;
+ goto fail;
ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing");
if (ret)
- goto clk_fail;
+ goto fail;
data->card.num_links = 1;
data->card.owner = THIS_MODULE;
data->card.dai_link = &data->dai;
@@ -170,7 +160,7 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
ret = snd_soc_register_card(&data->card);
if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
- goto clk_fail;
+ goto fail;
}
platform_set_drvdata(pdev, data);
@@ -179,8 +169,6 @@ static int imx_sgtl5000_probe(struct platform_device *pdev)
return 0;
-clk_fail:
- clk_put(data->codec_clk);
fail:
if (ssi_np)
of_node_put(ssi_np);
@@ -194,10 +182,6 @@ static int imx_sgtl5000_remove(struct platform_device *pdev)
{
struct imx_sgtl5000_data *data = platform_get_drvdata(pdev);
- if (data->codec_clk) {
- clk_disable_unprepare(data->codec_clk);
- clk_put(data->codec_clk);
- }
snd_soc_unregister_card(&data->card);
return 0;
--
1.8.1.2
More information about the Alsa-devel
mailing list