[alsa-devel] [PATCH V2 1/2] ASoC: WM8962: Create default platform data structure
Nicolin Chen
b42378 at freescale.com
Thu Jun 6 13:38:45 CEST 2013
Embed a copy of struct wm8962_pdata in stuct wm8962_priv
so that there's no need to check validity of pdata any more.
Signed-off-by: Nicolin Chen <b42378 at freescale.com>
---
sound/soc/codecs/wm8962.c | 66 ++++++++++++++++++++++++---------------------
1 files changed, 35 insertions(+), 31 deletions(-)
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index e971028..d56dd86 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -51,6 +51,7 @@ static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = {
/* codec private data */
struct wm8962_priv {
+ struct wm8962_pdata pdata;
struct regmap *regmap;
struct snd_soc_codec *codec;
@@ -2345,12 +2346,13 @@ static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
static int wm8962_add_widgets(struct snd_soc_codec *codec)
{
- struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
+ struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+ struct wm8962_pdata *pdata = &wm8962->pdata;
struct snd_soc_dapm_context *dapm = &codec->dapm;
snd_soc_add_codec_controls(codec, wm8962_snd_controls,
ARRAY_SIZE(wm8962_snd_controls));
- if (pdata && pdata->spk_mono)
+ if (pdata->spk_mono)
snd_soc_add_codec_controls(codec, wm8962_spk_mono_controls,
ARRAY_SIZE(wm8962_spk_mono_controls));
else
@@ -2360,7 +2362,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)
snd_soc_dapm_new_controls(dapm, wm8962_dapm_widgets,
ARRAY_SIZE(wm8962_dapm_widgets));
- if (pdata && pdata->spk_mono)
+ if (pdata->spk_mono)
snd_soc_dapm_new_controls(dapm, wm8962_dapm_spk_mono_widgets,
ARRAY_SIZE(wm8962_dapm_spk_mono_widgets));
else
@@ -2369,7 +2371,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)
snd_soc_dapm_add_routes(dapm, wm8962_intercon,
ARRAY_SIZE(wm8962_intercon));
- if (pdata && pdata->spk_mono)
+ if (pdata->spk_mono)
snd_soc_dapm_add_routes(dapm, wm8962_spk_mono_intercon,
ARRAY_SIZE(wm8962_spk_mono_intercon));
else
@@ -3333,14 +3335,14 @@ static struct gpio_chip wm8962_template_chip = {
static void wm8962_init_gpio(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
+ struct wm8962_pdata *pdata = &wm8962->pdata;
int ret;
wm8962->gpio_chip = wm8962_template_chip;
wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO;
wm8962->gpio_chip.dev = codec->dev;
- if (pdata && pdata->gpio_base)
+ if (pdata->gpio_base)
wm8962->gpio_chip.base = pdata->gpio_base;
else
wm8962->gpio_chip.base = -1;
@@ -3373,7 +3375,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
{
int ret;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
+ struct wm8962_pdata *pdata = &wm8962->pdata;
u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
bool dmicclk, dmicdat;
@@ -3421,30 +3423,28 @@ static int wm8962_probe(struct snd_soc_codec *codec)
WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
0);
- if (pdata) {
- /* Apply static configuration for GPIOs */
- for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++)
- if (pdata->gpio_init[i]) {
- wm8962_set_gpio_mode(codec, i + 1);
- snd_soc_write(codec, 0x200 + i,
- pdata->gpio_init[i] & 0xffff);
- }
+ /* Apply static configuration for GPIOs */
+ for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++)
+ if (pdata->gpio_init[i]) {
+ wm8962_set_gpio_mode(codec, i + 1);
+ snd_soc_write(codec, 0x200 + i,
+ pdata->gpio_init[i] & 0xffff);
+ }
- /* Put the speakers into mono mode? */
- if (pdata->spk_mono)
- reg_cache[WM8962_CLASS_D_CONTROL_2]
- |= WM8962_SPK_MONO;
+ /* Put the speakers into mono mode? */
+ if (pdata->spk_mono)
+ reg_cache[WM8962_CLASS_D_CONTROL_2]
+ |= WM8962_SPK_MONO;
- /* Micbias setup, detection enable and detection
- * threasholds. */
- if (pdata->mic_cfg)
- snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4,
- WM8962_MICDET_ENA |
- WM8962_MICDET_THR_MASK |
- WM8962_MICSHORT_THR_MASK |
- WM8962_MICBIAS_LVL,
- pdata->mic_cfg);
- }
+ /* Micbias setup, detection enable and detection
+ * threasholds. */
+ if (pdata->mic_cfg)
+ snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4,
+ WM8962_MICDET_ENA |
+ WM8962_MICDET_THR_MASK |
+ WM8962_MICSHORT_THR_MASK |
+ WM8962_MICBIAS_LVL,
+ pdata->mic_cfg);
/* Latch volume update bits */
snd_soc_update_bits(codec, WM8962_LEFT_INPUT_VOLUME,
@@ -3506,7 +3506,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
wm8962_init_gpio(codec);
if (wm8962->irq) {
- if (pdata && pdata->irq_active_low) {
+ if (pdata->irq_active_low) {
trigger = IRQF_TRIGGER_LOW;
irq_pol = WM8962_IRQ_POL;
} else {
@@ -3603,6 +3603,10 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
init_completion(&wm8962->fll_lock);
wm8962->irq = i2c->irq;
+ /* If platform data was supplied, update the default data in priv */
+ if (pdata)
+ memcpy(&wm8962->pdata, pdata, sizeof(struct wm8962_pdata));
+
for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
wm8962->supplies[i].supply = wm8962_supply_names[i];
@@ -3666,7 +3670,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
goto err_enable;
}
- if (pdata && pdata->in4_dc_measure) {
+ if (wm8962->pdata.in4_dc_measure) {
ret = regmap_register_patch(wm8962->regmap,
wm8962_dc_measure,
ARRAY_SIZE(wm8962_dc_measure));
--
1.7.1
More information about the Alsa-devel
mailing list