[alsa-devel] No sound with Sony VAIO VPCZ1 (ALC889)

Tormen my.nl.abos at gmail.com
Wed Jul 17 01:23:29 CEST 2013 

Dear Takashi,

On 16/07/13 21:24, Takashi Iwai wrote:
> At Tue, 16 Jul 2013 20:37:19 +0200,
> Tormen wrote:
>> On 16/07/13 11:15, Takashi Iwai wrote:
>>> It doesn't look like the driver patched properly.
>>> Try to put some printk() in the patched code path to confirm that
>>> you're really testing the patched driver.
>>>
>>>
>>> Takashi
>> I am not 100% sure if it was or not, because I had applied the patch not
>> with "quilt"
>> ... but now I am:
>> I put in some printk()'s and it still shows speaker_outs=0 :(
> This doesn't matter at all from the beginning.
> You see a line "line_outs=1 (type: speaker)" before that.  So, the
> speaker output is assigned as the primary output there.
>
> The problem is, instead, that the primary DAC (thus its selector
> widget) is assigned to the headphone.  Check whether NID 0x0c is
> assigned to "Speaker" volume, not for "Headphone".
> The no_primary_hp flag should have achieved it, but it turned out that
> 5.1 surround setup blocks it.  That's why you got "Headphone" on NID
> 0x0c, and 0x0d/0x0e for the rest speaker and possible surrounds.
>
> The new flag, no_multi_io prevents the creation of 5.1 setup, so that
> the speaker will be assigned to NID 0x0c, together with the
> combination of no_primary_hp.
>
>
>> I was wondering if it's a problem that the speaker_outs=0 is printed way
>> before all the "fill_and_eval_dacs" changes of yours are executed?
>>
>> I attached you my patch so that you can see what output corresponds to
>> what piece of code.
>>
>> alsa-info.sh:
>> http://www.alsa-project.org/db/?f=c644b65a9e25fd1cef5b4b53d6d806d45526e5b2
>>
>> And the complete output of my debug messages:
>>
>> FIRST just loading the modules:
>>       modprobe snd debug=2
>>       modprobe snd_hda_intel
>>
>> [10263.731133] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>> [10263.747274] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10263.750059] Tormen: alc882_fixup_no_primary_hp: BBB ==> set
>> spec->no_multi_io = 1
> OK, so far, so good.
> Check whether NID 0x0c is assigned to "Speaker".
I would have to look how to do that.

>
>> [10263.752896] hda_codec: ALC889: SKU not ready 0x411111f0
>> [10263.755938] ALSA hda_auto_parser.c:335 autoconfig: line_outs=1
>> (0x14/0x0/0x0/0x0/0x0) type:speaker
>> [10263.758707] ALSA hda_auto_parser.c:339    speaker_outs=0
>> (0x0/0x0/0x0/0x0/0x0)
>> [10263.761476] ALSA hda_auto_parser.c:343    hp_outs=1
>> (0x15/0x0/0x0/0x0/0x0)
>> [10263.764246] ALSA hda_auto_parser.c:344    mono: mono_out=0x0
>> [10263.767028] ALSA hda_auto_parser.c:348    inputs:
>> [10263.769908] ALSA hda_auto_parser.c:352      Mic=0x18
>> [10263.772632] ALSA hda_auto_parser.c:352      Mic=0x19
>> [10263.775354] ALSA hda_auto_parser.c:352      Internal Mic=0x12
> And this didn't work?  Did you adjust the mixer element again?
> Since this changes the mixer configuration, some new mixer element may
> come up.  Give alsa-info.sh output at this moment, please.
Sure:

http://www.alsa-project.org/db/?f=c8e8a56c21101322df1f5d847f8d1a37c7d44baf

      < Master >
      Headphone
      Speaker
      Surround
      Center
      LFE
      Mic
      Mic Boost
      Mic 1
      Mic Boost 1
      Beep
      Auto-Mute Mode    Enabled
      Channel Mode      2ch

echo "multi_io = no" 
 >/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/hints
echo "1" 
 >/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/reconfigure

http://www.alsa-project.org/db/?f=8494525c7988dc528a45cc1e45134666f3793d7a

   < Master >
   Headphone
   Speaker
   Mic
   Mic Boost
   Mic 1
   Mic Boost 1
   Beep
   Auto-Mute Mode    Enabled

AT THIS POINT IT WORKED !

But not automatically though ?!
I have to manually put in the hint.

Tormen.

>
>> [10263.778038] ALSA patch_realtek.c:466 realtek: No valid SSID, checking
>> pincfg 0x411111f0 for NID 0x1d
>> [10263.780832] ALSA patch_realtek.c:549 realtek: Enable default setup
>> for auto mode as fallback
>> [10263.783693] Tormen: parse_user_hints: val (from 'multi_io') == '-2'
>> [10263.786078] Tormen: fill_and_eval_dacs: 111 spec->no_multi_io == '0'
>> [10263.787634] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10263.789531] Tormen: fill_and_eval_dacs: DDD
>> [10263.790957] Tormen: fill_and_eval_dacs: 111 spec->no_multi_io == '0'
>> [10263.792364] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10263.793749] Tormen: fill_and_eval_dacs: DDD
>> [10263.795150] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10263.796546] Tormen: fill_and_eval_dacs: DDD
>> [10263.797932] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10263.799363] Tormen: fill_and_eval_dacs: DDD
>> [10263.800759] Tormen: fill_and_eval_dacs: 111 spec->no_multi_io == '0'
>> [10263.802161] Tormen: fill_and_eval_dacs: AAA
>> [10263.804110] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10263.805609] Tormen: fill_and_eval_dacs: BBB
>> [10263.807265] Tormen: fill_and_eval_dacs: CCC
>> [10263.810445] input: HDA Digital PCBeep as
>> /devices/pci0000:00/0000:00:1b.0/input/input25
>> [10263.812063] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10263.818856] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10263.820812] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10263.822315] input: HDA Intel MID Mic as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input26
>> [10263.823905] input: HDA Intel MID Mic as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input27
>> [10263.825607] input: HDA Intel MID Headphone as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input28
>>
>> THEN with manual set multi_io = yes:
> No, you need to set multi_io=no, as mentioned.
>
>
> Takashi
>
>> echo "multi_io = yes"
>>   >/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/hints
>> echo "1" >/sys/devices/pci0000:00/0000:00:1b.0/sound/card0/hwC0D0/reconfig
>>
>> [10462.452100] ALSA hda_hwdep.c:221 hda-codec: reconfiguring
>> [10462.614742] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10462.618508] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10462.620912] Tormen: alc882_fixup_no_primary_hp: BBB ==> set
>> spec->no_multi_io = 1
>> [10462.623365] hda_codec: ALC889: SKU not ready 0x411111f0
>> [10462.626209] ALSA hda_auto_parser.c:335 autoconfig: line_outs=1
>> (0x14/0x0/0x0/0x0/0x0) type:speaker
>> [10462.628736] ALSA hda_auto_parser.c:339    speaker_outs=0
>> (0x0/0x0/0x0/0x0/0x0)
>> [10462.631345] ALSA hda_auto_parser.c:343    hp_outs=1
>> (0x15/0x0/0x0/0x0/0x0)
>> [10462.633911] ALSA hda_auto_parser.c:344    mono: mono_out=0x0
>> [10462.636543] ALSA hda_auto_parser.c:348    inputs:
>> [10462.639122] ALSA hda_auto_parser.c:352      Mic=0x18
>> [10462.640323] ALSA hda_auto_parser.c:352      Mic=0x19
>> [10462.641419] ALSA hda_auto_parser.c:352      Internal Mic=0x12
>> [10462.642554] ALSA patch_realtek.c:466 realtek: No valid SSID, checking
>> pincfg 0x411111f0 for NID 0x1d
>> [10462.643700] ALSA patch_realtek.c:549 realtek: Enable default setup
>> for auto mode as fallback
>> [10462.644841] Tormen: parse_user_hints: val (from 'multi_io') == '1'
>> [10462.645988] Tormen: parse_user_hints: spec->no_multi_io == '1'
>> [10462.647186] Tormen: fill_and_eval_dacs: 111 spec->no_multi_io == '0'
>> [10462.648520] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10462.649847] Tormen: fill_and_eval_dacs: DDD
>> [10462.651038] Tormen: fill_and_eval_dacs: 111 spec->no_multi_io == '0'
>> [10462.652201] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10462.653352] Tormen: fill_and_eval_dacs: DDD
>> [10462.654522] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10462.655673] Tormen: fill_and_eval_dacs: DDD
>> [10462.656804] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10462.657944] Tormen: fill_and_eval_dacs: DDD
>> [10462.659122] Tormen: fill_and_eval_dacs: 111 spec->no_multi_io == '0'
>> [10462.660266] Tormen: fill_and_eval_dacs: AAA
>> [10462.661392] Tormen: fill_and_eval_dacs: 222 spec->no_multi_io == '0'
>> [10462.662576] Tormen: fill_and_eval_dacs: BBB
>> [10462.664050] Tormen: fill_and_eval_dacs: CCC
>> [10462.665700] input: HDA Digital PCBeep as
>> /devices/pci0000:00/0000:00:1b.0/input/input29
>> [10462.667026] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10462.673168] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10462.674864] Tormen: alc882_fixup_no_primary_hp: AAA
>> [10462.675957] input: HDA Intel MID Mic as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
>> [10462.677133] input: HDA Intel MID Mic as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
>> [10462.678328] input: HDA Intel MID Headphone as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
>>
>>
>> Tormen

More information about the Alsa-devel mailing list