[alsa-devel] [PATCH] ASoC: Jack: add configurable option for irq_flag
Omair Mohammed Abdullah
omair.m.abdullah at linux.intel.com
Tue Feb 12 06:37:02 CET 2013
From: Vaibhav Agarwal <vaibhav.agarwal at intel.com>
For a jack using GPIO based detection, the framework sets it to trigger on both
edges (rising and falling). Some codecs may provide only a falling or rising edge
interrupt but not both.
This patch provides a configurable option for irq_flag during
snd_soc_jack_add_gpios(). If not configured, it sets the interrupt line to
trigger on both edges.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal at intel.com>
Signed-off-by: Omair Mohammed Abdullah <omair.m.abdullah at linux.intel.com>
---
include/sound/soc.h | 2 ++
sound/soc/soc-jack.c | 7 +++++--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/include/sound/soc.h b/include/sound/soc.h
index a6a059c..d0286ad 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -585,6 +585,7 @@ struct snd_soc_jack_zone {
* @report: value to report when jack detected
* @invert: report presence in low state
* @debouce_time: debouce time in ms
+ * @irq_flag: Interrupt flags for GPIO-Irq line
* @wake: enable as wake source
* @jack_status_check: callback function which overrides the detection
* to provide more complex checks (eg, reading an
@@ -597,6 +598,7 @@ struct snd_soc_jack_gpio {
int report;
int invert;
int debounce_time;
+ unsigned long irq_flags;
bool wake;
struct snd_soc_jack *jack;
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index 0bb5ccc..c9f7953 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -318,10 +318,13 @@ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
INIT_DELAYED_WORK(&gpios[i].work, gpio_work);
gpios[i].jack = jack;
+ if (!gpios[i].irq_flags)
+ gpios[i].irq_flags =
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
+
ret = request_any_context_irq(gpio_to_irq(gpios[i].gpio),
gpio_handler,
- IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
+ gpios[i].irq_flags,
gpios[i].name,
&gpios[i]);
if (ret < 0)
--
1.7.4.1
More information about the Alsa-devel
mailing list