[alsa-devel] [PATCH 04/10] ASoC: rsnd: make sure variable name for 44.1kHz/48kHz

Kuninori Morimoto kuninori.morimoto.gx at gmail.com
Fri Dec 20 04:27:19 CET 2013


From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>

This driver is assuming that
RBGA is used as source clock of 44.1kHz category, and
RBGB is used as source clock of 48kHz category.
This patch clarifies the variable name.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
---
 sound/soc/sh/rcar/adg.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c
index 55d0394..2e71a7b 100644
--- a/sound/soc/sh/rcar/adg.c
+++ b/sound/soc/sh/rcar/adg.c
@@ -19,8 +19,8 @@
 struct rsnd_adg {
 	struct clk *clk[CLKMAX];
 
-	int rate_of_441khz_div_6;
-	int rate_of_48khz_div_6;
+	int rbga_rate_for_441khz_div_6;	/* RBGA */
+	int rbgb_rate_for_48khz_div_6;	/* RBGB */
 	u32 ckr;
 };
 
@@ -101,12 +101,12 @@ int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *mod, unsigned int rate)
 	/*
 	 * find 1/6 clock from BRGA/BRGB
 	 */
-	if (rate == adg->rate_of_441khz_div_6) {
+	if (rate == adg->rbga_rate_for_441khz_div_6) {
 		data = 0x10;
 		goto found_clock;
 	}
 
-	if (rate == adg->rate_of_48khz_div_6) {
+	if (rate == adg->rbgb_rate_for_48khz_div_6) {
 		data = 0x20;
 		goto found_clock;
 	}
@@ -156,8 +156,8 @@ static void rsnd_adg_ssi_clk_init(struct rsnd_priv *priv, struct rsnd_adg *adg)
 	 *	rsnd_adg_ssi_clk_try_start()
 	 */
 	ckr = 0;
-	adg->rate_of_441khz_div_6 = 0;
-	adg->rate_of_48khz_div_6  = 0;
+	adg->rbga_rate_for_441khz_div_6 = 0;
+	adg->rbgb_rate_for_48khz_div_6  = 0;
 	for_each_rsnd_clk(clk, adg, i) {
 		rate = clk_get_rate(clk);
 
@@ -165,14 +165,14 @@ static void rsnd_adg_ssi_clk_init(struct rsnd_priv *priv, struct rsnd_adg *adg)
 			continue;
 
 		/* RBGA */
-		if (!adg->rate_of_441khz_div_6 && (0 == rate % 44100)) {
-			adg->rate_of_441khz_div_6 = rate / 6;
+		if (!adg->rbga_rate_for_441khz_div_6 && (0 == rate % 44100)) {
+			adg->rbga_rate_for_441khz_div_6 = rate / 6;
 			ckr |= brg_table[i] << 20;
 		}
 
 		/* RBGB */
-		if (!adg->rate_of_48khz_div_6 && (0 == rate % 48000)) {
-			adg->rate_of_48khz_div_6 = rate / 6;
+		if (!adg->rbgb_rate_for_48khz_div_6 && (0 == rate % 48000)) {
+			adg->rbgb_rate_for_48khz_div_6 = rate / 6;
 			ckr |= brg_table[i] << 16;
 		}
 	}
-- 
1.7.9.5



More information about the Alsa-devel mailing list