[alsa-devel] [pulseaudio-discuss] Issue with multiple hdmi codecs in radeonhd, hacked to work
John Ettedgui
john.ettedgui at gmail.com
Sun Dec 8 09:21:54 CET 2013
and same logs but with -with-debug=detect instead of full.
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-1-mainline (root at HTPC) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Sat Dec 7 16:17:38 PST 2013
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=/dev/sdc3 rw rootfstype=btrfs raid=noautodetect intel_iommu=on radeon.audio=1 radeon.dpm=1 quiet add_efi_memmap clocksource=hpet hpet=enable splash
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df7dffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df7e0000-0x00000000df7e1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000df7e2000-0x00000000df7effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000df7f0000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P55-UD3R/P55-UD3R, BIOS F8 06/23/2010
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x420000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask F00000000 write-back
[ 0.000000] 3 base 200000000 mask E00000000 write-back
[ 0.000000] 4 base 300000000 mask F00000000 write-back
[ 0.000000] 5 base 400000000 mask FE0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf7e0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f57d0-0x000f57df] mapped at [ffff8800000f57d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3c000, 0x01b3cfff] PGTABLE
[ 0.000000] BRK [0x01b3d000, 0x01b3dfff] PGTABLE
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41fe00000-0x41fffffff]
[ 0.000000] [mem 0x41fe00000-0x41fffffff] page 2M
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41c000000-0x41fdfffff]
[ 0.000000] [mem 0x41c000000-0x41fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41bffffff]
[ 0.000000] [mem 0x400000000-0x41bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdf7dffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdf5fffff] page 2M
[ 0.000000] [mem 0xdf600000-0xdf7dffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37500000-0x37a77fff]
[ 0.000000] ACPI: RSDP 00000000000f7190 000014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000df7e2040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000df7e20c0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000df7e2180 006278 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000df7e0000 000040
[ 0.000000] ACPI: HPET 00000000df7e8540 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000df7e85c0 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: EUDS 00000000df7e8600 000560 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000df7e8b60 000A32 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000df7e8440 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000df7e95c0 001778 (v01 INTEL PPM RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41fffffff]
[ 0.000000] NODE_DATA [mem 0x41ffed000-0x41fff1fff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040f600000-ffff88041f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xdf7dffff]
[ 0.000000] node 0: [mem 0x100000000-0x41fffffff]
[ 0.000000] On node 0 totalpages: 4192124
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14240 pages used for memmap
[ 0.000000] DMA32 zone: 911328 pages, LIFO batch:31
[ 0.000000] Normal zone: 51200 pages used for memmap
[ 0.000000] Normal zone: 3276800 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf7e0000-0xdf7e1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf7e2000-0xdf7effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf7f0000-0xdf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf3ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88041fc00000 s86272 r8192 d24320 u262144
[ 0.000000] pcpu-alloc: s86272 r8192 d24320 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4126599
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-mainline root=/dev/sdc3 rw rootfstype=btrfs raid=noautodetect intel_iommu=on radeon.audio=1 radeon.dpm=1 quiet add_efi_memmap clocksource=hpet hpet=enable splash
[ 0.000000] Intel-IOMMU: enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16421832K/16768496K available (5151K kernel code, 815K rwdata, 1728K rodata, 1160K init, 1304K bss, 346664K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:8448 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2719.974 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5442.61 BogoMIPS (lpj=9066580)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000029] Security Framework initialized
[ 0.000036] AppArmor: AppArmor disabled by boot time parameter
[ 0.000037] Yama: becoming mindful.
[ 0.001005] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003915] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005473] Mount-cache hash table entries: 256
[ 0.005637] Initializing cgroup subsys memory
[ 0.005642] Initializing cgroup subsys devices
[ 0.005644] Initializing cgroup subsys freezer
[ 0.005645] Initializing cgroup subsys net_cls
[ 0.005646] Initializing cgroup subsys blkio
[ 0.005663] CPU: Physical Processor ID: 0
[ 0.005664] CPU: Processor Core ID: 0
[ 0.005668] mce: CPU supports 9 MCE banks
[ 0.005676] CPU0: Thermal monitoring enabled (TM1)
[ 0.005683] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
[ 0.005748] Freeing SMP alternatives memory: 20K (ffffffff819ef000 - ffffffff819f4000)
[ 0.006642] ACPI: Core revision 20131115
[ 0.008789] ACPI: All ACPI Tables successfully acquired
[ 0.011227] ftrace: allocating 20458 entries in 80 pages
[ 0.020382] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053344] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
[ 0.157891] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[ 0.157895] perf_event_intel: CPU erratum AAJ80 worked around
[ 0.157897] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.157898] ... version: 3
[ 0.157899] ... bit width: 48
[ 0.157900] ... generic registers: 4
[ 0.157901] ... value mask: 0000ffffffffffff
[ 0.157902] ... max period: 000000007fffffff
[ 0.157903] ... fixed-purpose events: 3
[ 0.157903] ... event mask: 000000070000000f
[ 0.184594] x86: Booting SMP configuration:
[ 0.197894] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.184596] .... node #0, CPUs: #1 #2 #3
[ 0.233312] x86: Booted up 1 node, 4 CPUs
[ 0.233316] smpboot: Total of 4 processors activated (21768.45 BogoMIPS)
[ 0.235771] devtmpfs: initialized
[ 0.238920] PM: Registering ACPI NVS region [mem 0xdf7e0000-0xdf7e1fff] (8192 bytes)
[ 0.239721] RTC time: 8:19:12, date: 12/08/13
[ 0.239752] NET: Registered protocol family 16
[ 0.239852] cpuidle: using governor ladder
[ 0.239853] cpuidle: using governor menu
[ 0.239880] ACPI: bus type PCI registered
[ 0.239881] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.239935] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
[ 0.239937] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
[ 0.243201] PCI: Using configuration type 1 for base access
[ 0.243831] bio: create slab <bio-0> at 0
[ 0.243916] ACPI: Added _OSI(Module Device)
[ 0.243917] ACPI: Added _OSI(Processor Device)
[ 0.243919] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.243920] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.247144] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x7E, should be 0x7D (20131115/tbprint-214)
[ 0.247618] ACPI: Interpreter enabled
[ 0.247622] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.247626] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.247636] ACPI: (supports S0 S3 S4 S5)
[ 0.247637] ACPI: Using IOAPIC for interrupt routing
[ 0.247653] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.247747] ACPI: No dock devices found.
[ 0.252123] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.252128] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.252134] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.252327] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5)
[ 0.252329] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5)
[ 0.252331] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5)
[ 0.252333] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5)
[ 0.252334] ACPI: \_SB_.PCI0.LNKE: can't evaluate _ADR (0x5)
[ 0.252336] ACPI: \_SB_.PCI0.LNKF: can't evaluate _ADR (0x5)
[ 0.252337] ACPI: \_SB_.PCI0.LNK0: can't evaluate _ADR (0x5)
[ 0.252339] ACPI: \_SB_.PCI0.LNK1: can't evaluate _ADR (0x5)
[ 0.252341] ACPI: \_SB_.PCI0.EXPL: can't evaluate _ADR (0x5)
[ 0.252342] PCI host bridge to bus 0000:00
[ 0.252344] pci_bus 0000:00: root bus resource [bus 00-3f]
[ 0.252346] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.252347] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.252349] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.252350] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.252352] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfebfffff]
[ 0.252360] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[ 0.252447] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400
[ 0.252489] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.252552] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[ 0.252634] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[ 0.252716] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[ 0.252796] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[ 0.252873] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[ 0.252944] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[ 0.253030] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300
[ 0.253068] pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
[ 0.253136] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.253166] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300
[ 0.253204] pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
[ 0.253271] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.253299] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300
[ 0.253337] pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
[ 0.253404] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.253440] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320
[ 0.253459] pci 0000:00:1a.7: reg 0x10: [mem 0xfbfff000-0xfbfff3ff]
[ 0.253539] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.253581] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.253611] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.253671] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.253714] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.253743] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.253803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.253845] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.253875] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[ 0.253936] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.253978] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.254010] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300
[ 0.254047] pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
[ 0.254114] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.254145] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300
[ 0.254182] pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
[ 0.254249] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.254280] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300
[ 0.254317] pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
[ 0.254384] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.254412] pci 0000:00:1d.3: [8086:3b39] type 00 class 0x0c0300
[ 0.254449] pci 0000:00:1d.3: reg 0x20: [io 0xf900-0xf91f]
[ 0.254520] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.254556] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320
[ 0.254575] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.254655] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.254697] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.254724] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.254800] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.254831] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[ 0.254987] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[ 0.255003] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807]
[ 0.255010] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703]
[ 0.255017] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607]
[ 0.255024] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503]
[ 0.255031] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf41f]
[ 0.255038] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffd000-0xfbffd7ff]
[ 0.255078] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.255141] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.255155] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
[ 0.255173] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
[ 0.255278] pci 0000:01:00.0: [1002:6818] type 00 class 0x030000
[ 0.255290] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.255298] pci 0000:01:00.0: reg 0x18: [mem 0xfbc80000-0xfbcbffff 64bit]
[ 0.255305] pci 0000:01:00.0: reg 0x20: [io 0xce00-0xceff]
[ 0.255315] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.255348] pci 0000:01:00.0: supports D1 D2
[ 0.255349] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.255395] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.255406] pci 0000:01:00.1: reg 0x10: [mem 0xfbcfc000-0xfbcfffff 64bit]
[ 0.255460] pci 0000:01:00.1: supports D1 D2
[ 0.261128] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.261133] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.261138] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.261144] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.261236] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[ 0.261319] pci 0000:02:00.0: reg 0x24: [mem 0xfbafe000-0xfbafffff]
[ 0.261379] pci 0000:02:00.0: PME# supported from D3hot
[ 0.261434] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[ 0.261454] pci 0000:02:00.1: reg 0x10: [io 0xbf00-0xbf07]
[ 0.261463] pci 0000:02:00.1: reg 0x14: [io 0xbe00-0xbe03]
[ 0.261473] pci 0000:02:00.1: reg 0x18: [io 0xbd00-0xbd07]
[ 0.261482] pci 0000:02:00.1: reg 0x1c: [io 0xbc00-0xbc03]
[ 0.261492] pci 0000:02:00.1: reg 0x20: [io 0xbb00-0xbb0f]
[ 0.261585] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.261594] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.261597] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.261600] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.261663] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.261679] pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff]
[ 0.261705] pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref]
[ 0.261722] pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref]
[ 0.261733] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.261793] pci 0000:03:00.0: supports D1 D2
[ 0.261795] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.267792] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.267798] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.267803] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.267810] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[ 0.267899] pci 0000:04:00.0: [197b:2363] type 00 class 0x010185
[ 0.267982] pci 0000:04:00.0: reg 0x24: [mem 0xfbdfe000-0xfbdfffff]
[ 0.268042] pci 0000:04:00.0: PME# supported from D3hot
[ 0.268098] pci 0000:04:00.1: [197b:2363] type 00 class 0x010185
[ 0.268118] pci 0000:04:00.1: reg 0x10: [io 0xdf00-0xdf07]
[ 0.268128] pci 0000:04:00.1: reg 0x14: [io 0xde00-0xde03]
[ 0.268138] pci 0000:04:00.1: reg 0x18: [io 0xdd00-0xdd07]
[ 0.268147] pci 0000:04:00.1: reg 0x1c: [io 0xdc00-0xdc03]
[ 0.268157] pci 0000:04:00.1: reg 0x20: [io 0xdb00-0xdb0f]
[ 0.268250] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.268258] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.268261] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.268265] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.268310] pci 0000:05:05.0: [168c:0023] type 00 class 0x028000
[ 0.268328] pci 0000:05:05.0: reg 0x10: [mem 0xfbbf0000-0xfbbfffff]
[ 0.268459] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.268464] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.268469] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.268471] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.268472] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.268474] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.268475] pci 0000:00:1e.0: bridge window [mem 0xdf800000-0xfebfffff] (subtractive decode)
[ 0.268940] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.268985] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.269029] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.269073] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.269116] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.269161] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.269204] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.269248] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.269320] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.269352] Found 1 acpi root devices
[ 0.269411] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.269413] vgaarb: loaded
[ 0.269414] vgaarb: bridge control possible 0000:01:00.0
[ 0.269439] PCI: Using ACPI for IRQ routing
[ 0.270701] PCI: Discovered peer bus 3f
[ 0.270702] PCI: root bus 3f: using default resources
[ 0.270703] PCI: Probing PCI hardware (bus 3f)
[ 0.270721] PCI host bridge to bus 0000:3f
[ 0.270723] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
[ 0.270725] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.270726] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[ 0.270729] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f])
[ 0.270733] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[ 0.270767] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[ 0.270800] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[ 0.270833] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[ 0.270866] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[ 0.270897] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[ 0.270929] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[ 0.270959] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[ 0.270989] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[ 0.271022] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[ 0.271052] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[ 0.271084] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[ 0.271118] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[ 0.271149] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[ 0.271180] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[ 0.271220] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[ 0.271224] PCI: pci_cache_line_size set to 64 bytes
[ 0.271300] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.271301] e820: reserve RAM buffer [mem 0xdf7e0000-0xdfffffff]
[ 0.271369] NetLabel: Initializing
[ 0.271370] NetLabel: domain hash size = 128
[ 0.271371] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.271381] NetLabel: unlabeled traffic allowed by default
[ 0.271427] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[ 0.271433] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[ 0.271438] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.273469] hpet: hpet2 irq 40 for MSI
[ 0.273505] hpet: hpet3 irq 41 for MSI
[ 0.273543] hpet: hpet4 irq 42 for MSI
[ 0.273583] hpet: hpet5 irq 43 for MSI
[ 0.273605] Switched to clocksource hpet
[ 0.277141] pnp: PnP ACPI init
[ 0.277153] ACPI: bus type PNP registered
[ 0.277282] system 00:00: [io 0x04d0-0x04d1] has been reserved
[ 0.277285] system 00:00: [io 0x0290-0x029f] has been reserved
[ 0.277286] system 00:00: [io 0x0800-0x087f] has been reserved
[ 0.277288] system 00:00: [io 0x0290-0x0294] has been reserved
[ 0.277290] system 00:00: [io 0x0880-0x088f] has been reserved
[ 0.277293] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.277302] pnp 00:01: [dma 4]
[ 0.277318] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.277372] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.277406] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.277425] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.277449] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.277659] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.277823] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.277932] system 00:08: [io 0x0400-0x047f] could not be reserved
[ 0.277934] system 00:08: [io 0x0580-0x05ff] has been reserved
[ 0.277936] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278092] system 00:09: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.278095] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.278230] system 00:0a: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.278232] system 00:0a: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.278234] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.278236] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.278238] system 00:0a: [mem 0xdf7e0000-0xdf7effff] could not be reserved
[ 0.278240] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.278242] system 00:0a: [mem 0x00100000-0xdf7dffff] could not be reserved
[ 0.278243] system 00:0a: [mem 0xdf7f0000-0xdf7fffff] has been reserved
[ 0.278245] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.278247] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.278249] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.278251] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.278252] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.278254] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.278256] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
[ 0.278258] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.278288] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.278292] pnp: PnP ACPI: found 12 devices
[ 0.278293] ACPI: bus type PNP unregistered
[ 0.284615] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.284628] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.284639] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.284641] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.284644] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf800000-0xdf9fffff 64bit pref]
[ 0.284646] pci 0000:00:1c.3: BAR 15: assigned [mem 0xdfa00000-0xdfbfffff 64bit pref]
[ 0.284649] pci 0000:01:00.0: BAR 6: assigned [mem 0xfbc00000-0xfbc1ffff pref]
[ 0.284651] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.284653] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.284656] pci 0000:00:03.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.284659] pci 0000:00:03.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.284663] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.284665] pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
[ 0.284669] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.284672] pci 0000:00:1c.0: bridge window [mem 0xdf800000-0xdf9fffff 64bit pref]
[ 0.284677] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbe00000-0xfbe1ffff pref]
[ 0.284679] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.284681] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.284685] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.284688] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref]
[ 0.284693] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.284695] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.284699] pci 0000:00:1c.3: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.284702] pci 0000:00:1c.3: bridge window [mem 0xdfa00000-0xdfbfffff 64bit pref]
[ 0.284706] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.284710] pci 0000:00:1e.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.284717] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.284718] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.284720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.284722] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.284723] pci_bus 0000:00: resource 8 [mem 0xdf800000-0xfebfffff]
[ 0.284725] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.284726] pci_bus 0000:01: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.284728] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.284729] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.284731] pci_bus 0000:02: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.284733] pci_bus 0000:02: resource 2 [mem 0xdf800000-0xdf9fffff 64bit pref]
[ 0.284734] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.284736] pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff]
[ 0.284737] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref]
[ 0.284739] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.284740] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.284742] pci_bus 0000:04: resource 2 [mem 0xdfa00000-0xdfbfffff 64bit pref]
[ 0.284743] pci_bus 0000:05: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.284745] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.284747] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.284748] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.284750] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.284751] pci_bus 0000:05: resource 8 [mem 0xdf800000-0xfebfffff]
[ 0.284754] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
[ 0.284755] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.284779] NET: Registered protocol family 2
[ 0.284936] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.285285] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.285559] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.285578] TCP: reno registered
[ 0.285594] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.285706] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.285854] NET: Registered protocol family 1
[ 0.310340] pci 0000:01:00.0: Boot video device
[ 0.310372] PCI: CLS 64 bytes, default 64
[ 0.310409] Unpacking initramfs...
[ 0.330560] Freeing initrd memory: 5600K (ffff880037500000 - ffff880037a78000)
[ 0.330563] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.330565] software IO TLB [mem 0xdb7e0000-0xdf7e0000] (64MB) mapped at [ffff8800db7e0000-ffff8800df7dffff]
[ 0.330727] Scanning for low memory corruption every 60 seconds
[ 0.330973] audit: initializing netlink socket (disabled)
[ 0.330982] type=2000 audit(1386490752.226:1): initialized
[ 0.341594] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.342883] zbud: loaded
[ 0.343030] VFS: Disk quotas dquot_6.5.2
[ 0.343063] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.343196] msgmni has been set to 32084
[ 0.343445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.343484] io scheduler noop registered
[ 0.343485] io scheduler deadline registered
[ 0.343507] io scheduler cfq registered (default)
[ 0.343999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.344010] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.344046] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.344047] vesafb: scrolling: redraw
[ 0.344048] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.344473] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005b00000, using 8128k, total 8128k
[ 0.574887] Console: switching to colour frame buffer device 240x67
[ 0.804391] fb0: VESA VGA frame buffer device
[ 0.804401] intel_idle: MWAIT substates: 0x1120
[ 0.804407] intel_idle: v0.4 model 0x1E
[ 0.804408] intel_idle: lapic_timer_reliable_states 0x2
[ 0.804509] GHES: HEST is not enabled!
[ 0.804555] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.825073] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.825507] Linux agpgart interface v0.103
[ 0.825566] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.858010] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.858011] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.105988] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.106271] mousedev: PS/2 mouse device common for all mice
[ 1.106328] rtc_cmos 00:03: RTC can wake from S4
[ 1.106529] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.106554] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.106608] drop_monitor: Initializing network drop monitor service
[ 1.106653] TCP: cubic registered
[ 1.106725] NET: Registered protocol family 10
[ 1.106855] NET: Registered protocol family 17
[ 1.106862] Key type dns_resolver registered
[ 1.107303] registered taskstats version 1
[ 1.108103] Magic number: 9:754:320
[ 1.108110] tty tty45: hash matches
[ 1.108219] rtc_cmos 00:03: setting system clock to 2013-12-08 08:19:13 UTC (1386490753)
[ 1.108239] PM: Hibernation image not present or could not be loaded.
[ 1.109098] Freeing unused kernel memory: 1160K (ffffffff818cd000 - ffffffff819ef000)
[ 1.109099] Write protecting the kernel read-only data: 8192k
[ 1.111379] Freeing unused kernel memory: 980K (ffff88000150b000 - ffff880001600000)
[ 1.112177] Freeing unused kernel memory: 320K (ffff8800017b0000 - ffff880001800000)
[ 1.119523] systemd-udevd[59]: starting version 208
[ 1.175915] raid6: sse2x1 6649 MB/s
[ 1.232411] raid6: sse2x2 7914 MB/s
[ 1.289005] raid6: sse2x4 8816 MB/s
[ 1.289006] raid6: using algorithm sse2x4 (8816 MB/s)
[ 1.289007] raid6: using ssse3x2 recovery algorithm
[ 1.289110] xor: measuring software checksum speed
[ 1.322297] prefetch64-sse: 11236.800 MB/sec
[ 1.332336] tsc: Refined TSC clocksource calibration: 2719.999 MHz
[ 1.355588] generic_sse: 9896.400 MB/sec
[ 1.355589] xor: using function: prefetch64-sse (11236.800 MB/sec)
[ 1.358233] bio: create slab <bio-1> at 1
[ 1.358928] Btrfs loaded
[ 1.383646] ACPI: bus type USB registered
[ 1.383666] usbcore: registered new interface driver usbfs
[ 1.383674] usbcore: registered new interface driver hub
[ 1.384059] usbcore: registered new device driver usb
[ 1.384372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.384557] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.384676] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.384682] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.384714] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 1.384890] hub 1-0:1.0: USB hub found
[ 1.384897] hub 1-0:1.0: 2 ports detected
[ 1.385252] ehci-pci: EHCI PCI platform driver
[ 1.385386] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.385391] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.385419] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 1.385574] hub 2-0:1.0: USB hub found
[ 1.385581] hub 2-0:1.0: 2 ports detected
[ 1.385725] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.385730] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 1.385759] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00
[ 1.385894] hub 3-0:1.0: USB hub found
[ 1.385899] hub 3-0:1.0: 2 ports detected
[ 1.387203] SCSI subsystem initialized
[ 1.388424] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.388430] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.388460] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 1.388648] hub 4-0:1.0: USB hub found
[ 1.388655] hub 4-0:1.0: 2 ports detected
[ 1.388815] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.388820] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.388848] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 1.389004] hub 5-0:1.0: USB hub found
[ 1.389009] hub 5-0:1.0: 2 ports detected
[ 1.389159] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.389164] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.389184] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 1.389248] libata version 3.00 loaded.
[ 1.390184] hub 6-0:1.0: USB hub found
[ 1.390190] hub 6-0:1.0: 2 ports detected
[ 1.390343] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.390349] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 1.390370] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900
[ 1.390477] hub 7-0:1.0: USB hub found
[ 1.390483] hub 7-0:1.0: 2 ports detected
[ 1.390778] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[ 1.391558] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.391568] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 8
[ 1.391579] ehci-pci 0000:00:1a.7: debug port 2
[ 1.395486] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.395492] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbfff000
[ 1.395693] scsi0 : pata_jmicron
[ 1.396073] scsi1 : pata_jmicron
[ 1.396107] ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
[ 1.396108] ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
[ 1.396122] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001)
[ 1.397759] scsi2 : pata_jmicron
[ 1.397946] scsi3 : pata_jmicron
[ 1.398101] ata3: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 16
[ 1.398103] ata4: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 16
[ 1.402268] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.402551] hub 8-0:1.0: USB hub found
[ 1.402558] hub 8-0:1.0: 6 ports detected
[ 1.425656] hub 1-0:1.0: USB hub found
[ 1.425662] hub 1-0:1.0: 2 ports detected
[ 1.449004] hub 2-0:1.0: USB hub found
[ 1.449010] hub 2-0:1.0: 2 ports detected
[ 1.472255] hub 3-0:1.0: USB hub found
[ 1.472262] hub 3-0:1.0: 2 ports detected
[ 1.472825] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.472875] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
[ 1.472886] ehci-pci 0000:00:1d.7: debug port 2
[ 1.476814] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.476819] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffe000
[ 1.485528] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.485863] hub 9-0:1.0: USB hub found
[ 1.485874] hub 9-0:1.0: 8 ports detected
[ 1.508912] hub 4-0:1.0: USB hub found
[ 1.508918] hub 4-0:1.0: 2 ports detected
[ 1.532184] hub 5-0:1.0: USB hub found
[ 1.532195] hub 5-0:1.0: 2 ports detected
[ 1.555503] hub 6-0:1.0: USB hub found
[ 1.555510] hub 6-0:1.0: 2 ports detected
[ 1.578802] hub 7-0:1.0: USB hub found
[ 1.578813] hub 7-0:1.0: 2 ports detected
[ 1.578938] ahci 0000:00:1f.2: version 3.0
[ 1.579041] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 1.579068] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.592082] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.592089] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
[ 1.625890] scsi4 : ahci
[ 1.626067] scsi5 : ahci
[ 1.626250] scsi6 : ahci
[ 1.626471] scsi7 : ahci
[ 1.626651] scsi8 : ahci
[ 1.626818] scsi9 : ahci
[ 1.626886] ata5: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd100 irq 45
[ 1.626892] ata6: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd180 irq 45
[ 1.626893] ata7: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd200 irq 45
[ 1.626895] ata8: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd280 irq 45
[ 1.626897] ata9: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd300 irq 45
[ 1.626899] ata10: SATA max UDMA/133 abar m2048 at 0xfbffd000 port 0xfbffd380 irq 45
[ 1.638639] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.638644] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.638957] scsi10 : ahci
[ 1.639223] scsi11 : ahci
[ 1.639303] ata11: SATA max UDMA/133 abar m8192 at 0xfbafe000 port 0xfbafe100 irq 16
[ 1.639308] ata12: SATA max UDMA/133 abar m8192 at 0xfbafe000 port 0xfbafe180 irq 16
[ 1.652010] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.652016] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.652437] scsi12 : ahci
[ 1.652662] scsi13 : ahci
[ 1.652741] ata13: SATA max UDMA/133 abar m8192 at 0xfbdfe000 port 0xfbdfe100 irq 19
[ 1.652746] ata14: SATA max UDMA/133 abar m8192 at 0xfbdfe000 port 0xfbdfe180 irq 19
[ 1.958281] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.958322] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.971597] ata14: SATA link down (SStatus 0 SControl 300)
[ 1.971638] ata13: SATA link down (SStatus 0 SControl 300)
[ 2.084781] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[ 2.111411] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.112392] ata5.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
[ 2.112396] ata5.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.140549] ata5.00: configured for UDMA/133
[ 2.140717] scsi 4:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
[ 2.262661] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.265499] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 2.265501] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 2.265542] sd 4:0:0:0: [sda] Write Protect is off
[ 2.265544] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.265561] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.268784] usbcore: registered new interface driver usbhid
[ 2.268786] usbhid: USB HID core driver
[ 2.269305] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input1
[ 2.269337] hid-generic 0003:046D:C529.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 2.269557] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.1/input/input2
[ 2.269667] hid-generic 0003:046D:C529.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 2.283281] sda: unknown partition table
[ 2.283447] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.624101] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.625155] ata6.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133
[ 2.625160] ata6.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.626117] ata6.00: configured for UDMA/133
[ 2.626286] scsi 5:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5
[ 2.626430] sd 5:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 2.626432] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[ 2.626472] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.626474] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.626491] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.705974] sdb: sdb1
[ 2.706357] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.815746] random: lvm urandom read with 46 bits of entropy available
[ 2.917070] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 2.943705] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.106190] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-2/input2
[ 3.109077] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/input/input3
[ 3.109233] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:1d.0-2:1
[ 3.111163] input: Logitech Unifying Device. Wireless PID:2012 as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0005/input/input4
[ 3.111313] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2012] on usb-0000:00:1d.0-2:2
[ 3.326558] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 3.429759] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.430127] ata8.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[ 3.430132] ata8.00: 156301488 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.430527] ata8.00: configured for UDMA/133
[ 3.430691] scsi 7:0:0:0: Direct-Access ATA INTEL SSDSA2CW08 4PC1 PQ: 0 ANSI: 5
[ 3.430800] sd 7:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 3.430852] sd 7:0:0:0: [sdc] Write Protect is off
[ 3.430854] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.430869] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.433230] sdc: sdc1 sdc2 sdc3 sdc4
[ 3.433988] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 3.463558] btrfs: device label HOME devid 1 transid 26225 /dev/sdc4
[ 3.464083] btrfs: device label ROOT devid 1 transid 22448 /dev/sdc3
[ 3.749360] ata9: SATA link down (SStatus 0 SControl 300)
[ 4.235419] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.236171] ata10.00: ATA-8: ST33000651AS, CC43, max UDMA/133
[ 4.236176] ata10.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.237065] ata10.00: configured for UDMA/133
[ 4.237165] scsi 9:0:0:0: Direct-Access ATA ST33000651AS CC43 PQ: 0 ANSI: 5
[ 4.237267] sd 9:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 4.237306] sd 9:0:0:0: [sdd] Write Protect is off
[ 4.237308] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.237323] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.276764] sdd: sdd1
[ 4.277133] sd 9:0:0:0: [sdd] Attached SCSI disk
[ 4.404115] device-mapper: uevent: version 1.0.3
[ 4.404211] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel at redhat.com
[ 4.408423] bio: create slab <bio-2> at 2
[ 4.409162] btrfs: device label ROOT devid 1 transid 22448 /dev/sdc3
[ 4.409926] btrfs: disk space caching is enabled
[ 4.409928] btrfs: has skinny extents
[ 4.432613] random: nonblocking pool is initialized
[ 4.433984] Btrfs detected SSD devices, enabling SSD mode
[ 4.571779] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 4.572413] systemd[1]: Set hostname to <HTPC>.
[ 4.635279] systemd[1]: [/usr/lib/systemd/system/pacserve-ports.service:15] Unknown lvalue 'ExecRestart' in section 'Service'
[ 4.635563] systemd[1]: [/usr/lib/systemd/system/lcdd.service:8] Unknown lvalue 'ControlGroup' in section 'Service'
[ 4.636629] systemd[1]: Cannot add dependency job for unit nmbd.service, ignoring: Unit nmbd.service failed to load: No such file or directory.
[ 4.636636] systemd[1]: Cannot add dependency job for unit smbd.service, ignoring: Unit smbd.service failed to load: No such file or directory.
[ 4.636658] systemd[1]: Cannot add dependency job for unit arch-daemons.target, ignoring: Unit arch-daemons.target failed to load: No such file or directory.
[ 4.636673] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 4.636682] systemd[1]: Cannot add dependency job for unit console-kit-daemon.service, ignoring: Unit console-kit-daemon.service failed to load: No such file or directory.
[ 4.637393] systemd[1]: Starting Replay Read-Ahead Data...
[ 4.637768] systemd[1]: Starting Collect Read-Ahead Data...
[ 4.638169] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 4.638210] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.638227] systemd[1]: Starting Remote File Systems.
[ 4.638237] systemd[1]: Reached target Remote File Systems.
[ 4.638247] systemd[1]: Starting Delayed Shutdown Socket.
[ 4.638268] systemd[1]: Listening on Delayed Shutdown Socket.
[ 4.638279] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 4.638300] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 4.638307] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 4.638328] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.638336] systemd[1]: Starting LVM2 metadata daemon socket.
[ 4.638352] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 4.638370] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 4.638395] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.638403] systemd[1]: Starting Encrypted Volumes.
[ 4.638411] systemd[1]: Reached target Encrypted Volumes.
[ 4.638436] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 4.638504] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.638518] systemd[1]: Starting Journal Socket.
[ 4.638555] systemd[1]: Listening on Journal Socket.
[ 4.638576] systemd[1]: Starting Store Sound Card State...
[ 4.638819] systemd[1]: Mounting Debug File System...
[ 4.640517] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 4.640733] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.641116] systemd[1]: Mounting Huge Pages File System...
[ 4.641373] systemd[1]: Starting Journal Service...
[ 4.641641] systemd[1]: Started Journal Service.
[ 4.684693] systemd-journald[178]: Vacuuming done, freed 0 bytes
[ 4.738259] it87: Found IT8720F chip at 0x290, revision 8
[ 4.738268] it87: VID is disabled (pins used for GPIO)
[ 4.738278] it87: Routing internal VCCH to in7
[ 4.738282] it87: Beeping is supported
[ 4.738394] systemd-udevd[211]: starting version 208
[ 4.740603] fuse init (API version 7.22)
[ 4.762950] btrfs: use ssd allocation scheme
[ 4.762954] btrfs: use lzo compression
[ 4.762957] btrfs: enabling auto defrag
[ 4.762958] btrfs: disk space caching is enabled
[ 4.780285] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 4.780290] ACPI: Power Button [PWRB]
[ 4.780337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.780339] ACPI: Power Button [PWRF]
[ 4.784965] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.790342] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.790387] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 4.806123] [drm] Initialized drm 1.1.0 20060810
[ 4.829897] ALSA hda_intel.c:3170 0000:01:00.1: Handle VGA-switcheroo audio client
[ 4.829900] ALSA hda_intel.c:3364 0000:01:00.1: Using LPIB position fix
[ 4.829902] ALSA hda_intel.c:3510 0000:01:00.1: Force to non-snoop mode
[ 4.829934] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 4.829955] ALSA hda_intel.c:3635 0000:01:00.1: chipset global capabilities = 0x0
[ 4.832308] [drm] radeon kernel modesetting enabled.
[ 4.832324] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.832332] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.832511] r8169 0000:03:00.0: irq 47 for MSI/MSI-X
[ 4.832586] ALSA hda_intel.c:1244 0000:01:00.1: codec_mask = 0x1
[ 4.832685] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc9000186c000, 00:24:1d:d9:1a:a7, XID 083000c0 IRQ 47
[ 4.832687] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.832841] ALSA hda_intel.c:1716 0000:01:00.1: codec #0 probed OK
[ 4.832843] ALSA hda_intel.c:1837 0000:01:00.1: Enable sync_write for stable communication
[ 4.837874] ALSA hda_codec.c:4506 Too many HDMI devices
[ 4.837877] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 4.837878] ALSA hda_codec.c:4506 Too many HDMI devices
[ 4.837879] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 4.837881] ALSA hda_codec.c:4506 Too many HDMI devices
[ 4.837882] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 4.837883] ALSA hda_codec.c:4506 Too many HDMI devices
[ 4.837884] ALSA hda_codec.c:4508 Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 4.838066] ALSA patch_hdmi.c:1301 HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 4.838096] ALSA patch_hdmi.c:1301 HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 4.838126] ALSA patch_hdmi.c:1301 HDMI status: Codec=0 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 4.838129] ALSA control.c:352 control 0:0:0:HDMI/DP Jack:0 is already present
[ 4.839954] hda_codec: cannot build controls for #0 (error -16)
[ 4.843376] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[ 4.843378] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 4.843390] Console: switching to colour dummy device 80x25
[ 4.843904] [drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6818 0x1462:0x2740).
[ 4.843927] [drm] register mmio base: 0xFBC80000
[ 4.843928] [drm] register mmio size: 262144
[ 4.844024] ATOM BIOS: 113
[ 4.844092] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 4.844094] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 4.844096] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 4.844097] [drm] RAM width 256bits DDR
[ 4.844167] [TTM] Zone kernel: Available graphics memory: 8214956 kiB
[ 4.844168] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.844169] [TTM] Initializing pool allocator
[ 4.844173] [TTM] Initializing DMA pool allocator
[ 4.844188] [drm] radeon: 2048M of VRAM memory ready
[ 4.844189] [drm] radeon: 1024M of GTT memory ready.
[ 4.846346] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
[ 4.846351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.846370] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.848782] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.848856] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.850426] [drm] probing gen 2 caps for device 8086:d138 = 393d02/0
[ 4.850431] [drm] PCIE gen 2 link speeds already enabled
[ 4.860716] cfg80211: Calling CRDA to update world regulatory domain
[ 4.862042] [drm] Loading PITCAIRN Microcode
[ 4.862430] input: iMON Panel, Knob and Mouse(15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input10
[ 4.870405] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[ 4.870548] radeon 0000:01:00.0: WB enabled
[ 4.870551] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880405185c00
[ 4.870553] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880405185c04
[ 4.870555] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880405185c08
[ 4.870557] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880405185c0c
[ 4.870558] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880405185c10
[ 4.872223] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900064b5a18
[ 4.872226] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.872227] [drm] Driver supports precise vblank timestamp query.
[ 4.872244] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[ 4.872888] radeon 0000:01:00.0: radeon: using MSI.
[ 4.872918] [drm] radeon: irq initialized.
[ 4.879598] EDAC MC: Ver: 3.0.0
[ 4.880378] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[ 4.880409] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[ 4.880413] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 4.885088] input: PC Speaker as /devices/platform/pcspkr/input/input12
[ 4.888111] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.893033] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4
[ 4.893052] platform microcode: Direct firmware load failed with error -2
[ 4.893055] platform microcode: Falling back to user helper
[ 4.894570] Registered IR keymap rc-imon-pad
[ 4.895052] input: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/rc/rc0/input11
[ 4.895142] rc0: iMON Remote (15c2:0038) as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/rc/rc0
[ 4.904558] imon 5-1:1.0: iMON device (15c2:0038, intf0) on usb<5:2> initialized
[ 4.904576] imon 5-1:1.1: iMON device (15c2:0038, intf1) on usb<5:2> initialized
[ 4.904588] usbcore: registered new interface driver imon
[ 4.941513] ppdev: user-space parallel port driver
[ 4.955329] btrfs: device label ROOT devid 1 transid 22449 /dev/sdc3
[ 4.956050] iTCO_vendor_support: vendor-support=0
[ 4.956286] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.956311] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0460)
[ 4.956382] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.956872] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 4.964656] cfg80211: World regulatory domain updated:
[ 4.964659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.964661] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4.964662] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 4.964663] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 4.964664] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 4.964666] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 4.964667] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 4.970869] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4
[ 4.970882] platform microcode: Direct firmware load failed with error -2
[ 4.970883] platform microcode: Falling back to user helper
[ 4.973596] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4
[ 4.973607] platform microcode: Direct firmware load failed with error -2
[ 4.973609] platform microcode: Falling back to user helper
[ 4.974192] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4
[ 4.974204] platform microcode: Direct firmware load failed with error -2
[ 4.974206] platform microcode: Falling back to user helper
[ 4.974277] imon 5-1:1.0: Looks like you're trying to use an IR protocol this device does not support
[ 4.974279] imon 5-1:1.0: Unsupported IR protocol specified, overriding to iMON IR protocol
[ 4.975333] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 4.981488] btrfs: device label HOME devid 1 transid 26225 /dev/sdc4
[ 4.994337] btrfs: device label HOME devid 1 transid 26225 /dev/sdc4
[ 4.995279] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 4.995343] btrfs: use ssd allocation scheme
[ 4.995345] btrfs: use lzo compression
[ 4.995348] btrfs: enabling auto defrag
[ 4.995349] btrfs: disk space caching is enabled
[ 4.995350] btrfs: has skinny extents
[ 5.060677] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: discard
[ 5.127609] [drm] ring test on 0 succeeded in 3 usecs
[ 5.127615] [drm] ring test on 1 succeeded in 1 usecs
[ 5.127620] [drm] ring test on 2 succeeded in 1 usecs
[ 5.127685] [drm] ring test on 3 succeeded in 2 usecs
[ 5.127696] [drm] ring test on 4 succeeded in 1 usecs
[ 5.315186] [drm] ring test on 5 succeeded in 2 usecs
[ 5.315194] [drm] UVD initialized successfully.
[ 5.316222] [drm] Enabling audio 0 support
[ 5.316223] [drm] Enabling audio 1 support
[ 5.316225] [drm] Enabling audio 2 support
[ 5.316226] [drm] Enabling audio 3 support
[ 5.316227] [drm] Enabling audio 4 support
[ 5.316228] [drm] Enabling audio 5 support
[ 5.316293] [drm] ib test on ring 0 succeeded in 0 usecs
[ 5.316350] [drm] ib test on ring 1 succeeded in 0 usecs
[ 5.316436] [drm] ib test on ring 2 succeeded in 0 usecs
[ 5.316469] [drm] ib test on ring 3 succeeded in 0 usecs
[ 5.316502] [drm] ib test on ring 4 succeeded in 1 usecs
[ 5.337806] ath: EEPROM regdomain: 0x809c
[ 5.337808] ath: EEPROM indicates we should expect a country code
[ 5.337809] ath: doing EEPROM country->regdmn map search
[ 5.337810] ath: country maps to regdmn code: 0x52
[ 5.337811] ath: Country alpha2 being used: CN
[ 5.337812] ath: Regpair used: 0x52
[ 5.343970] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.344289] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc90006ba0000, irq=19
[ 5.344488] cfg80211: Calling CRDA for country: CN
[ 5.351585] cfg80211: Regulatory domain changed to country: CN
[ 5.351587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.351589] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 5.351590] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[ 5.351591] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm)
[ 5.351592] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm)
[ 5.351594] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 5.351595] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[ 5.351596] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 5.414326] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,acl,commit=60
[ 5.421664] systemd-journald[178]: Received request to flush runtime journal from PID 1
[ 5.480510] [drm] ib test on ring 5 succeeded
[ 5.481434] [drm] Radeon Display Connectors
[ 5.481437] [drm] Connector 0:
[ 5.481439] [drm] DP-1
[ 5.481440] [drm] HPD4
[ 5.481443] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 5.481445] [drm] Encoders:
[ 5.481446] [drm] DFP1: INTERNAL_UNIPHY2
[ 5.481448] [drm] Connector 1:
[ 5.481450] [drm] DP-2
[ 5.481451] [drm] HPD5
[ 5.481455] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 5.481456] [drm] Encoders:
[ 5.481457] [drm] DFP2: INTERNAL_UNIPHY2
[ 5.481458] [drm] Connector 2:
[ 5.481458] [drm] HDMI-A-1
[ 5.481459] [drm] HPD1
[ 5.481460] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 5.481461] [drm] Encoders:
[ 5.481462] [drm] DFP3: INTERNAL_UNIPHY1
[ 5.481463] [drm] Connector 3:
[ 5.481464] [drm] DVI-I-1
[ 5.481465] [drm] HPD6
[ 5.481466] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 5.481467] [drm] Encoders:
[ 5.481467] [drm] DFP4: INTERNAL_UNIPHY
[ 5.481468] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.481532] [drm] Internal thermal controller with fan control
[ 5.481593] [drm] probing gen 2 caps for device 8086:d138 = 393d02/0
[ 5.481631] == power state 0 ==
[ 5.481633] ui class: none
[ 5.481635] internal class: boot
[ 5.481638] caps:
[ 5.481640] uvd vclk: 0 dclk: 0
[ 5.481643] power level 0 sclk: 15000 mclk: 15000 vddc: 900 vddci: 950 pcie gen: 2
[ 5.481644] status: c r b
[ 5.481647] == power state 1 ==
[ 5.481649] ui class: performance
[ 5.481650] internal class: none
[ 5.481653] caps:
[ 5.481655] uvd vclk: 0 dclk: 0
[ 5.481657] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 5.481660] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 5.481662] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 5.481664] status:
[ 5.481665] == power state 2 ==
[ 5.481667] ui class: none
[ 5.481668] internal class: uvd
[ 5.481671] caps: video
[ 5.481673] uvd vclk: 72000 dclk: 56000
[ 5.481676] power level 0 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 5.481678] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 5.481681] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 5.481682] status:
[ 5.481684] == power state 3 ==
[ 5.481685] ui class: none
[ 5.481687] internal class: ulv
[ 5.481689] caps:
[ 5.481691] uvd vclk: 0 dclk: 0
[ 5.481694] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 5.481696] power level 1 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 5.481698] power level 2 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 5.481700] status:
[ 5.542790] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.758055] r8169 0000:03:00.0 eth0: link down
[ 5.758083] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.766014] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.217504] switching from power state:
[ 6.217508] ui class: none
[ 6.217509] internal class: boot
[ 6.217510] caps:
[ 6.217512] uvd vclk: 0 dclk: 0
[ 6.217513] power level 0 sclk: 15000 mclk: 15000 vddc: 900 vddci: 950 pcie gen: 2
[ 6.217514] status: c b
[ 6.217516] switching to power state:
[ 6.217516] ui class: performance
[ 6.217517] internal class: none
[ 6.217518] caps:
[ 6.217519] uvd vclk: 0 dclk: 0
[ 6.217521] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 6.217522] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 6.217524] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 6.217524] status: r
[ 6.888627] [drm] radeon: dpm initialized
[ 6.974894] [drm] fb mappable at 0xE1480000
[ 6.974897] [drm] vram apper at 0xE0000000
[ 6.974898] [drm] size 8294400
[ 6.974899] [drm] fb depth is 24
[ 6.974900] [drm] pitch is 7680
[ 6.975047] fbcon: radeondrmfb (fb0) is primary device
[ 6.975379] switching from power state:
[ 6.975380] ui class: performance
[ 6.975381] internal class: none
[ 6.975382] caps:
[ 6.975382] uvd vclk: 0 dclk: 0
[ 6.975383] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 6.975384] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 6.975385] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 6.975386] status: c r
[ 6.975387] switching to power state:
[ 6.975387] ui class: performance
[ 6.975388] internal class: none
[ 6.975388] caps:
[ 6.975389] uvd vclk: 0 dclk: 0
[ 6.975390] power level 0 sclk: 30000 mclk: 15000 vddc: 825 vddci: 850 pcie gen: 2
[ 6.975391] power level 1 sclk: 45000 mclk: 120000 vddc: 900 vddci: 975 pcie gen: 2
[ 6.975391] power level 2 sclk: 105000 mclk: 120000 vddc: 1219 vddci: 975 pcie gen: 2
[ 6.975392] status: c r
[ 7.646095] Console: switching to colour frame buffer device 240x67
[ 7.651956] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.651958] radeon 0000:01:00.0: registered panic notifier
[ 7.651964] [drm] Initialized radeon 2.35.0 20080528 for 0000:01:00.0 on minor 0
[ 8.389134] type=1006 audit(1386490760.786:2): pid=513 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
[ 8.529592] systemd-journald[178]: Vacuuming done, freed 0 bytes
[ 31.087745] wlan0: authenticate with 00:23:69:65:2b:59
[ 31.091616] wlan0: send auth to 00:23:69:65:2b:59 (try 1/3)
[ 31.146202] wlan0: authenticated
[ 31.148312] wlan0: associate with 00:23:69:65:2b:59 (try 1/3)
[ 31.150958] wlan0: RX AssocResp from 00:23:69:65:2b:59 (capab=0x411 status=0 aid=4)
[ 31.151007] wlan0: associated
[ 31.151030] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Xorg.0-v.log
Type: text/x-log
Size: 51437 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20131208/46cf3b7b/attachment-0001.bin>
More information about the Alsa-devel
mailing list