[alsa-devel] [PATCH v3 1/4] ALSA: hda - add flags and routines to get devices selection info for DP1.2 MST

mengdong.lin at intel.com mengdong.lin at intel.com
Tue Aug 27 03:35:21 CEST 2013


From: Mengdong Lin <mengdong.lin at intel.com>

This patch adds flags and routines to get device list & selection info on
a pin.

To support Display Port 1.2 multi-stream transport (MST) over single DP port,
a pin can support multiple devices. Please refer to HD-A spec Document Change
Notificaton HDA040-A.

A display audio codec can set flag "dp_mst" in its patch, indicating its pins
can support MST. But at runtime, a pin may not be multi-streaming capable and
report the device list is empty, depending on Gfx driver configuration.

Signed-off-by: Mengdong Lin <mengdong.lin at intel.com>

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index fdbb09a..5b6c4e3 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -666,6 +666,64 @@ int snd_hda_get_conn_index(struct hda_codec *codec, hda_nid_t mux,
 }
 EXPORT_SYMBOL_HDA(snd_hda_get_conn_index);
 
+
+/* return DEVLIST_LEN parameter of the given widget */
+static unsigned int get_num_devices(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int wcaps = get_wcaps(codec, nid);
+	unsigned int parm;
+
+	if (!codec->dp_mst || !(wcaps & AC_WCAP_DIGITAL) ||
+	    get_wcaps_type(wcaps) != AC_WID_PIN)
+		return 0;
+
+	parm = snd_hda_param_read(codec, nid, AC_PAR_DEVLIST_LEN);
+	if (parm == -1 && codec->bus->rirb_error)
+		parm = 0;
+	return parm & AC_DEV_LIST_LEN_MASK;
+}
+
+/**
+ * snd_hda_get_devices - copy device list without cache
+ * @codec: the HDA codec
+ * @nid: NID of the pin to parse
+ * @dev_list: device list array
+ * @max_devices: max. number of devices to store
+ *
+ * Copy the device list. This info is dynamic and so not cached.
+ * Currently called only from hda_proc.c, so not exported.
+ */
+int snd_hda_get_devices(struct hda_codec *codec, hda_nid_t nid,
+			u8 *dev_list, int max_devices)
+{
+	unsigned int parm;
+	int i, dev_len, devices;
+
+	parm = get_num_devices(codec, nid);
+	if (!parm)	/* not multi-stream capable */
+		return 0;
+
+	dev_len = parm + 1;
+	dev_len = dev_len < max_devices ? dev_len : max_devices;
+
+	devices = 0;
+	while (devices < dev_len) {
+		parm = snd_hda_codec_read(codec, nid, 0,
+					  AC_VERB_GET_DEVICE_LIST, devices);
+		if (parm == -1 && codec->bus->rirb_error)
+			break;
+
+		for (i = 0; i < 8; i++) {
+			dev_list[devices] = (u8)parm;
+			parm >>= 4;
+			devices++;
+			if (devices >= dev_len)
+				break;
+		}
+	}
+	return devices;
+}
+
 /**
  * snd_hda_queue_unsol_event - add an unsolicited event to queue
  * @bus: the BUS
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 701c2e0..b838c70 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -94,6 +94,8 @@ enum {
 #define AC_VERB_GET_HDMI_DIP_XMIT		0x0f32
 #define AC_VERB_GET_HDMI_CP_CTRL		0x0f33
 #define AC_VERB_GET_HDMI_CHAN_SLOT		0x0f34
+#define AC_VERB_GET_DEVICE_SEL			0xf35
+#define AC_VERB_GET_DEVICE_LIST			0xf36
 
 /*
  * SET verbs
@@ -133,6 +135,7 @@ enum {
 #define AC_VERB_SET_HDMI_DIP_XMIT		0x732
 #define AC_VERB_SET_HDMI_CP_CTRL		0x733
 #define AC_VERB_SET_HDMI_CHAN_SLOT		0x734
+#define AC_VERB_SET_DEVICE_SEL			0x735
 
 /*
  * Parameter IDs
@@ -154,6 +157,7 @@ enum {
 #define AC_PAR_GPIO_CAP			0x11
 #define AC_PAR_AMP_OUT_CAP		0x12
 #define AC_PAR_VOL_KNB_CAP		0x13
+#define AC_PAR_DEVLIST_LEN		0x15
 #define AC_PAR_HDMI_LPCM_CAP		0x20
 
 /*
@@ -352,6 +356,10 @@ enum {
 #define AC_LPCMCAP_44K			(1<<30)	/* 44.1kHz support */
 #define AC_LPCMCAP_44K_MS		(1<<31)	/* 44.1kHz-multiplies support */
 
+/* Display pin's device list length */
+#define AC_DEV_LIST_LEN_MASK		0x3f
+#define AC_MAX_DEV_LIST_LEN		64
+
 /*
  * Control Parameters
  */
@@ -460,6 +468,11 @@ enum {
 #define AC_DEFCFG_PORT_CONN		(0x3<<30)
 #define AC_DEFCFG_PORT_CONN_SHIFT	30
 
+/* Display pin's device list entry */
+#define AC_DE_PD			(1<<0)
+#define AC_DE_ELDV			(1<<1)
+#define AC_DE_IA			(1<<2)
+
 /* device device types (0x0-0xf) */
 enum {
 	AC_JACK_LINE_OUT,
@@ -885,6 +898,7 @@ struct hda_codec {
 	unsigned int pcm_format_first:1; /* PCM format must be set first */
 	unsigned int epss:1;		/* supporting EPSS? */
 	unsigned int cached_write:1;	/* write only to caches */
+	unsigned int dp_mst:1; /* support DP1.2 Multi-stream transport */
 #ifdef CONFIG_PM
 	unsigned int power_on :1;	/* current (global) power-state */
 	unsigned int d3_stop_clk:1;	/* support D3 operation without BCLK */
@@ -972,6 +986,8 @@ int snd_hda_override_conn_list(struct hda_codec *codec, hda_nid_t nid, int nums,
 			  const hda_nid_t *list);
 int snd_hda_get_conn_index(struct hda_codec *codec, hda_nid_t mux,
 			   hda_nid_t nid, int recursive);
+int snd_hda_get_devices(struct hda_codec *codec, hda_nid_t nid,
+			u8 *dev_list, int max_devices);
 int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid,
 				u32 *ratesp, u64 *formatsp, unsigned int *bpsp);
 
-- 
1.8.1.2



More information about the Alsa-devel mailing list