[alsa-devel] [PATCH v5 1/2] ASoC: fsl: Add S/PDIF CPU DAI driver
Tomasz Figa
tomasz.figa at gmail.com
Thu Aug 15 14:18:22 CEST 2013
Hi Nicolin,
[Ccing DT bindings maintainers]
On Thursday 15 of August 2013 19:26:39 Nicolin Chen wrote:
> This patch add S/PDIF controller driver for Freescale SoC.
>
> Signed-off-by: Nicolin Chen <b42378 at freescale.com>
> ---
> .../devicetree/bindings/sound/fsl,spdif.txt | 76 ++
> sound/soc/fsl/Kconfig | 3 +
> sound/soc/fsl/Makefile | 2 +
> sound/soc/fsl/fsl_spdif.c | 1336
> ++++++++++++++++++++ sound/soc/fsl/fsl_spdif.h
> | 224 ++++ 5 files changed, 1641 insertions(+), 0 deletions(-)
> create mode 100644
> Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode
> 100644 sound/soc/fsl/fsl_spdif.c
> create mode 100644 sound/soc/fsl/fsl_spdif.h
>
> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> b/Documentation/devicetree/bindings/sound/fsl,spdif.txt new file mode
> 100644
> index 0000000..301b827
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> @@ -0,0 +1,76 @@
> +Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
> +
> +The Freescale S/PDIF audio block is a stereo transceiver that allows
> the +processor to receive and transmit digital audio via an coaxial
> cable or +a fibre cable.
> +
> +Required properties:
> +
> + - compatible : Compatible list, contains "fsl,<chip>-spdif".
> +
> + - reg : Offset and length of the register set for the device.
> +
> + - interrupts : Contains spdif interrupt.
> +
> + - dmas : Generic dma devicetree binding as described in
> + Documentation/devicetree/bindings/dma/dma.txt.
> +
> + - dma-names : Two dmas have to be defined, "tx" and "rx".
> +
> + - clocks : Contains an entry for each entry in clock-names.
> +
> + - clock-names : Includes the following entries:
> + name type comments
> + "core" Required The core clock of spdif controller
> +
> + "rx" Optional Rx clock source for spdif record.
> + If absent, will use core clock.
> +
> + "tx" Optional Tx clock source for spdif playback.
> + If absent, will use core clock.
> +
> + "tx-32000" Optional Tx clock source for 32000Hz sample rate
> + playback. If absent, will use tx clock.
> +
> + "tx-44100" Optional Tx clock source for 44100Hz sample rate
> + playback. If absent, will use tx clock.
> +
> + "tx-48000" Optional Tx clock source for 48000Hz sample rate
> + playback. If absent, will use tx clock.
> +
> + "src<0-7>" Optional Clock source list for tx and rx clock
> + to look up their clock source indexes.
> + This clock list should be identical to
> + the list of TxClk_Source bit value of
> + register SPDIF_STC. If absent or failed
> + to look up, tx and rx clock would then
> + ignore the "rx", "tx" "tx-32000",
> + "tx-44100", "tx-48000" clock phandles
> + and select the core clock as default
> + tx and rx clock.
I suspect a little abuse of clocks property here. From the description of
"core" and "src<0-7>" clocks I assume that the IP can have up to 9 clock
inputs - core clock and up to 8 extra source clocks. Is it correct?
If yes, this makes the "tx", "rx" and "tx-*" clocks describe
configuration, not hardware. IMHO it should be up to the driver which
source clocks to use for tx and rx channels and for each sampling rate.
> +Optional properties:
> +
> + - rx-clksrc-lock: This is a boolean property. If present, ClkSrc_Sel
> bit + of SPDIF_SRPC would be set a clock source that cares DPLL locked
> condition. +
This again looks like software configuration, not hardware description.
Could you elaborate a bit more on meaning of this property?
> +Example:
> +
> +spdif: spdif at 02004000 {
> + compatible = "fsl,imx6q-spdif",
> + "fsl,imx35-spdif";
> + reg = <0x02004000 0x4000>;
> + interrupts = <0 52 0x04>;
> + dmas = <&sdma 14 18 0>,
> + <&sdma 15 18 0>;
> + dma-names = "rx", "tx";
> +
> + clocks = <&clks 197>, <&clks 3>, <&clks 197>,
> + <&clks 107>, <&clks 118>, <&clks 62>,
> + <&clks 139>;
> + clock-names = "core", "src0", "src1", "src2",
> + "src4", "src5", "src6";
> + rx-clksrc-lock;
> +
> + status = "okay";
> +};
> diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
> index e15f771..2c518db 100644
> --- a/sound/soc/fsl/Kconfig
> +++ b/sound/soc/fsl/Kconfig
> @@ -1,6 +1,9 @@
> config SND_SOC_FSL_SSI
> tristate
>
> +config SND_SOC_FSL_SPDIF
> + tristate
> +
> config SND_SOC_FSL_UTILS
> tristate
>
> diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
> index d4b4aa8..4b5970e 100644
> --- a/sound/soc/fsl/Makefile
> +++ b/sound/soc/fsl/Makefile
> @@ -12,9 +12,11 @@ obj-$(CONFIG_SND_SOC_P1022_RDK) +=
> snd-soc-p1022-rdk.o
>
> # Freescale PowerPC SSI/DMA Platform Support
> snd-soc-fsl-ssi-objs := fsl_ssi.o
> +snd-soc-fsl-spdif-objs := fsl_spdif.o
> snd-soc-fsl-utils-objs := fsl_utils.o
> snd-soc-fsl-dma-objs := fsl_dma.o
> obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o
> +obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o
> obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o
> obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
>
> diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
> new file mode 100644
> index 0000000..173d699
> --- /dev/null
> +++ b/sound/soc/fsl/fsl_spdif.c
> @@ -0,0 +1,1336 @@
> +/*
> + * Freescale S/PDIF ALSA SoC Digital Audio Interface (DAI) driver
> + *
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
> + *
> + * Based on stmp3xxx_spdif_dai.c
> + * Vladimir Barinov <vbarinov at embeddedalley.com>
> + * Copyright 2008 SigmaTel, Inc
> + * Copyright 2008 Embedded Alley Solutions, Inc
> + *
> + * This file is licensed under the terms of the GNU General Public
> License + * version 2. This program is licensed "as is" without any
> warranty of any + * kind, whether express or implied.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/clk-private.h>
> +#include <linux/regmap.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +
> +#include <sound/asoundef.h>
> +#include <sound/soc.h>
> +#include <sound/dmaengine_pcm.h>
> +
> +#include "fsl_spdif.h"
> +#include "imx-pcm.h"
> +
> +#define FSL_SPDIF_TXFIFO_WML 0x8
> +#define FSL_SPDIF_RXFIFO_WML 0x8
> +
> +#define INTR_FOR_PLAYBACK (INT_TXFIFO_RESYNC)
> +#define INTR_FOR_CAPTURE (INT_SYM_ERR | INT_BIT_ERR | INT_URX_FUL |
> INT_URX_OV|\ + INT_QRX_FUL | INT_QRX_OV | INT_UQ_SYNC | INT_UQ_ERR |\
> + INT_RXFIFO_RESYNC | INT_LOSS_LOCK | INT_DPLL_LOCKED)
> +
> +/* Index list for the values that has if (DPLL Locked) in ClkSrc_Sel
> bit of SRPC */ +static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3,
> 0x4, 0xa, 0xb, }; +#define SRPC_NODPLL_START1 0x5
> +#define SRPC_NODPLL_START2 0xc
> +
> +/*
> + * SPDIF control structure
> + * Defines channel status, subcode and Q sub
> + */
> +struct spdif_mixer_control {
> + /* spinlock to access control data */
> + spinlock_t ctl_lock;
> +
> + /* IEC958 channel tx status bit */
> + unsigned char ch_status[4];
> +
> + /* User bits */
> + unsigned char subcode[2 * SPDIF_UBITS_SIZE];
> +
> + /* Q subcode part of user bits */
> + unsigned char qsub[2 * SPDIF_QSUB_SIZE];
> +
> + /* buffer ptrs for writer */
> + u32 upos;
> + u32 qpos;
> +
> + /* ready buffer index of the two buffers */
> + u32 ready_buf;
> +};
> +
> +struct fsl_spdif_priv {
> + struct spdif_mixer_control fsl_spdif_control;
> + struct snd_soc_dai_driver cpu_dai_drv;
> + struct platform_device *pdev;
> + struct regmap *regmap;
> + atomic_t dpll_locked;
> + u32 irq;
> + s8 rxclk_src;
> + s8 txclk_src[SPDIF_TXRATE_MAX];
> + u8 txclk_div[SPDIF_TXRATE_MAX];
> + struct clk *txclk[SPDIF_TXRATE_MAX];
> + struct clk *txclk_main;
> + struct clk *rxclk;
> + struct clk *coreclk;
> + struct snd_dmaengine_dai_dma_data dma_params_tx;
> + struct snd_dmaengine_dai_dma_data dma_params_rx;
> +
> + /* The name space will be allocated dynamically */
> + char name[0];
> +};
> +
> +
> +#ifdef DEBUG
> +static void dumpregs(struct fsl_spdif_priv *spdif_priv)
> +{
> + struct regmap *regmap = spdif_priv->regmap;
> + struct platform_device *pdev = spdif_priv->pdev;
> + u32 val, i;
> + int ret;
> +
> + /* Valid address set of SPDIF is {[0x0-0x38], 0x44, 0x50} */
> + for (i = 0 ; i <= REG_SPDIF_STC; i += 4) {
> + ret = regmap_read(regmap, REG_SPDIF_SCR + i, &val);
> + if (!ret)
> + dev_dbg(&pdev->dev, "REG 0x%02x = 0x%06x\n", i, val);
> + }
> +}
> +#else
> +static void dumpregs(struct fsl_spdif_priv *spdif_priv) {}
> +#endif
> +
> +
> +/* DPLL locked and lock loss interrupt handler */
> +static void spdif_irq_dpll_lock(struct fsl_spdif_priv *spdif_priv)
> +{
> + struct regmap *regmap = spdif_priv->regmap;
> + struct platform_device *pdev = spdif_priv->pdev;
> + u32 locked;
> +
> + regmap_read(regmap, REG_SPDIF_SRPC, &locked);
> + locked &= SRPC_DPLL_LOCKED;
> +
> + dev_dbg(&pdev->dev, "isr: Rx dpll %s \n",
> + locked ? "locked" : "loss lock");
> +
> + atomic_set(&spdif_priv->dpll_locked, locked ? 1 : 0);
> +}
> +
> +/* Receiver found illegal symbol interrupt handler */
> +static void spdif_irq_sym_error(struct fsl_spdif_priv *spdif_priv)
> +{
> + struct regmap *regmap = spdif_priv->regmap;
> + struct platform_device *pdev = spdif_priv->pdev;
> +
> + dev_dbg(&pdev->dev, "isr: receiver found illegal symbol\n");
> +
> + if (!atomic_read(&spdif_priv->dpll_locked)) {
> + /* dpll unlocked seems no audio stream */
> + regmap_update_bits(regmap, REG_SPDIF_SIE, INT_SYM_ERR, 0);
> + }
> +}
> +
> +/* U/Q Channel receive register full */
> +static void spdif_irq_uqrx_full(struct fsl_spdif_priv *spdif_priv, char
> name) +{
> + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
> + struct regmap *regmap = spdif_priv->regmap;
> + struct platform_device *pdev = spdif_priv->pdev;
> + u32 *pos, size, val, reg;
> +
> + switch (name) {
> + case 'U':
> + pos = &ctrl->upos;
> + size = SPDIF_UBITS_SIZE;
> + reg = REG_SPDIF_SRU;
> + break;
> + case 'Q':
> + pos = &ctrl->qpos;
> + size = SPDIF_QSUB_SIZE;
> + reg = REG_SPDIF_SRQ;
> + break;
> + default:
> + return;
> + }
> +
> + dev_dbg(&pdev->dev, "isr: %c Channel receive register full\n", name);
> +
> + if (*pos >= size * 2) {
> + *pos = 0;
> + } else if (unlikely((*pos % size) + 3 > size)) {
> + dev_err(&pdev->dev, "User bit receivce buffer overflow\n");
> + return;
> + }
> +
> + regmap_read(regmap, reg, &val);
> + ctrl->subcode[*pos++] = val >> 16;
> + ctrl->subcode[*pos++] = val >> 8;
> + ctrl->subcode[*pos++] = val;
> +}
> +
> +/* U/Q Channel sync found */
> +static void spdif_irq_uq_sync(struct fsl_spdif_priv *spdif_priv)
> +{
> + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
> + struct platform_device *pdev = spdif_priv->pdev;
> +
> + dev_dbg(&pdev->dev, "isr: U/Q Channel sync found\n");
> +
> + /* U/Q buffer reset */
> + if (ctrl->qpos == 0)
> + return;
> +
> + /* set ready to this buffer */
> + ctrl->ready_buf = (ctrl->qpos - 1) / SPDIF_QSUB_SIZE + 1;
> +}
> +
> +/* U/Q Channel framing error */
> +static void spdif_irq_uq_err(struct fsl_spdif_priv *spdif_priv)
> +{
> + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
> + struct regmap *regmap = spdif_priv->regmap;
> + struct platform_device *pdev = spdif_priv->pdev;
> + u32 val;
> +
> + dev_dbg(&pdev->dev, "isr: U/Q Channel framing error\n");
> +
> + /* read U/Q data and do buffer reset */
> + regmap_read(regmap, REG_SPDIF_SRU, &val);
> + regmap_read(regmap, REG_SPDIF_SRQ, &val);
> +
> + /* drop this U/Q buffer */
> + ctrl->ready_buf = 0;
> + ctrl->upos = 0;
> + ctrl->qpos = 0;
> +}
> +
> +/* Get spdif interrupt status and clear the interrupt */
> +static u32 spdif_intr_status_clear(struct fsl_spdif_priv *spdif_priv)
> +{
> + struct regmap *regmap = spdif_priv->regmap;
> + u32 val, val2;
> +
> + regmap_read(regmap, REG_SPDIF_SIS, &val);
> + regmap_read(regmap, REG_SPDIF_SIE, &val2);
> +
> + regmap_write(regmap, REG_SPDIF_SIC, val & val2);
> +
> + return val;
> +}
> +
> +static irqreturn_t spdif_isr(int irq, void *devid)
> +{
> + struct fsl_spdif_priv *spdif_priv = (struct fsl_spdif_priv *)devid;
> + struct platform_device *pdev = spdif_priv->pdev;
> + u32 sis;
> +
> + sis = spdif_intr_status_clear(spdif_priv);
> +
> + if (sis & INT_DPLL_LOCKED)
> + spdif_irq_dpll_lock(spdif_priv);
> +
> + if (sis & INT_TXFIFO_UNOV)
> + dev_dbg(&pdev->dev, "isr: Tx FIFO under/overrun\n");
> +
> + if (sis & INT_TXFIFO_RESYNC)
> + dev_dbg(&pdev->dev, "isr: Tx FIFO resync\n");
> +
> + if (sis & INT_CNEW)
> + dev_dbg(&pdev->dev, "isr: cstatus new\n");
> +
> + if (sis & INT_VAL_NOGOOD)
> + dev_dbg(&pdev->dev, "isr: validity flag no good\n");
> +
> + if (sis & INT_SYM_ERR)
> + spdif_irq_sym_error(spdif_priv);
> +
> + if (sis & INT_BIT_ERR)
> + dev_dbg(&pdev->dev, "isr: receiver found parity bit error\n");
> +
> + if (sis & INT_URX_FUL)
> + spdif_irq_uqrx_full(spdif_priv, 'U');
> +
> + if (sis & INT_URX_OV)
> + dev_dbg(&pdev->dev, "isr: U Channel receive register overrun\n");
> +
> + if (sis & INT_QRX_FUL)
> + spdif_irq_uqrx_full(spdif_priv, 'Q');
> +
> + if (sis & INT_QRX_OV)
> + dev_dbg(&pdev->dev, "isr: Q Channel receive register overrun\n");
> +
> + if (sis & INT_UQ_SYNC)
> + spdif_irq_uq_sync(spdif_priv);
> +
> + if (sis & INT_UQ_ERR)
> + spdif_irq_uq_err(spdif_priv);
> +
> + if (sis & INT_RXFIFO_UNOV)
> + dev_dbg(&pdev->dev, "isr: Rx FIFO under/overrun\n");
> +
> + if (sis & INT_RXFIFO_RESYNC)
> + dev_dbg(&pdev->dev, "isr: Rx FIFO resync\n");
> +
> + if (sis & INT_LOSS_LOCK)
> + spdif_irq_dpll_lock(spdif_priv);
> +
> + /* FIXME: Write Tx FIFO to clear TxEm */
> + if (sis & INT_TX_EM)
> + dev_dbg(&pdev->dev, "isr: Tx FIFO empty\n");
> +
> + /* FIXME: Read Rx FIFO to clear RxFIFOFul */
> + if (sis & INT_RXFIFO_FUL)
> + dev_dbg(&pdev->dev, "isr: Rx FIFO full\n");
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void spdif_softreset(struct fsl_spdif_priv *spdif_priv)
> +{
> + struct regmap *regmap = spdif_priv->regmap;
> + u32 val, cycle = 1000;
> +
> + regmap_write(regmap, REG_SPDIF_SCR, SCR_SOFT_RESET);
> + regcache_sync(regmap);
> +
> + /* RESET bit would be cleared after finishing its reset procedure */
> + do {
> + regmap_read(regmap, REG_SPDIF_SCR, &val);
> + } while ((val & SCR_SOFT_RESET) && cycle--);
> +}
> +
> +static void spdif_set_cstatus(struct spdif_mixer_control *ctrl,
> + u8 mask, u8 cstatus)
> +{
> + ctrl->ch_status[3] &= ~mask;
> + ctrl->ch_status[3] |= cstatus & mask;
> +}
> +
> +static u8 reverse_bits(u8 input)
> +{
> + u8 tmp = input;
> +
> + tmp = ((tmp & 0b10101010) >> 1) | ((tmp << 1) & 0b10101010);
> + tmp = ((tmp & 0b11001100) >> 2) | ((tmp << 2) & 0b11001100);
> + tmp = ((tmp & 0b11110000) >> 4) | ((tmp << 4) & 0b11110000);
> +
> + return tmp;
> +}
> +
> +static void spdif_write_channel_status(struct fsl_spdif_priv
> *spdif_priv) +{
> + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
> + struct regmap *regmap = spdif_priv->regmap;
> + struct platform_device *pdev = spdif_priv->pdev;
> + u32 ch_status;
> +
> + ch_status = (reverse_bits(ctrl->ch_status[0]) << 16) |
> + (reverse_bits(ctrl->ch_status[1]) << 8) |
> + reverse_bits(ctrl->ch_status[2]);
> + regmap_write(regmap, REG_SPDIF_STCSCH, ch_status);
> +
> + dev_dbg(&pdev->dev, "STCSCH: 0x%06x\n", ch_status);
> +
> + ch_status = reverse_bits(ctrl->ch_status[3]) << 16;
> + regmap_write(regmap, REG_SPDIF_STCSCL, ch_status);
> +
> + dev_dbg(&pdev->dev, "STCSCL: 0x%06x\n", ch_status);
> +}
> +
> +/* Set SPDIF PhaseConfig register for rx clock */
> +static int spdif_set_rx_clksrc(struct fsl_spdif_priv *spdif_priv,
> + enum spdif_gainsel gainsel, int dpll_locked)
> +{
> + enum spdif_rxclk_src clksrc = spdif_priv->rxclk_src;
> + struct regmap *regmap = spdif_priv->regmap;
> +
> + if (clksrc >= SRPC_CLKSRC_MAX || gainsel >= GAINSEL_MULTI_MAX)
> + return -EINVAL;
> +
> + regmap_update_bits(regmap, REG_SPDIF_SRPC,
> + SRPC_CLKSRC_SEL_MASK | SRPC_GAINSEL_MASK,
> + SRPC_CLKSRC_SEL_SET(clksrc) | SRPC_GAINSEL_SET(gainsel));
> +
> + return 0;
> +}
> +
> +static int spdif_clk_set_rate(struct clk *clk, unsigned long rate)
> +{
> + unsigned long rate_actual;
> +
> + rate_actual = clk_round_rate(clk, rate);
> + clk_set_rate(clk, rate_actual);
> +
> + return 0;
> +}
> +
> +static int spdif_set_sample_rate(struct snd_pcm_substream *substream,
> + int sample_rate)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct fsl_spdif_priv *spdif_priv =
> snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct spdif_mixer_control
> *ctrl = &spdif_priv->fsl_spdif_control; + struct regmap *regmap =
> spdif_priv->regmap;
> + struct platform_device *pdev = spdif_priv->pdev;
> + unsigned long clk = -1, div = 1, csfs = 0;
> + u32 stc, mask, rate;
> +
> + switch (sample_rate) {
> + case 32000:
> + rate = SPDIF_TXRATE_32000;
> + csfs = IEC958_AES3_CON_FS_32000;
> + break;
> + case 44100:
> + rate = SPDIF_TXRATE_44100;
> + csfs = IEC958_AES3_CON_FS_44100;
> + break;
> + case 48000:
> + rate = SPDIF_TXRATE_48000;
> + csfs = IEC958_AES3_CON_FS_48000;
> + break;
> + default:
> + dev_err(&pdev->dev, "unsupported samplerate %d\n", sample_rate);
> + return -EINVAL;
> + }
> +
> + clk = spdif_priv->txclk_src[rate];
> + if (clk < 0) {
> + dev_err(&pdev->dev, "no defined %d clk src\n", sample_rate);
> + return -EINVAL;
> + }
> +
> + div = spdif_priv->txclk_div[rate];
> + if (div == 0) {
> + dev_err(&pdev->dev, "tx clock source is dividing by zero\n");
> + return -EINVAL;
> + }
> + /*
> + * The S/PDIF block needs a clock of 64 * fs * div. The S/PDIF block
> + * will divide by (div). So request 64 * fs * (div+1) which will
> + * get rounded.
> + */
> + spdif_clk_set_rate(spdif_priv->txclk[rate], 64 * sample_rate * (div +
> 1)); +
> + dev_dbg(&pdev->dev, "expected clock rate = %d\n",
> + (int)(64 * sample_rate * div));
> + dev_dbg(&pdev->dev, "acutal clock rate = %d\n",
> + (int)clk_get_rate(spdif_priv->txclk[rate]));
> +
> + /* set fs field in consumer channel status */
> + spdif_set_cstatus(ctrl, IEC958_AES3_CON_FS, csfs);
> +
> + /* select clock source and divisor */
> + stc = STC_TXCLK_ALL_EN | STC_TXCLK_SRC_SET(clk) | STC_TXCLK_DIV(div);
> + mask = STC_TXCLK_ALL_EN_MASK | STC_TXCLK_SRC_MASK |
> STC_TXCLK_DIV_MASK; + regmap_update_bits(regmap, REG_SPDIF_STC, mask,
> stc);
> +
> + dev_dbg(&pdev->dev, "set sample rate to %d\n", sample_rate);
> +
> + return 0;
> +}
> +
> +int fsl_spdif_startup(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *cpu_dai)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct fsl_spdif_priv *spdif_priv =
> snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct regmap *regmap =
> spdif_priv->regmap;
> + u32 scr, mask, i;
> +
> + /* Reset module and interrupts only for first initialization */
> + if (!cpu_dai->active) {
> + spdif_softreset(spdif_priv);
> +
> + /* disable all the interrupts */
> + regmap_update_bits(regmap, REG_SPDIF_SIE, 0xffffff, 0);
> + }
> +
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> + scr = SCR_TXFIFO_AUTOSYNC | SCR_TXFIFO_CTRL_NORMAL |
> + SCR_TXSEL_NORMAL | SCR_USRC_SEL_CHIP |
> + SCR_TXFIFO_FSEL_IF8;
> + mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK |
> + SCR_TXSEL_MASK | SCR_USRC_SEL_MASK |
> + SCR_TXFIFO_FSEL_MASK;
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++)
> + clk_enable(spdif_priv->txclk[i]);
> + } else {
> + scr = SCR_RXFIFO_FSEL_IF8 | SCR_RXFIFO_AUTOSYNC;
> + mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK|
> + SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK;
> + clk_enable(spdif_priv->rxclk);
> + }
> + regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr);
> +
> + /* Power up SPDIF module */
> + regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_LOW_POWER, 0);
> +
> + return 0;
> +}
> +
> +static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
> + struct snd_soc_dai *cpu_dai)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct fsl_spdif_priv *spdif_priv =
> snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct regmap *regmap =
> spdif_priv->regmap;
> + u32 scr, mask, i;
> +
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> + scr = 0;
> + mask = SCR_TXFIFO_AUTOSYNC_MASK | SCR_TXFIFO_CTRL_MASK |
> + SCR_TXSEL_MASK | SCR_USRC_SEL_MASK |
> + SCR_TXFIFO_FSEL_MASK;
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++)
> + clk_disable(spdif_priv->txclk[i]);
> + } else {
> + scr = SCR_RXFIFO_OFF | SCR_RXFIFO_CTL_ZERO;
> + mask = SCR_RXFIFO_FSEL_MASK | SCR_RXFIFO_AUTOSYNC_MASK|
> + SCR_RXFIFO_CTL_MASK | SCR_RXFIFO_OFF_MASK;
> + clk_disable(spdif_priv->rxclk);
> + }
> + regmap_update_bits(regmap, REG_SPDIF_SCR, mask, scr);
> +
> + /* Power down SPDIF module only if tx&rx are both inactive */
> + if (!cpu_dai->active) {
> + spdif_intr_status_clear(spdif_priv);
> + regmap_update_bits(regmap, REG_SPDIF_SCR, SCR_LOW_POWER,
> SCR_LOW_POWER); + }
> +}
> +
> +static int fsl_spdif_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *dai)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct fsl_spdif_priv *spdif_priv =
> snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct spdif_mixer_control
> *ctrl = &spdif_priv->fsl_spdif_control; + struct platform_device *pdev
> = spdif_priv->pdev;
> + u32 sample_rate = params_rate(params);
> + int ret = 0;
> +
> + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> + ret = spdif_set_sample_rate(substream, sample_rate);
> + if (ret) {
> + dev_err(&pdev->dev, "%s: set sample rate failed: %d\n",
> + __func__, sample_rate);
> + return ret;
> + }
> + spdif_set_cstatus(ctrl, IEC958_AES3_CON_CLOCK,
> + IEC958_AES3_CON_CLOCK_1000PPM);
> + spdif_write_channel_status(spdif_priv);
> + } else {
> + /* setup rx clock source */
> + ret = spdif_set_rx_clksrc(spdif_priv, SPDIF_DEFAULT_GAINSEL, 1);
> + }
> +
> + return ret;
> +}
> +
> +static int fsl_spdif_trigger(struct snd_pcm_substream *substream,
> + int cmd, struct snd_soc_dai *dai)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct fsl_spdif_priv *spdif_priv =
> snd_soc_dai_get_drvdata(rtd->cpu_dai); + struct regmap *regmap =
> spdif_priv->regmap;
> + int is_playack = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
> + u32 intr = is_playack ? INTR_FOR_PLAYBACK : INTR_FOR_CAPTURE;
> + u32 dmaen = is_playack ? SCR_DMA_TX_EN : SCR_DMA_RX_EN;;
> +
> + switch (cmd) {
> + case SNDRV_PCM_TRIGGER_START:
> + case SNDRV_PCM_TRIGGER_RESUME:
> + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> + regmap_update_bits(regmap, REG_SPDIF_SIE, intr, intr);
> + regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, dmaen);
> + dumpregs(spdif_priv);
> + break;
> + case SNDRV_PCM_TRIGGER_STOP:
> + case SNDRV_PCM_TRIGGER_SUSPEND:
> + case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> + regmap_update_bits(regmap, REG_SPDIF_SCR, dmaen, 0);
> + regmap_update_bits(regmap, REG_SPDIF_SIE, intr, 0);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +struct snd_soc_dai_ops fsl_spdif_dai_ops = {
> + .startup = fsl_spdif_startup,
> + .hw_params = fsl_spdif_hw_params,
> + .trigger = fsl_spdif_trigger,
> + .shutdown = fsl_spdif_shutdown,
> +};
> +
> +
> +/*
> + * ============================================
> + * FSL SPDIF IEC958 controller(mixer) functions
> + *
> + * Channel status get/put control
> + * User bit value get/put control
> + * Valid bit value get control
> + * DPLL lock status get control
> + * User bit sync mode selection control
> + * ============================================
> + */
> +
> +static int fsl_spdif_info(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
> + uinfo->count = 1;
> +
> + return 0;
> +}
> +
> +static int fsl_spdif_pb_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *uvalue)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
> +
> + uvalue->value.iec958.status[0] = ctrl->ch_status[0];
> + uvalue->value.iec958.status[1] = ctrl->ch_status[1];
> + uvalue->value.iec958.status[2] = ctrl->ch_status[2];
> + uvalue->value.iec958.status[3] = ctrl->ch_status[3];
> +
> + return 0;
> +}
> +
> +static int fsl_spdif_pb_put(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *uvalue)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
> +
> + ctrl->ch_status[0] = uvalue->value.iec958.status[0];
> + ctrl->ch_status[1] = uvalue->value.iec958.status[1];
> + ctrl->ch_status[2] = uvalue->value.iec958.status[2];
> + ctrl->ch_status[3] = uvalue->value.iec958.status[3];
> +
> + spdif_write_channel_status(spdif_priv);
> +
> + return 0;
> +}
> +
> +/* Get channel status from SPDIF_RX_CCHAN register */
> +static int fsl_spdif_capture_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + struct regmap *regmap = spdif_priv->regmap;
> + u32 cstatus, val;
> +
> + regmap_read(regmap, REG_SPDIF_SIS, &val);
> + if (!(val & INT_CNEW)) {
> + return -EAGAIN;
> + }
> +
> + regmap_read(regmap, REG_SPDIF_SRCSH, &cstatus);
> + ucontrol->value.iec958.status[0] = (cstatus >> 16) & 0xFF;
> + ucontrol->value.iec958.status[1] = (cstatus >> 8) & 0xFF;
> + ucontrol->value.iec958.status[2] = cstatus & 0xFF;
> +
> + regmap_read(regmap, REG_SPDIF_SRCSL, &cstatus);
> + ucontrol->value.iec958.status[3] = (cstatus >> 16) & 0xFF;
> + ucontrol->value.iec958.status[4] = (cstatus >> 8) & 0xFF;
> + ucontrol->value.iec958.status[5] = cstatus & 0xFF;
> +
> + /* clear intr */
> + regmap_write(regmap, REG_SPDIF_SIC, INT_CNEW);
> +
> + return 0;
> +}
> +
> +/*
> + * Get User bits (subcode) from chip value which readed out
> + * in UChannel register.
> + */
> +static int fsl_spdif_subcode_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
> + unsigned long flags;
> + int ret = 0;
> +
> + spin_lock_irqsave(&ctrl->ctl_lock, flags);
> + if (ctrl->ready_buf) {
> + int idx = (ctrl->ready_buf - 1) * SPDIF_UBITS_SIZE;
> + memcpy(&ucontrol->value.iec958.subcode[0],
> + &ctrl->subcode[idx], SPDIF_UBITS_SIZE);
> + } else {
> + ret = -EAGAIN;
> + }
> + spin_unlock_irqrestore(&ctrl->ctl_lock, flags);
> +
> + return ret;
> +}
> +
> +/* Q-subcode infomation. The byte size is SPDIF_UBITS_SIZE/8 */
> +static int fsl_spdif_qinfo(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
> + uinfo->count = SPDIF_QSUB_SIZE;
> +
> + return 0;
> +}
> +
> +/* Get Q subcode from chip value which readed out in QChannel register
> */ +static int fsl_spdif_qget(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + struct spdif_mixer_control *ctrl = &spdif_priv->fsl_spdif_control;
> + unsigned long flags;
> + int ret = 0;
> +
> + spin_lock_irqsave(&ctrl->ctl_lock, flags);
> + if (ctrl->ready_buf) {
> + int idx = (ctrl->ready_buf - 1) * SPDIF_QSUB_SIZE;
> + memcpy(&ucontrol->value.bytes.data[0],
> + &ctrl->qsub[idx], SPDIF_QSUB_SIZE);
> + } else {
> + ret = -EAGAIN;
> + }
> + spin_unlock_irqrestore(&ctrl->ctl_lock, flags);
> +
> + return ret;
> +}
> +
> +/* Valid bit infomation */
> +static int fsl_spdif_vbit_info(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
> + uinfo->count = 1;
> + uinfo->value.integer.min = 0;
> + uinfo->value.integer.max = 1;
> +
> + return 0;
> +}
> +
> +/* Get valid good bit from interrupt status register */
> +static int fsl_spdif_vbit_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + struct regmap *regmap = spdif_priv->regmap;
> + u32 val;
> +
> + val = regmap_read(regmap, REG_SPDIF_SIS, &val);
> + ucontrol->value.integer.value[0] = (val & INT_VAL_NOGOOD) != 0;
> + regmap_write(regmap, REG_SPDIF_SIC, INT_VAL_NOGOOD);
> +
> + return 0;
> +}
> +
> +/* DPLL lock infomation */
> +static int fsl_spdif_rxrate_info(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
> + uinfo->count = 1;
> + uinfo->value.integer.min = 16000;
> + uinfo->value.integer.max = 96000;
> +
> + return 0;
> +}
> +
> +static u32 gainsel_multi[GAINSEL_MULTI_MAX] = {
> + 24, 16, 12, 8, 6, 4, 3,
> +};
> +
> +/* Get RX data clock rate given the SPDIF bus_clk */
> +static int spdif_get_rxclk_rate(struct fsl_spdif_priv *spdif_priv,
> + enum spdif_gainsel gainsel)
> +{
> + struct regmap *regmap = spdif_priv->regmap;
> + struct platform_device *pdev = spdif_priv->pdev;
> + u64 tmpval64, busclk_freq = 0;
> + u32 freqmeas, phaseconf;
> + enum spdif_rxclk_src clksrc;
> +
> + regmap_read(regmap, REG_SPDIF_SRFM, &freqmeas);
> + regmap_read(regmap, REG_SPDIF_SRPC, &phaseconf);
> +
> + clksrc = (phaseconf >> SRPC_CLKSRC_SEL_OFFSET) & 0xf;
> + if (srpc_dpll_locked[clksrc] && (phaseconf & SRPC_DPLL_LOCKED)) {
> + /* get bus clock from system */
> + busclk_freq = clk_get_rate(spdif_priv->rxclk);
> + }
> +
> + /* FreqMeas_CLK = (BUS_CLK * FreqMeas) / 2 ^ 10 / GAINSEL / 128 */
> + tmpval64 = (u64) busclk_freq * freqmeas;
> + do_div(tmpval64, gainsel_multi[gainsel] * 1024);
> + do_div(tmpval64, 128 * 1024);
> +
> + dev_dbg(&pdev->dev, "FreqMeas: %d\n", (int)freqmeas);
> + dev_dbg(&pdev->dev, "BusclkFreq: %d\n", (int)busclk_freq);
> + dev_dbg(&pdev->dev, "RxRate: %d\n", (int)tmpval64);
> +
> + return (int)tmpval64;
> +}
> +
> +/*
> + * Get DPLL lock or not info from stable interrupt status register.
> + * User application must use this control to get locked,
> + * then can do next PCM operation
> + */
> +static int fsl_spdif_rxrate_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + int rate = spdif_get_rxclk_rate(spdif_priv, SPDIF_DEFAULT_GAINSEL);
> +
> + if (atomic_read(&spdif_priv->dpll_locked))
> + ucontrol->value.integer.value[0] = rate;
> + else
> + ucontrol->value.integer.value[0] = 0;
> +
> + return 0;
> +}
> +
> +/* User bit sync mode info */
> +static int fsl_spdif_usync_info(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_info *uinfo)
> +{
> + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
> + uinfo->count = 1;
> + uinfo->value.integer.min = 0;
> + uinfo->value.integer.max = 1;
> +
> + return 0;
> +}
> +
> +/*
> + * User bit sync mode:
> + * 1 CD User channel subcode
> + * 0 Non-CD data
> + */
> +static int fsl_spdif_usync_get(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + struct regmap *regmap = spdif_priv->regmap;
> + u32 val;
> +
> + regmap_read(regmap, REG_SPDIF_SRCD, &val);
> + ucontrol->value.integer.value[0] = (val & SRCD_CD_USER) != 0;
> +
> + return 0;
> +}
> +
> +/*
> + * User bit sync mode:
> + * 1 CD User channel subcode
> + * 0 Non-CD data
> + */
> +static int fsl_spdif_usync_put(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dai *cpu_dai = snd_kcontrol_chip(kcontrol);
> + struct fsl_spdif_priv *spdif_priv = snd_soc_dai_get_drvdata(cpu_dai);
> + struct regmap *regmap = spdif_priv->regmap;
> + u32 val = ucontrol->value.integer.value[0] << SRCD_CD_USER_OFFSET;
> +
> + regmap_update_bits(regmap, REG_SPDIF_SRCD, SRCD_CD_USER, val);
> +
> + return 0;
> +}
> +
> +/* FSL SPDIF IEC958 controller defines */
> +static struct snd_kcontrol_new fsl_spdif_ctrls[] = {
> + /* status cchanel controller */
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> + .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
> + .access = SNDRV_CTL_ELEM_ACCESS_READ |
> + SNDRV_CTL_ELEM_ACCESS_WRITE |
> + SNDRV_CTL_ELEM_ACCESS_VOLATILE,
> + .info = fsl_spdif_info,
> + .get = fsl_spdif_pb_get,
> + .put = fsl_spdif_pb_put,
> + },
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_PCM,
> + .name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT),
> + .access = SNDRV_CTL_ELEM_ACCESS_READ |
> + SNDRV_CTL_ELEM_ACCESS_VOLATILE,
> + .info = fsl_spdif_info,
> + .get = fsl_spdif_capture_get,
> + },
> + /* user bits controller */
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_PCM,
> + .name = "IEC958 Subcode Capture Default",
> + .access = SNDRV_CTL_ELEM_ACCESS_READ |
> + SNDRV_CTL_ELEM_ACCESS_VOLATILE,
> + .info = fsl_spdif_info,
> + .get = fsl_spdif_subcode_get,
> + },
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_PCM,
> + .name = "IEC958 Q-subcode Capture Default",
> + .access = SNDRV_CTL_ELEM_ACCESS_READ |
> + SNDRV_CTL_ELEM_ACCESS_VOLATILE,
> + .info = fsl_spdif_qinfo,
> + .get = fsl_spdif_qget,
> + },
> + /* valid bit error controller */
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_PCM,
> + .name = "IEC958 V-Bit Errors",
> + .access = SNDRV_CTL_ELEM_ACCESS_READ |
> + SNDRV_CTL_ELEM_ACCESS_VOLATILE,
> + .info = fsl_spdif_vbit_info,
> + .get = fsl_spdif_vbit_get,
> + },
> + /* DPLL lock info get controller */
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_PCM,
> + .name = "RX Sample Rate",
> + .access = SNDRV_CTL_ELEM_ACCESS_READ |
> + SNDRV_CTL_ELEM_ACCESS_VOLATILE,
> + .info = fsl_spdif_rxrate_info,
> + .get = fsl_spdif_rxrate_get,
> + },
> + /* User bit sync mode set/get controller */
> + {
> + .iface = SNDRV_CTL_ELEM_IFACE_PCM,
> + .name = "IEC958 USyncMode CDText",
> + .access = SNDRV_CTL_ELEM_ACCESS_READ |
> + SNDRV_CTL_ELEM_ACCESS_WRITE |
> + SNDRV_CTL_ELEM_ACCESS_VOLATILE,
> + .info = fsl_spdif_usync_info,
> + .get = fsl_spdif_usync_get,
> + .put = fsl_spdif_usync_put,
> + },
> +};
> +
> +static int fsl_spdif_dai_probe(struct snd_soc_dai *dai)
> +{
> + struct fsl_spdif_priv *spdif_private = snd_soc_dai_get_drvdata(dai);
> +
> + dai->playback_dma_data = &spdif_private->dma_params_tx;
> + dai->capture_dma_data = &spdif_private->dma_params_rx;
> +
> + snd_soc_add_dai_controls(dai, fsl_spdif_ctrls,
> ARRAY_SIZE(fsl_spdif_ctrls)); +
> + return 0;
> +}
> +
> +struct snd_soc_dai_driver fsl_spdif_dai = {
> + .probe = &fsl_spdif_dai_probe,
> + .playback = {
> + .channels_min = 2,
> + .channels_max = 2,
> + .rates = FSL_SPDIF_RATES_PLAYBACK,
> + .formats = FSL_SPDIF_FORMATS_PLAYBACK,
> + },
> + .capture = {
> + .channels_min = 2,
> + .channels_max = 2,
> + .rates = FSL_SPDIF_RATES_CAPTURE,
> + .formats = FSL_SPDIF_FORMATS_CAPTURE,
> + },
> + .ops = &fsl_spdif_dai_ops,
> +};
> +
> +static const struct snd_soc_component_driver fsl_spdif_component = {
> + .name = "fsl-spdif",
> +};
> +
> +/*
> + * ================
> + * FSL SPDIF REGMAP
> + * ================
> + */
> +
> +static bool fsl_spdif_readable_reg(struct device *dev, unsigned int
> reg) +{
> + switch (reg) {
> + case REG_SPDIF_SCR:
> + case REG_SPDIF_SRCD:
> + case REG_SPDIF_SRPC:
> + case REG_SPDIF_SIE:
> + case REG_SPDIF_SIS:
> + case REG_SPDIF_SRL:
> + case REG_SPDIF_SRR:
> + case REG_SPDIF_SRCSH:
> + case REG_SPDIF_SRCSL:
> + case REG_SPDIF_SRU:
> + case REG_SPDIF_SRQ:
> + case REG_SPDIF_STCSCH:
> + case REG_SPDIF_STCSCL:
> + case REG_SPDIF_SRFM:
> + case REG_SPDIF_STC:
> + return true;
> + default:
> + return false;
> + };
> +}
> +
> +static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int
> reg) +{
> + switch (reg) {
> + case REG_SPDIF_SCR:
> + case REG_SPDIF_SRCD:
> + case REG_SPDIF_SRPC:
> + case REG_SPDIF_SIE:
> + case REG_SPDIF_SIC:
> + case REG_SPDIF_STL:
> + case REG_SPDIF_STR:
> + case REG_SPDIF_STCSCH:
> + case REG_SPDIF_STCSCL:
> + case REG_SPDIF_STC:
> + return true;
> + default:
> + return false;
> + };
> +}
> +
> +static bool fsl_spdif_volatile_reg(struct device *dev, unsigned int
> reg) +{
> + /* Sync all registers after reset */
> + return true;
> +}
> +
> +static const struct regmap_config fsl_spdif_regmap_config = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> +
> + .max_register = REG_SPDIF_STC,
> + .readable_reg = fsl_spdif_readable_reg,
> + .writeable_reg = fsl_spdif_writeable_reg,
> + .volatile_reg = fsl_spdif_volatile_reg,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static void spdif_clksrc_index_lookup(struct fsl_spdif_priv
> *spdif_priv) +{
> + const char *rate[] = { "tx-32000", "tx-44100", "tx-48000", };
> + struct platform_device *pdev = spdif_priv->pdev;
> + struct device_node *np = pdev->dev.of_node;
> + struct clk *tmpclk;
> + char tmp[16];
> + int i, j;
> +
> + /* Start to decide tx/rxclk_src index */
> + spdif_priv->rxclk_src = -1;
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++)
> + spdif_priv->txclk_src[i] = -1;
> +
> + /* Look up the clock source list to find the clock source index */
> + for (i = 0; i < STC_TXCLK_SRC_MAX; i++) {
> + sprintf(tmp, "src%d", i);
> + tmpclk = devm_clk_get(&pdev->dev, tmp);
> + if (IS_ERR(tmpclk))
> + continue;
> +
> + /* Catch the clksrc identical to configured rxclk */
> + if (tmpclk == spdif_priv->rxclk)
> + spdif_priv->rxclk_src = i;
> +
> + for (j = 0; j < SPDIF_TXRATE_MAX; j++) {
> + /* Catch the clksrc identical to configured txclk */
> + if (tmpclk == spdif_priv->txclk[j])
> + spdif_priv->txclk_src[j] = i;
> + }
> + }
> +
> + /* Plan B when failed to find the index for rx clock source */
> + if (spdif_priv->rxclk_src == -1) {
> + dev_warn(&pdev->dev, "force to use core clock as rx clock.\n");
> + spdif_priv->rxclk_src = DEFAULT_RXCLK_SRC;
> + spdif_priv->rxclk = spdif_priv->coreclk;
> + }
> +
> + /* Plan B when failed to find the index for tx clock source */
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++) {
> + if (spdif_priv->txclk_src[i] != -1)
> + continue;
> + dev_warn(&pdev->dev, "force to use core clock as %s clock.\n",
> rate[i]); + spdif_priv->txclk_src[i] = DEFAULT_TXCLK_SRC;
> + spdif_priv->txclk[i] = spdif_priv->coreclk;
> + }
> +
> + if (i > SRPC_NODPLL_START1) {
> + /* Drop src5 for rxclk src */
> + spdif_priv->rxclk_src -= 1;
> +
> + /* Restore the offset to higher rxclk src */
> + spdif_priv->rxclk_src += SRPC_CLKSRC_SEL_LOCKED_OFFSET1;
> + }
> +
> + /* Use the un-conditioned conf for rx clock if no rx-clksrc-lock */
> + if (!of_property_read_bool(np, "rx-clksrc-lock")) {
> + if (i < SRPC_NODPLL_START1)
> + spdif_priv->rxclk_src += SRPC_CLKSRC_SEL_LOCKED_OFFSET1;
> + else if (i < SRPC_NODPLL_START2)
> + spdif_priv->rxclk_src += SRPC_CLKSRC_SEL_LOCKED_OFFSET2;
> + }
> +}
> +
> +static void spdif_clk_cal_txdiv(struct fsl_spdif_priv *spdif_priv)
> +{
> + struct platform_device *pdev = spdif_priv->pdev;
> + struct clk **clk = spdif_priv->txclk;
> + u64 rate_ideal, rate_actual, sub, savesub;
> + u32 i, div, arate, rate[] = { 32000, 44100, 48000, };
> +
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++, savesub = 100000) {
> + for (div = 1; div <= 128; div++) {
> + rate_ideal = rate[i] * (div + 1) * 64;
> + rate_actual = clk_round_rate(clk[i], rate_ideal);
> +
> + arate = rate_actual / 64;
> + arate /= div;
> + if (arate == rate[i]) {
> + savesub = 0;
> + spdif_priv->txclk_div[i] = div;
> + break;
> + } else if (arate / rate[i] == 1) {
> + sub = (arate - rate[i]) * 100000;
> + do_div(sub, rate[i]);
> + if (sub < savesub) {
> + savesub = sub;
> + spdif_priv->txclk_div[i] = div;
> + }
> + } else if (rate[i] / arate == 1) {
> + sub = (rate[i] - arate) * 100000;
> + do_div(sub, rate[i]);
> + if (sub < savesub) {
> + savesub = sub;
> + spdif_priv->txclk_div[i] = div;
> + }
> + }
> + }
> + dev_dbg(&pdev->dev, "calculated %dHz div: %d\n",
> + rate[i], spdif_priv->txclk_div[i]);
> + }
> +}
> +
> +static int fsl_spdif_probe(struct platform_device *pdev)
> +{
> + const char *p, *rate[] = { "tx-32000", "tx-44100", "tx-48000", };
> + struct fsl_spdif_priv *spdif_priv;
> + struct spdif_mixer_control *ctrl;
> + struct device_node *np = pdev->dev.of_node;
> + struct resource res;
> + void __iomem *regs;
> + int ret = 0, i;
> +
> + if (!of_device_is_available(np))
> + return -ENODEV;
I'm not sure your probe function will be ever called if the device is
unavailable. A simple check for !np would be enough.
> + /* The DAI name is the last part of the full name of the node. */
This has not been mentioned in binding documentation and I'm not sure this
is correct.
> + p = strrchr(np->full_name, '/') + 1;
You should be able to use np->name directly.
> + spdif_priv = devm_kzalloc(&pdev->dev,
> + sizeof(struct fsl_spdif_priv) + strlen(p) + 1, GFP_KERNEL);
> + if (!spdif_priv) {
> + dev_err(&pdev->dev, "could not allocate DAI object\n");
> + return -ENOMEM;
> + }
> +
> + strcpy(spdif_priv->name, p);
> +
> + spdif_priv->pdev = pdev;
> +
> + /* Initialize this copy of the CPU DAI driver structure */
> + memcpy(&spdif_priv->cpu_dai_drv, &fsl_spdif_dai,
> sizeof(fsl_spdif_dai)); + spdif_priv->cpu_dai_drv.name =
> spdif_priv->name;
> +
> + /* Get the addresses and IRQ */
> + ret = of_address_to_resource(np, 0, &res);
This has been already done for you by platform driver core. You can just
use platform_get_resource() to retrieve the already parsed resource.
> + if (ret) {
> + dev_err(&pdev->dev, "could not determine device resources\n");
> + return ret;
> + }
> +
> + regs = of_iomap(np, 0);
devm_ioremap_resource() would be better here.
> + if (IS_ERR(regs)) {
> + dev_err(&pdev->dev, "could not map device resources\n");
> + return PTR_ERR(regs);
> + }
> +
> + spdif_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
> + "core", regs, &fsl_spdif_regmap_config);
> + if (IS_ERR(spdif_priv->regmap)) {
> + dev_err(&pdev->dev, "regmap init failed\n");
> + ret = PTR_ERR(spdif_priv->regmap);
> + return ret;
> + }
> +
> + spdif_priv->irq = irq_of_parse_and_map(np, 0);
platform_get_resource()
> + if (spdif_priv->irq == NO_IRQ) {
> + dev_err(&pdev->dev, "no irq for node %s\n", np->full_name);
> + ret = -ENXIO;
> + goto error_iomap;
> + }
> +
> + /* The 'name' should not have any slashes in it. */
> + ret = request_irq(spdif_priv->irq, spdif_isr, 0,
> + spdif_priv->name, spdif_priv);
> + if (ret) {
> + dev_err(&pdev->dev, "could not claim irq %u\n", spdif_priv->irq);
> + goto error_irqmap;
> + }
> +
> + spdif_priv->coreclk = devm_clk_get(&pdev->dev, NULL);
I'm not sure this is correct. You have not specified the order of clocks
in your DT bindings, so it is not guaranteed that "core" clock will be
always first.
IMHO it won't hurt to simply call devm_clk_get() with "core" as clock
name and will be much safer.
Best regards,
Tomasz
> + if (IS_ERR(spdif_priv->coreclk)) {
> + dev_err(&pdev->dev, "failed to get clock: %d\n", ret);
> + ret = PTR_ERR(spdif_priv->coreclk);
> + goto error_irqreq;
> + }
> +
> + spdif_priv->rxclk = devm_clk_get(&pdev->dev, "rx");
> + if (IS_ERR(spdif_priv->rxclk)) {
> + dev_warn(&pdev->dev, "using core clock as rx clk\n");
> + spdif_priv->rxclk = spdif_priv->coreclk;
> + }
> +
> + spdif_priv->txclk_main = devm_clk_get(&pdev->dev, "tx");
> + if (IS_ERR(spdif_priv->txclk_main)) {
> + dev_warn(&pdev->dev, "using core clock as tx clk\n");
> + spdif_priv->txclk_main = spdif_priv->coreclk;
> + }
> +
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++) {
> + spdif_priv->txclk[i] = devm_clk_get(&pdev->dev, rate[i]);
> + if (IS_ERR(spdif_priv->txclk[i])) {
> + dev_warn(&pdev->dev, "using tx clock as %s clk\n", rate[i]);
> + spdif_priv->txclk[i] = spdif_priv->txclk_main;
> + }
> + }
> +
> + spdif_clksrc_index_lookup(spdif_priv);
> +
> + /* We use regmap to control core clk, so no need to prepare it */
> + clk_prepare(spdif_priv->rxclk);
> + clk_prepare(spdif_priv->txclk_main);
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++)
> + clk_prepare(spdif_priv->txclk[i]);
> +
> + spdif_clk_cal_txdiv(spdif_priv);
> +
> + /* initial spinlock for control data */
> + ctrl = &spdif_priv->fsl_spdif_control;
> + spin_lock_init(&ctrl->ctl_lock);
> +
> + /* init tx channel status default value */
> + ctrl->ch_status[0] =
> + IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_5015;
> + ctrl->ch_status[1] = IEC958_AES1_CON_DIGDIGCONV_ID;
> + ctrl->ch_status[2] = 0x00;
> + ctrl->ch_status[3] =
> + IEC958_AES3_CON_FS_44100 | IEC958_AES3_CON_CLOCK_1000PPM;
> +
> + atomic_set(&spdif_priv->dpll_locked, 0);
> +
> + spdif_priv->dma_params_tx.maxburst = FSL_SPDIF_TXFIFO_WML;
> + spdif_priv->dma_params_rx.maxburst = FSL_SPDIF_RXFIFO_WML;
> + spdif_priv->dma_params_tx.addr = res.start + REG_SPDIF_STL;
> + spdif_priv->dma_params_rx.addr = res.start + REG_SPDIF_SRL;
> +
> + /* Register with ASoC */
> + dev_set_drvdata(&pdev->dev, spdif_priv);
> +
> + ret = snd_soc_register_component(&pdev->dev, &fsl_spdif_component,
> + &spdif_priv->cpu_dai_drv, 1);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register DAI: %d\n", ret);
> + goto error_dev;
> + }
> +
> + ret = imx_pcm_dma_init(pdev);
> + if (ret) {
> + dev_err(&pdev->dev, "imx_pcm_dma_init failed: %d\n", ret);
> + goto error_component;
> + }
> +
> + return ret;
> +
> +error_component:
> + snd_soc_unregister_component(&pdev->dev);
> +error_dev:
> + dev_set_drvdata(&pdev->dev, NULL);
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++)
> + clk_unprepare(spdif_priv->txclk[i]);
> + clk_unprepare(spdif_priv->txclk_main);
> + clk_unprepare(spdif_priv->rxclk);
> +error_irqreq:
> + free_irq(spdif_priv->irq, spdif_priv);
> +error_irqmap:
> + irq_dispose_mapping(spdif_priv->irq);
> +error_iomap:
> + iounmap(regs);
> +
> + return ret;
> +}
> +
> +static int fsl_spdif_remove(struct platform_device *pdev)
> +{
> + struct fsl_spdif_priv *spdif_priv = platform_get_drvdata(pdev);
> + int i;
> +
> + imx_pcm_dma_exit(pdev);
> + snd_soc_unregister_component(&pdev->dev);
> +
> + for (i = 0; i < SPDIF_TXRATE_MAX; i++)
> + clk_unprepare(spdif_priv->txclk[i]);
> + clk_unprepare(spdif_priv->txclk_main);
> + clk_unprepare(spdif_priv->rxclk);
> +
> + free_irq(spdif_priv->irq, spdif_priv);
> + irq_dispose_mapping(spdif_priv->irq);
> +
> + dev_set_drvdata(&pdev->dev, NULL);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id fsl_spdif_dt_ids[] = {
> + { .compatible = "fsl,imx35-spdif", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, fsl_spdif_dt_ids);
> +
> +static struct platform_driver fsl_spdif_driver = {
> + .driver = {
> + .name = "fsl-spdif-dai",
> + .owner = THIS_MODULE,
> + .of_match_table = fsl_spdif_dt_ids,
> + },
> + .probe = fsl_spdif_probe,
> + .remove = fsl_spdif_remove,
> +};
> +
> +module_platform_driver(fsl_spdif_driver);
> +
> +MODULE_AUTHOR("Freescale Semiconductor, Inc.");
> +MODULE_DESCRIPTION("Freescale S/PDIF CPU DAI Driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:fsl-spdif-dai");
> diff --git a/sound/soc/fsl/fsl_spdif.h b/sound/soc/fsl/fsl_spdif.h
> new file mode 100644
> index 0000000..df183fb
> --- /dev/null
> +++ b/sound/soc/fsl/fsl_spdif.h
> @@ -0,0 +1,224 @@
> +/*
> + * fsl_spdif.h - ALSA S/PDIF interface for the Freescale i.MX SoC
> + *
> + * Copyright (C) 2013 Freescale Semiconductor, Inc.
> + *
> + * Author: Nicolin Chen <b42378 at freescale.com>
> + *
> + * Based on fsl_ssi.h
> + * Author: Timur Tabi <timur at freescale.com>
> + * Copyright 2007-2008 Freescale Semiconductor, Inc.
> + *
> + * This file is licensed under the terms of the GNU General Public
> License + * version 2. This program is licensed "as is" without any
> warranty of any + * kind, whether express or implied.
> + */
> +
> +#ifndef _FSL_SPDIF_DAI_H
> +#define _FSL_SPDIF_DAI_H
> +
> +/* S/PDIF Register Map */
> +#define REG_SPDIF_SCR 0x0 /* SPDIF Configuration Register */
> +#define REG_SPDIF_SRCD 0x4 /* CDText Control Register */
> +#define REG_SPDIF_SRPC 0x8 /* PhaseConfig Register */
> +#define REG_SPDIF_SIE 0xc /* InterruptEn Register */
> +#define REG_SPDIF_SIS 0x10 /* InterruptStat Register */
> +#define REG_SPDIF_SIC 0x10 /* InterruptClear Register */
> +#define REG_SPDIF_SRL 0x14 /* SPDIFRxLeft Register */
> +#define REG_SPDIF_SRR 0x18 /* SPDIFRxRight Register */
> +#define REG_SPDIF_SRCSH 0x1c /* SPDIFRxCChannel_h Register */
> +#define REG_SPDIF_SRCSL 0x20 /* SPDIFRxCChannel_l Register */
> +#define REG_SPDIF_SRU 0x24 /* UchannelRx Register */
> +#define REG_SPDIF_SRQ 0x28 /* QchannelRx Register */
> +#define REG_SPDIF_STL 0x2C /* SPDIFTxLeft Register */
> +#define REG_SPDIF_STR 0x30 /* SPDIFTxRight Register */
> +#define REG_SPDIF_STCSCH 0x34 /* SPDIFTxCChannelCons_h Register */
> +#define REG_SPDIF_STCSCL 0x38 /* SPDIFTxCChannelCons_l Register */
> +#define REG_SPDIF_SRFM 0x44 /* FreqMeas Register */
> +#define REG_SPDIF_STC 0x50 /* SPDIFTxClk Register */
> +
> +
> +/* SPDIF Configuration register */
> +#define SCR_RXFIFO_CTL_OFFSET 23
> +#define SCR_RXFIFO_CTL_MASK (1 << SCR_RXFIFO_CTL_OFFSET)
> +#define SCR_RXFIFO_CTL_ZERO (1 << SCR_RXFIFO_CTL_OFFSET)
> +#define SCR_RXFIFO_OFF_OFFSET 22
> +#define SCR_RXFIFO_OFF_MASK (1 << SCR_RXFIFO_OFF_OFFSET)
> +#define SCR_RXFIFO_OFF (1 << SCR_RXFIFO_OFF_OFFSET)
> +#define SCR_RXFIFO_RST_OFFSET 21
> +#define SCR_RXFIFO_RST_MASK (1 << SCR_RXFIFO_RST_OFFSET)
> +#define SCR_RXFIFO_RST (1 << SCR_RXFIFO_RST_OFFSET)
> +#define SCR_RXFIFO_FSEL_OFFSET 19
> +#define SCR_RXFIFO_FSEL_MASK (0x3 << SCR_RXFIFO_FSEL_OFFSET)
> +#define SCR_RXFIFO_FSEL_IF0 (0x0 << SCR_RXFIFO_FSEL_OFFSET)
> +#define SCR_RXFIFO_FSEL_IF4 (0x1 << SCR_RXFIFO_FSEL_OFFSET)
> +#define SCR_RXFIFO_FSEL_IF8 (0x2 << SCR_RXFIFO_FSEL_OFFSET)
> +#define SCR_RXFIFO_FSEL_IF12 (0x3 << SCR_RXFIFO_FSEL_OFFSET)
> +#define SCR_RXFIFO_AUTOSYNC_OFFSET 18
> +#define SCR_RXFIFO_AUTOSYNC_MASK (1 << SCR_RXFIFO_AUTOSYNC_OFFSET)
> +#define SCR_RXFIFO_AUTOSYNC (1 << SCR_RXFIFO_AUTOSYNC_OFFSET)
> +#define SCR_TXFIFO_AUTOSYNC_OFFSET 17
> +#define SCR_TXFIFO_AUTOSYNC_MASK (1 << SCR_TXFIFO_AUTOSYNC_OFFSET)
> +#define SCR_TXFIFO_AUTOSYNC (1 << SCR_TXFIFO_AUTOSYNC_OFFSET)
> +#define SCR_TXFIFO_FSEL_OFFSET 15
> +#define SCR_TXFIFO_FSEL_MASK (0x3 << SCR_TXFIFO_FSEL_OFFSET)
> +#define SCR_TXFIFO_FSEL_IF0 (0x0 << SCR_TXFIFO_FSEL_OFFSET)
> +#define SCR_TXFIFO_FSEL_IF4 (0x1 << SCR_TXFIFO_FSEL_OFFSET)
> +#define SCR_TXFIFO_FSEL_IF8 (0x2 << SCR_TXFIFO_FSEL_OFFSET)
> +#define SCR_TXFIFO_FSEL_IF12 (0x3 << SCR_TXFIFO_FSEL_OFFSET)
> +#define SCR_LOW_POWER (1 << 13)
> +#define SCR_SOFT_RESET (1 << 12)
> +#define SCR_TXFIFO_CTRL_OFFSET 10
> +#define SCR_TXFIFO_CTRL_MASK (0x3 << SCR_TXFIFO_CTRL_OFFSET)
> +#define SCR_TXFIFO_CTRL_ZERO (0x0 << SCR_TXFIFO_CTRL_OFFSET)
> +#define SCR_TXFIFO_CTRL_NORMAL (0x1 << SCR_TXFIFO_CTRL_OFFSET)
> +#define SCR_TXFIFO_CTRL_ONESAMPLE (0x2 << SCR_TXFIFO_CTRL_OFFSET)
> +#define SCR_DMA_RX_EN_OFFSET 9
> +#define SCR_DMA_RX_EN_MASK (1 << SCR_DMA_RX_EN_OFFSET)
> +#define SCR_DMA_RX_EN (1 << SCR_DMA_RX_EN_OFFSET)
> +#define SCR_DMA_TX_EN_OFFSET 8
> +#define SCR_DMA_TX_EN_MASK (1 << SCR_DMA_TX_EN_OFFSET)
> +#define SCR_DMA_TX_EN (1 << SCR_DMA_TX_EN_OFFSET)
> +#define SCR_VAL_OFFSET 5
> +#define SCR_VAL_MASK (1 << SCR_VAL_OFFSET)
> +#define SCR_VAL_CLEAR (1 << SCR_VAL_OFFSET)
> +#define SCR_TXSEL_OFFSET 2
> +#define SCR_TXSEL_MASK (0x7 << SCR_TXSEL_OFFSET)
> +#define SCR_TXSEL_OFF (0 << SCR_TXSEL_OFFSET)
> +#define SCR_TXSEL_RX (1 << SCR_TXSEL_OFFSET)
> +#define SCR_TXSEL_NORMAL (0x5 << SCR_TXSEL_OFFSET)
> +#define SCR_USRC_SEL_OFFSET 0x0
> +#define SCR_USRC_SEL_MASK (0x3 << SCR_USRC_SEL_OFFSET)
> +#define SCR_USRC_SEL_NONE (0x0 << SCR_USRC_SEL_OFFSET)
> +#define SCR_USRC_SEL_RECV (0x1 << SCR_USRC_SEL_OFFSET)
> +#define SCR_USRC_SEL_CHIP (0x3 << SCR_USRC_SEL_OFFSET)
> +
> +/* SPDIF CDText control */
> +#define SRCD_CD_USER_OFFSET 1
> +#define SRCD_CD_USER (1 << SRCD_CD_USER_OFFSET)
> +
> +/* SPDIF Phase Configuration register */
> +#define SRPC_DPLL_LOCKED (1 << 6)
> +#define SRPC_CLKSRC_SEL_OFFSET 7
> +#define SRPC_CLKSRC_SEL_MASK (0xf << SRPC_CLKSRC_SEL_OFFSET)
> +#define SRPC_CLKSRC_SEL_SET(x) ((x << SRPC_CLKSRC_SEL_OFFSET) &
> SRPC_CLKSRC_SEL_MASK) +#define SRPC_CLKSRC_SEL_LOCKED_OFFSET1 5
> +#define SRPC_CLKSRC_SEL_LOCKED_OFFSET2 2
> +#define SRPC_GAINSEL_OFFSET 3
> +#define SRPC_GAINSEL_MASK (0x7 << SRPC_GAINSEL_OFFSET)
> +#define SRPC_GAINSEL_SET(x) ((x << SRPC_GAINSEL_OFFSET) &
> SRPC_GAINSEL_MASK) +
> +/* SPDIF rx clock source */
> +enum spdif_rxclk_src {
> + SRPC_CLKSRC_0 = 0,
> + SRPC_CLKSRC_1,
> + SRPC_CLKSRC_2,
> + SRPC_CLKSRC_3,
> + SRPC_CLKSRC_4,
> + SRPC_CLKSRC_5,
> + SRPC_CLKSRC_6,
> + SRPC_CLKSRC_7,
> + SRPC_CLKSRC_8,
> + SRPC_CLKSRC_9,
> + SRPC_CLKSRC_10,
> + SRPC_CLKSRC_11,
> + SRPC_CLKSRC_12,
> + SRPC_CLKSRC_13,
> + SRPC_CLKSRC_14,
> + SRPC_CLKSRC_15,
> +};
> +#define SRPC_CLKSRC_MAX (SRPC_CLKSRC_15 + 1)
> +#define DEFAULT_RXCLK_SRC SRPC_CLKSRC_0
> +
> +enum spdif_gainsel {
> + GAINSEL_MULTI_24 = 0,
> + GAINSEL_MULTI_16,
> + GAINSEL_MULTI_12,
> + GAINSEL_MULTI_8,
> + GAINSEL_MULTI_6,
> + GAINSEL_MULTI_4,
> + GAINSEL_MULTI_3,
> +};
> +#define GAINSEL_MULTI_MAX (GAINSEL_MULTI_3 + 1)
> +#define SPDIF_DEFAULT_GAINSEL GAINSEL_MULTI_8
> +
> +/* SPDIF interrupt mask define */
> +#define INT_DPLL_LOCKED (1 << 20)
> +#define INT_TXFIFO_UNOV (1 << 19)
> +#define INT_TXFIFO_RESYNC (1 << 18)
> +#define INT_CNEW (1 << 17)
> +#define INT_VAL_NOGOOD (1 << 16)
> +#define INT_SYM_ERR (1 << 15)
> +#define INT_BIT_ERR (1 << 14)
> +#define INT_URX_FUL (1 << 10)
> +#define INT_URX_OV (1 << 9)
> +#define INT_QRX_FUL (1 << 8)
> +#define INT_QRX_OV (1 << 7)
> +#define INT_UQ_SYNC (1 << 6)
> +#define INT_UQ_ERR (1 << 5)
> +#define INT_RXFIFO_UNOV (1 << 4)
> +#define INT_RXFIFO_RESYNC (1 << 3)
> +#define INT_LOSS_LOCK (1 << 2)
> +#define INT_TX_EM (1 << 1)
> +#define INT_RXFIFO_FUL (1 << 0)
> +
> +/* SPDIF Clock register */
> +#define STC_SYSCLK_DIV_OFFSET 11
> +#define STC_SYSCLK_DIV_MASK (0x1ff << STC_TXCLK_SRC_OFFSET)
> +#define STC_SYSCLK_DIV(x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) &
> STC_SYSCLK_DIV_MASK) +#define STC_TXCLK_SRC_OFFSET 8
> +#define STC_TXCLK_SRC_MASK (0x7 << STC_TXCLK_SRC_OFFSET)
> +#define STC_TXCLK_SRC_SET(x) ((x << STC_TXCLK_SRC_OFFSET) &
> STC_TXCLK_SRC_MASK) +#define STC_TXCLK_ALL_EN_OFFSET 7
> +#define STC_TXCLK_ALL_EN_MASK (1 << STC_TXCLK_ALL_EN_OFFSET)
> +#define STC_TXCLK_ALL_EN (1 << STC_TXCLK_ALL_EN_OFFSET)
> +#define STC_TXCLK_DIV_OFFSET 0
> +#define STC_TXCLK_DIV_MASK (0x7ff << STC_TXCLK_DIV_OFFSET)
> +#define STC_TXCLK_DIV(x) ((((x) - 1) << STC_TXCLK_DIV_OFFSET) &
> STC_TXCLK_DIV_MASK) +
> +/* SPDIF tx clksrc */
> +enum spdif_txclk_src {
> + STC_TXCLK_SRC_0 = 0,
> + STC_TXCLK_SRC_1,
> + STC_TXCLK_SRC_2,
> + STC_TXCLK_SRC_3,
> + STC_TXCLK_SRC_4,
> + STC_TXCLK_SRC_5,
> + STC_TXCLK_SRC_6,
> + STC_TXCLK_SRC_7,
> +};
> +#define STC_TXCLK_SRC_MAX (STC_TXCLK_SRC_7 + 1)
> +#define DEFAULT_TXCLK_SRC STC_TXCLK_SRC_1
> +
> +/* SPDIF tx rate */
> +enum spdif_txrate {
> + SPDIF_TXRATE_32000 = 0,
> + SPDIF_TXRATE_44100,
> + SPDIF_TXRATE_48000,
> +};
> +#define SPDIF_TXRATE_MAX (SPDIF_TXRATE_48000 + 1)
> +
> +
> +#define SPDIF_CSTATUS_BYTE 6
> +#define SPDIF_UBITS_SIZE 96
> +#define SPDIF_QSUB_SIZE (SPDIF_UBITS_SIZE / 8)
> +
> +
> +#define FSL_SPDIF_RATES_PLAYBACK (SNDRV_PCM_RATE_32000 | \
> + SNDRV_PCM_RATE_44100 | \
> + SNDRV_PCM_RATE_48000)
> +
> +#define FSL_SPDIF_RATES_CAPTURE (SNDRV_PCM_RATE_16000 | \
> + SNDRV_PCM_RATE_32000 | \
> + SNDRV_PCM_RATE_44100 | \
> + SNDRV_PCM_RATE_48000 | \
> + SNDRV_PCM_RATE_64000 | \
> + SNDRV_PCM_RATE_96000)
> +
> +#define FSL_SPDIF_FORMATS_PLAYBACK (SNDRV_PCM_FMTBIT_S16_LE | \
> + SNDRV_PCM_FMTBIT_S20_3LE | \
> + SNDRV_PCM_FMTBIT_S24_LE)
> +
> +#define FSL_SPDIF_FORMATS_CAPTURE (SNDRV_PCM_FMTBIT_S24_LE)
> +
> +#endif /* _FSL_SPDIF_DAI_H */
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20130815/4069de47/attachment-0001.sig>
More information about the Alsa-devel
mailing list