[alsa-devel] [PATCH v2 7/9] ALSA: usb-audio: remove is_playback from implicit feedback quirks
Eldad Zack
eldad at fogrefinery.com
Sat Aug 3 10:50:21 CEST 2013
An implicit feedback endpoint can only be a capture source. The
consumer (sink) of the implicit feedback endpoint is therefore limited
to playback EPs.
Check if the target endpoint is a playback first and remove redundant
checks.
Signed-off-by: Eldad Zack <eldad at fogrefinery.com>
---
sound/usb/pcm.c | 40 +++++++++++++++++++---------------------
1 file changed, 19 insertions(+), 21 deletions(-)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index bb2e0f5..af30e08 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -334,41 +334,39 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs,
{
struct usb_host_interface *alts;
struct usb_interface *iface;
- int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK;
int implicit_fb = 0;
unsigned int ep;
+ /* Implicit feedback sync EPs consumers are always playback EPs */
+ if (subs->direction != SNDRV_PCM_STREAM_PLAYBACK)
+ return 0;
+
switch (subs->stream->chip->usb_id) {
case USB_ID(0x0763, 0x2030): /* M-Audio Fast Track C400 */
case USB_ID(0x0763, 0x2031): /* M-Audio Fast Track C600 */
- if (is_playback) {
- implicit_fb = 1;
- ep = 0x81;
- iface = usb_ifnum_to_if(dev, 3);
+ implicit_fb = 1;
+ ep = 0x81;
+ iface = usb_ifnum_to_if(dev, 3);
- if (!iface || iface->num_altsetting == 0)
- return -EINVAL;
+ if (!iface || iface->num_altsetting == 0)
+ return -EINVAL;
- alts = &iface->altsetting[1];
- goto add_sync_ep;
- }
+ alts = &iface->altsetting[1];
+ goto add_sync_ep;
break;
case USB_ID(0x0763, 0x2080): /* M-Audio FastTrack Ultra */
case USB_ID(0x0763, 0x2081):
- if (is_playback) {
- implicit_fb = 1;
- ep = 0x81;
- iface = usb_ifnum_to_if(dev, 2);
+ implicit_fb = 1;
+ ep = 0x81;
+ iface = usb_ifnum_to_if(dev, 2);
- if (!iface || iface->num_altsetting == 0)
- return -EINVAL;
+ if (!iface || iface->num_altsetting == 0)
+ return -EINVAL;
- alts = &iface->altsetting[1];
- goto add_sync_ep;
- }
+ alts = &iface->altsetting[1];
+ goto add_sync_ep;
}
- if (is_playback &&
- attr == USB_ENDPOINT_SYNC_ASYNC &&
+ if (attr == USB_ENDPOINT_SYNC_ASYNC &&
altsd->bInterfaceClass == USB_CLASS_VENDOR_SPEC &&
altsd->bInterfaceProtocol == 2 &&
altsd->bNumEndpoints == 1 &&
--
1.8.1.5
More information about the Alsa-devel
mailing list