[alsa-devel] [FT C400, v2, RFC 3/8] usb-audio: use sender stride for implicit feedback

[Eldad Zack]

For implicit feedback endpoints, the number of bytes for each packet
is matched by the corresponding synchronizing endpoint.
The size is calculated by taking the actual size and dividing it by
the stride - currently by the endpoint's stride, but we should use the
synchronization source's stride.
This is evident when the number of channels differ between the
synchornization source and the implictly fed-back endpoint, as with
M-Audio Fast Track C400 - the synchonization source (capture) has
4 channels, while the implicit feedback mode endpoint has 6.

Signed-off-by: Eldad Zack <eldad at fogrefinery.com>
---
 sound/usb/endpoint.c |    9 ++++++---
 1 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 7f78c6d..e2317da 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -1021,15 +1021,18 @@ void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
 		/*
 		 * Iterate through the inbound packet and prepare the lengths
 		 * for the output packet. The OUT packet we are about to send
-		 * will have the same amount of payload bytes than the IN
-		 * packet we just received.
+		 * will have the same amount of payload bytes per stride as the
+		 * IN packet we just received. Since the actual size is scaled
+		 * by the stride, use the sender stride to calculate the length
+		 * in case the number of channels differ between the implicitly
+		 * fed-back endpoint and the synchronizing endpoint.
 		 */
 
 		out_packet->packets = in_ctx->packets;
 		for (i = 0; i < in_ctx->packets; i++) {
 			if (urb->iso_frame_desc[i].status == 0)
 				out_packet->packet_size[i] =
-					urb->iso_frame_desc[i].actual_length / ep->stride;
+					urb->iso_frame_desc[i].actual_length / sender->stride;
 			else
 				out_packet->packet_size[i] = 0;
 		}
-- 
1.7.8.6