[alsa-devel] [PATCH 5/9] ASoC: Only compile adav80x codec when a bus is defined

[Lars-Peter Clausen]

On 11/03/2012 11:02 PM, Lee Jones wrote:
> If !CONFIG_SPI and !CONFIG_I2C* then there is no point adding support
> for the adav80x codec as it relies on a bus to operate. This patch
> fixes the build warnings below when SPI and I2C are not specified in
> the configuration.
> 
> sound/soc/codecs/adav80x.c:842:22: warning: ‘adav80x_bus_probe’ defined but not used [-Wunused-function]
> sound/soc/codecs/adav80x.c:863:22: warning: ‘adav80x_bus_remove’ defined but not used [-Wunused-function]
> 
> Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
> Cc: alsa-devel at alsa-project.org
> Signed-off-by: Lee Jones <lee.jones at linaro.org>
> ---
>  sound/soc/codecs/Kconfig |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index b92759a..0d8135a 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -19,7 +19,7 @@ config SND_SOC_ALL_CODECS
>  	select SND_SOC_AD1980 if SND_SOC_AC97_BUS
>  	select SND_SOC_AD73311
>  	select SND_SOC_ADAU1373 if I2C
> -	select SND_SOC_ADAV80X
> +	select SND_SOC_ADAV80X if (I2C || I2C_MODULE || SPI_MASTER)

That should be 'if SND_SOC_I2C_AND_SPI', but otherwise agreed.

>  	select SND_SOC_ADS117X
>  	select SND_SOC_AK4104 if SPI_MASTER
>  	select SND_SOC_AK4535 if I2C