[alsa-devel] [PATCH V2 08/11] ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000

[Shawn Guo]

On Wed, May 09, 2012 at 07:33:07PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <richard.zhao at freescale.com>
> ---
>  arch/arm/boot/dts/imx6q-sabrelite.dts |   14 ++++++++++++++
>  1 files changed, 14 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
> index 5b51deb..5a35bfd 100644
> --- a/arch/arm/boot/dts/imx6q-sabrelite.dts
> +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
> @@ -110,4 +110,18 @@
>  			regulator-always-on;
>  		};
>  	};
> +
> +	sound {
> +		compatible = "fsl,imx6q-sabrelite-sgtl5000",
> +			     "fsl,imx-audio-sgtl5000";
> +		model = "imx6q-sabrelite-sgtl5000";
> +		ssi-controller = <&ssi1>;
> +		audio-codec = <&codec>;
> +		audio-routing =
> +			"MIC_IN", "Mic Jack",
> +			"Mic Jack", "Mic Bias",

"Mic Bias" is a SUPPLY for both "MIC_IN" and "Mic Jack", so it should
look like:

                       "Mic Jack", "Mic Bias",
                       "MIC_IN", "Mic Bias",

Regards,
Shawn

> +			"Headphone Jack", "HP_OUT";
> +		mux-int-port = <1>;
> +		mux-ext-port = <4>;
> +	};
>  };
> -- 
> 1.7.5.4
> 
>