[alsa-devel] [PATCH 2/2] ASoC: wm5100: Set the DAI base address in the DAI drivers

[Mark Brown]

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 sound/soc/codecs/wm5100.c |   26 +++++---------------------
 1 file changed, 5 insertions(+), 21 deletions(-)

diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c
index 7fbcd6d..1f13ccd 100644
--- a/sound/soc/codecs/wm5100.c
+++ b/sound/soc/codecs/wm5100.c
@@ -1342,29 +1342,12 @@ static const __devinitdata struct reg_default wm5100_reva_patches[] = {
 	{ WM5100_AUDIO_IF_3_19, 1 },
 };
 
-static int wm5100_dai_to_base(struct snd_soc_dai *dai)
-{
-	switch (dai->id) {
-	case 0:
-		return WM5100_AUDIO_IF_1_1 - 1;
-	case 1:
-		return WM5100_AUDIO_IF_2_1 - 1;
-	case 2:
-		return WM5100_AUDIO_IF_3_1 - 1;
-	default:
-		BUG();
-		return -EINVAL;
-	}
-}
-
 static int wm5100_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct snd_soc_codec *codec = dai->codec;
 	int lrclk, bclk, mask, base;
 
-	base = wm5100_dai_to_base(dai);
-	if (base < 0)
-		return base;
+	base = dai->driver->base;
 
 	lrclk = 0;
 	bclk = 0;
@@ -1491,9 +1474,7 @@ static int wm5100_hw_params(struct snd_pcm_substream *substream,
 	int i, base, bclk, aif_rate, lrclk, wl, fl, sr;
 	int *bclk_rates;
 
-	base = wm5100_dai_to_base(dai);
-	if (base < 0)
-		return base;
+	base = dai->driver->base;
 
 	/* Data sizes if not using TDM */
 	wl = snd_pcm_format_width(params_format(params));
@@ -1974,6 +1955,7 @@ static int wm5100_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 static struct snd_soc_dai_driver wm5100_dai[] = {
 	{
 		.name = "wm5100-aif1",
+		.base = WM5100_AUDIO_IF_1_1 - 1,
 		.playback = {
 			.stream_name = "AIF1 Playback",
 			.channels_min = 2,
@@ -1993,6 +1975,7 @@ static struct snd_soc_dai_driver wm5100_dai[] = {
 	{
 		.name = "wm5100-aif2",
 		.id = 1,
+		.base = WM5100_AUDIO_IF_2_1 - 1,
 		.playback = {
 			.stream_name = "AIF2 Playback",
 			.channels_min = 2,
@@ -2012,6 +1995,7 @@ static struct snd_soc_dai_driver wm5100_dai[] = {
 	{
 		.name = "wm5100-aif3",
 		.id = 2,
+		.base = WM5100_AUDIO_IF_3_1 - 1,
 		.playback = {
 			.stream_name = "AIF3 Playback",
 			.channels_min = 2,
-- 
1.7.10