[alsa-devel] [PATCH 7/8] sound:asoc: Add Kconfig and Makefile to support SPEAr audio driver

[Rajeev Kumar]

This patch add Kconfig and Makefile to support SPEAr Audio driver

Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar at st.com>
---
 sound/soc/spear/Kconfig  |   46 ++++++++++++++++++++++++++++++++++++++++++++++
 sound/soc/spear/Makefile |   16 ++++++++++++++++
 2 files changed, 62 insertions(+), 0 deletions(-)
 create mode 100644 sound/soc/spear/Kconfig
 create mode 100644 sound/soc/spear/Makefile

diff --git a/sound/soc/spear/Kconfig b/sound/soc/spear/Kconfig
new file mode 100644
index 0000000..4ab9154
--- /dev/null
+++ b/sound/soc/spear/Kconfig
@@ -0,0 +1,46 @@
+config SND_SOC_SPEAR_EVM
+	tristate "SoC Audio support for SPEAr EVM"
+	select SND_SOC_DESIGNWARE_I2S
+	select SND_SOC_STA529
+	select SND_SOC_SPEAR_PCM
+	help
+	 Say Y if you want to add support for SoC audio on SPEAr
+	 platform
+
+config SND_SOC_SPEAR1340_EVM
+	tristate "SoC Audio support for SPEAr1340 EVM"
+	select SND_SOC_DESIGNWARE_I2S
+	select SND_SOC_STA529
+	select SND_SOC_SPEAR_SPDIF_OUT
+	select SND_SOC_SPEAR_SPDIF_IN
+	select SND_SOC_SPDIF
+	select SND_SOC_SPEAR_PCM
+	help
+	 Say Y if you want to add support for SoC audio on SPEAr1340
+	 platform
+
+config SND_SOC_SPEAR_PCM
+	tristate "SoC Audio for the ST chip"
+	depends on SND_SOC_DESIGNWARE_I2S || SND_SOC_SPEAR_SPDIF_OUT || \
+		SND_SOC_SPEAR_SPDIF_IN
+	help
+	 Say Y or M if you want to add support for any of the audio
+	 controllers (I2S/SPDIF). You will also need to select
+	 the audio interface codecs to support below.
+
+config SND_SOC_DESIGNWARE_I2S
+	tristate "Synopsys I2S Device Driver"
+	help
+	 Say Y or M if you want to add support for I2S driver for
+	 Synopsys desigwnware I2S device. The device supports upto
+	 maximum of 8 channels each for play, record or both.
+
+config SND_SOC_SPEAR_SPDIF_OUT
+	tristate "SPEAr SPDIF Out Device Driver"
+	help
+	 Say Y or M if you want to add support for SPDIF OUT driver.
+
+config SND_SOC_SPEAR_SPDIF_IN
+	tristate "SPEAr SPDIF IN Device Driver"
+	help
+	 Say Y or M if you want to add support for SPDIF IN driver.
diff --git a/sound/soc/spear/Makefile b/sound/soc/spear/Makefile
new file mode 100644
index 0000000..bc49e75
--- /dev/null
+++ b/sound/soc/spear/Makefile
@@ -0,0 +1,16 @@
+# SPEAr Platform Support
+snd-soc-pcm-objs := spear_pcm.o
+snd-soc-i2s-objs := designware_i2s.o
+snd-soc-spdif-in-objs := spdif_in.o
+snd-soc-spdif-out-objs := spdif_out.o
+
+obj-$(CONFIG_SND_SOC_SPEAR_PCM) += snd-soc-pcm.o
+obj-$(CONFIG_SND_SOC_DESIGNWARE_I2S) += snd-soc-i2s.o
+obj-$(CONFIG_SND_SOC_SPEAR_SPDIF_IN) += snd-soc-spdif-in.o
+obj-$(CONFIG_SND_SOC_SPEAR_SPDIF_OUT) += snd-soc-spdif-out.o
+
+# SPEAr Machine Support
+snd-soc-evb-objs := spear_evb.o
+
+obj-$(CONFIG_SND_SOC_SPEAR_EVM) += snd-soc-evb.o
+obj-$(CONFIG_SND_SOC_SPEAR1340_EVM) += snd-soc-evb.o
-- 
1.7.2.2