[alsa-devel] [PATCH v3 11/11] ASoC: fsl: add imx-sgtl5000 machine driver
Shawn Guo
shawn.guo at linaro.org
Thu Mar 8 17:59:50 CET 2012
This is the initial imx-sgtl5000 machine driver support. It's a device
tree only machine driver working with fsl_ssi driver.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
.../bindings/sound/imx-audio-sgtl5000.txt | 24 +++
sound/soc/fsl/Kconfig | 12 ++
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/imx-sgtl5000.c | 177 ++++++++++++++++++++
4 files changed, 215 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
create mode 100644 sound/soc/fsl/imx-sgtl5000.c
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
new file mode 100644
index 0000000..421a374
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
@@ -0,0 +1,24 @@
+Freescale i.MX audio complex with SGTL5000 codec
+
+Required properties:
+- compatible : "fsl,imx-audio-sgtl5000"
+- model : The user-visible name of this sound complex
+- ssi-controller : The phandle of the i.MX SSI controller
+- audio-codec : The phandle of the SGTL5000 audio codec
+- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port : The external port of the i.MX audio muxer
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+ compatible = "fsl,imx51-babbage-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx51-babbage-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+};
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 535ee73..aa14fc9 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -164,4 +164,16 @@ config SND_SOC_EUKREA_TLV320
Enable I2S based access to the TLV320AIC23B codec attached
to the SSI interface
+config SND_SOC_IMX_SGTL5000
+ tristate "SoC Audio support for i.MX boards with sgtl5000"
+ depends on OF && I2C
+ select SND_SOC_SGTL5000
+ select SND_SOC_IMX_PCM_DMA
+ select SND_SOC_IMX_AUDMUX
+ select SND_SOC_FSL_SSI
+ select SND_SOC_FSL_UTILS
+ help
+ Say Y if you want to add support for SoC audio on an i.MX board with
+ a sgtl5000 codec.
+
endif # SND_IMX_SOC
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index fbdbed0..638d385 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -40,8 +40,10 @@ snd-soc-eukrea-tlv320-objs := eukrea-tlv320.o
snd-soc-phycore-ac97-objs := phycore-ac97.o
snd-soc-mx27vis-aic32x4-objs := mx27vis-aic32x4.o
snd-soc-wm1133-ev1-objs := wm1133-ev1.o
+snd-soc-imx-sgtl5000-objs := imx-sgtl5000.o
obj-$(CONFIG_SND_SOC_EUKREA_TLV320) += snd-soc-eukrea-tlv320.o
obj-$(CONFIG_SND_SOC_PHYCORE_AC97) += snd-soc-phycore-ac97.o
obj-$(CONFIG_SND_SOC_MX27VIS_AIC32X4) += snd-soc-mx27vis-aic32x4.o
obj-$(CONFIG_SND_MXC_SOC_WM1133_EV1) += snd-soc-wm1133-ev1.o
+obj-$(CONFIG_SND_SOC_IMX_SGTL5000) += snd-soc-imx-sgtl5000.o
diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c
new file mode 100644
index 0000000..3786b61
--- /dev/null
+++ b/sound/soc/fsl/imx-sgtl5000.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <sound/soc.h>
+
+#include "../codecs/sgtl5000.h"
+#include "imx-audmux.h"
+
+#define DAI_NAME_SIZE 32
+
+struct imx_sgtl5000_data {
+ struct snd_soc_dai_link dai;
+ struct snd_soc_card card;
+ char codec_dai_name[DAI_NAME_SIZE];
+ char platform_name[DAI_NAME_SIZE];
+ unsigned int clk_frequency;
+};
+
+static int imx_sgtl5000_dai_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct imx_sgtl5000_data *data = container_of(rtd->card,
+ struct imx_sgtl5000_data, card);
+ struct device *dev = rtd->card->dev;
+ int ret;
+
+ ret = snd_soc_dai_set_sysclk(rtd->codec_dai, SGTL5000_SYSCLK,
+ data->clk_frequency, SND_SOC_CLOCK_IN);
+ if (ret) {
+ dev_err(dev, "could not set codec driver clock params\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit imx_sgtl5000_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *ssi_np, *codec_np;
+ struct platform_device *ssi_pdev;
+ struct imx_sgtl5000_data *data;
+ int int_port, ext_port;
+ int ret;
+
+ ret = of_property_read_u32(np, "mux-int-port", &int_port);
+ if (ret) {
+ dev_err(&pdev->dev, "mux-int-port missing or invalid\n");
+ return ret;
+ }
+ ret = of_property_read_u32(np, "mux-ext-port", &ext_port);
+ if (ret) {
+ dev_err(&pdev->dev, "mux-ext-port missing or invalid\n");
+ return ret;
+ }
+
+ /*
+ * The port numbering in the hardware manual starts at 1, while
+ * the audmux API expects it starts at 0.
+ */
+ int_port--;
+ ext_port--;
+ ret = imx_audmux_v2_configure_port(int_port,
+ IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSEL(ext_port) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(ext_port) |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR,
+ IMX_AUDMUX_V2_PDCR_RXDSEL(ext_port));
+ if (ret) {
+ dev_err(&pdev->dev, "audmux internal port setup failed\n");
+ return ret;
+ }
+ imx_audmux_v2_configure_port(ext_port,
+ IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TCSEL(int_port),
+ IMX_AUDMUX_V2_PDCR_RXDSEL(int_port));
+ if (ret) {
+ dev_err(&pdev->dev, "audmux external port setup failed\n");
+ return ret;
+ }
+
+ ssi_np = of_parse_phandle(pdev->dev.of_node, "ssi-controller", 0);
+ codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0);
+ if (!ssi_np || !codec_np) {
+ dev_err(&pdev->dev, "phandle missing or invalid\n");
+ return -EINVAL;
+ }
+
+ ssi_pdev = of_find_device_by_node(ssi_np);
+ if (!ssi_pdev) {
+ dev_err(&pdev->dev, "failed to find SSI platform device\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(codec_np, "clock-frequency",
+ &data->clk_frequency);
+ if (ret) {
+ dev_err(&pdev->dev, "clock-frequency missing or invalid\n");
+ return ret;
+ }
+
+ data->dai.name = "HiFi";
+ data->dai.stream_name = "HiFi";
+ data->dai.codec_dai_name = "sgtl5000";
+ data->dai.codec_of_node = codec_np;
+ data->dai.cpu_dai_name = dev_name(&ssi_pdev->dev);
+ data->dai.platform_name = "imx-pcm-audio";
+ data->dai.init = &imx_sgtl5000_dai_init;
+ data->dai.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM;
+
+ data->card.dev = &pdev->dev;
+ ret = snd_soc_of_parse_card_name(&data->card, "model");
+ if (ret)
+ return ret;
+ data->card.num_links = 1;
+ data->card.dai_link = &data->dai;
+
+ ret = snd_soc_register_card(&data->card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, data);
+ of_node_put(ssi_np);
+ of_node_put(codec_np);
+
+ return 0;
+}
+
+static int __devexit imx_sgtl5000_remove(struct platform_device *pdev)
+{
+ struct imx_sgtl5000_data *data = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(&data->card);
+
+ return 0;
+}
+
+static const struct of_device_id imx_sgtl5000_dt_ids[] = {
+ { .compatible = "fsl,imx-audio-sgtl5000", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx_sgtl5000_dt_ids);
+
+static struct platform_driver imx_sgtl5000_driver = {
+ .driver = {
+ .name = "imx-sgtl5000",
+ .owner = THIS_MODULE,
+ .of_match_table = imx_sgtl5000_dt_ids,
+ },
+ .probe = imx_sgtl5000_probe,
+ .remove = __devexit_p(imx_sgtl5000_remove),
+};
+module_platform_driver(imx_sgtl5000_driver);
+
+MODULE_AUTHOR("Shawn Guo <shawn.guo at linaro.org>");
+MODULE_DESCRIPTION("Freescale i.MX SGTL5000 ASoC machine driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:imx-sgtl5000");
--
1.7.5.4
More information about the Alsa-devel
mailing list