[alsa-devel] [PATCH V2 8/9] sound:asoc: Add Kconfig and Makefile to support SPEAr audio driver
Rajeev Kumar
rajeev-dlh.kumar at st.com
Thu Jun 21 12:24:56 CEST 2012
This patch add Kconfig and Makefile to support SPEAr Audio driver
Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar at st.com>
---
sound/soc/spear/Kconfig | 40 ++++++++++++++++++++++++++++++++++++++++
sound/soc/spear/Makefile | 7 +++++++
2 files changed, 47 insertions(+), 0 deletions(-)
create mode 100644 sound/soc/spear/Kconfig
create mode 100644 sound/soc/spear/Makefile
diff --git a/sound/soc/spear/Kconfig b/sound/soc/spear/Kconfig
new file mode 100644
index 0000000..23529a2
--- /dev/null
+++ b/sound/soc/spear/Kconfig
@@ -0,0 +1,40 @@
+config SND_SPEAR_EVM
+ tristate "SoC Audio support for SPEAr EVM"
+ select SND_DESIGNWARE_I2S
+ select SND_SOC_STA529
+ select SND_SPEAR_SOC
+ help
+ Say Y if you want to add support for SoC audio on SPEAr
+ platform
+
+config SND_SPEAR1340_EVM
+ tristate "SoC Audio support for SPEAr1340 EVM"
+ select SND_DESIGNWARE_I2S
+ select SND_SOC_STA529
+ select SND_SPEAR_SPDIF_OUT
+ select SND_SPEAR_SPDIF_IN
+ select SND_SOC_SPDIF
+ select SND_SPEAR_SOC
+ help
+ Say Y if you want to add support for SoC audio on SPEAr1340
+ platform
+
+config SND_SPEAR_SOC
+ tristate "SoC Audio for the ST chip"
+ depends on SND_DESIGNWARE_I2S || SND_SPEAR_SPDIF_OUT || \
+ SND_SPEAR_SPDIF_IN
+ select SND_SOC_DMAENGINE_PCM
+ help
+ Say Y or M if you want to add support for any of the audio
+ controllers (I2S/SPDIF). You will also need to select
+ the audio interface codecs to support below.
+
+config SND_SPEAR_SPDIF_OUT
+ tristate "SPEAr SPDIF Out Device Driver"
+ help
+ Say Y or M if you want to add support for SPDIF OUT driver.
+
+config SND_SPEAR_SPDIF_IN
+ tristate "SPEAr SPDIF IN Device Driver"
+ help
+ Say Y or M if you want to add support for SPDIF IN driver.
diff --git a/sound/soc/spear/Makefile b/sound/soc/spear/Makefile
new file mode 100644
index 0000000..b365126
--- /dev/null
+++ b/sound/soc/spear/Makefile
@@ -0,0 +1,7 @@
+# SPEAR Platform Support
+obj-$(CONFIG_SND_SPEAR_SOC) += spear_pcm.o
+obj-$(CONFIG_SND_SPEAR_SPDIF_IN) += spdif_in.o
+obj-$(CONFIG_SND_SPEAR_SPDIF_OUT) += spdif_out.o
+
+# SPEAR Machine Support
+obj-$(CONFIG_SND_SPEAR_EVM) += spear_evb.o
--
1.7.0.4
More information about the Alsa-devel
mailing list