[alsa-devel] [PATCH v2 4/4] ASoC: omap-abe-twl6040: Add device tree support
Peter Ujfalusi
peter.ujfalusi at ti.com
Tue Jun 5 15:06:01 CEST 2012
Hi Mark, Liam,
On 05/16/2012 02:57 PM, Peter Ujfalusi wrote:
> When the board boots with device tree the driver will receive the name of the
> card, DAPM routing map, phandle for the audio components described in the dts
> file, mclk speed, and the possibility of detecting the jack detection.
>
> The card will be set up based on this information.
> Since the routing is provided via DT we can mark the card fully routed so
> core can take care of disconnecting the unused pins.
Would you be able to take a look at this patch? The rest of the series has
been already applied for 3.5 but this somehow missed the review.
Thank you,
Péter
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
> ---
> .../devicetree/bindings/sound/omap-abe-twl6040.txt | 91 ++++++++++++
> sound/soc/omap/omap-abe-twl6040.c | 145 ++++++++++++++++----
> 2 files changed, 206 insertions(+), 30 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
> new file mode 100644
> index 0000000..65dec87
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
> @@ -0,0 +1,91 @@
> +* Texas Instruments OMAP4+ and twl6040 based audio setups
> +
> +Required properties:
> +- compatible: "ti,abe-twl6040"
> +- ti,model: Name of the sound card ( for example "SDP4430")
> +- ti,mclk-freq: MCLK frequency for HPPLL operation
> +- ti,mcpdm: phandle for the McPDM node
> +- ti,twl6040: phandle for the twl6040 core node
> +- ti,audio-routing: List of connections between audio components.
> + Each entry is a pair of strings, the first being the connection's sink,
> + the second being the connection's source.
> +
> +Optional properties:
> +- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
> +- ti,jack_detection: Need to be set to <1> if the board capable to detect jack
> + insertion, removal.
> +
> +Available audio endpoints for the audio-routing table:
> +
> +Board connectors:
> + * Headset Stereophone
> + * Earphone Spk
> + * Ext Spk
> + * Line Out
> + * Vibrator
> + * Headset Mic
> + * Main Handset Mic
> + * Sub Handset Mic
> + * Line In
> + * Digital Mic
> +
> +twl6040 pins:
> + * HSOL
> + * HSOR
> + * EP
> + * HFL
> + * HFR
> + * AUXL
> + * AUXR
> + * VIBRAL
> + * VIBRAR
> + * HSMIC
> + * MAINMIC
> + * SUBMIC
> + * AFML
> + * AFMR
> +
> + * Headset Mic Bias
> + * Main Mic Bias
> + * Digital Mic1 Bias
> + * Digital Mic2 Bias
> +
> +Digital mic pins:
> + * DMic
> +
> +Example:
> +
> +sound {
> + compatible = "ti,abe-twl6040";
> + ti,model = "SDP4430";
> +
> + ti,jack-detection = <1>;
> + ti,mclk-freq = <38400000>;
> +
> + ti,mcpdm = <&mcpdm>;
> + ti,dmic = <&dmic>;
> +
> + ti,twl6040 = <&twl6040>;
> +
> + /* Audio routing */
> + ti,audio-routing =
> + "Headset Stereophone", "HSOL",
> + "Headset Stereophone", "HSOR",
> + "Earphone Spk", "EP",
> + "Ext Spk", "HFL",
> + "Ext Spk", "HFR",
> + "Line Out", "AUXL",
> + "Line Out", "AUXR",
> + "Vibrator", "VIBRAL",
> + "Vibrator", "VIBRAR",
> + "HSMIC", "Headset Mic",
> + "Headset Mic", "Headset Mic Bias",
> + "MAINMIC", "Main Handset Mic",
> + "Main Handset Mic", "Main Mic Bias",
> + "SUBMIC", "Sub Handset Mic",
> + "Sub Handset Mic", "Main Mic Bias",
> + "AFML", "Line In",
> + "AFMR", "Line In",
> + "DMic", "Digital Mic",
> + "Digital Mic", "Digital Mic1 Bias";
> +};
> diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c
> index 9d93793..1995a7f 100644
> --- a/sound/soc/omap/omap-abe-twl6040.c
> +++ b/sound/soc/omap/omap-abe-twl6040.c
> @@ -25,6 +25,7 @@
> #include <linux/mfd/twl6040.h>
> #include <linux/platform_data/omap-abe-twl6040.h>
> #include <linux/module.h>
> +#include <linux/of.h>
>
> #include <sound/core.h>
> #include <sound/pcm.h>
> @@ -43,6 +44,8 @@
> struct abe_twl6040 {
> int jack_detection; /* board can detect jack events */
> int mclk_freq; /* MCLK frequency speed for twl6040 */
> +
> + struct platform_device *dmic_codec_dev;
> };
>
> static int omap_abe_hw_params(struct snd_pcm_substream *substream,
> @@ -185,17 +188,6 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd)
> int hs_trim;
> int ret = 0;
>
> - /* Disable not connected paths if not used */
> - twl6040_disconnect_pin(dapm, pdata->has_hs, "Headset Stereophone");
> - twl6040_disconnect_pin(dapm, pdata->has_hf, "Ext Spk");
> - twl6040_disconnect_pin(dapm, pdata->has_ep, "Earphone Spk");
> - twl6040_disconnect_pin(dapm, pdata->has_aux, "Line Out");
> - twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vinrator");
> - twl6040_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic");
> - twl6040_disconnect_pin(dapm, pdata->has_mainmic, "Main Handset Mic");
> - twl6040_disconnect_pin(dapm, pdata->has_submic, "Sub Handset Mic");
> - twl6040_disconnect_pin(dapm, pdata->has_afm, "Line In");
> -
> /*
> * Configure McPDM offset cancellation based on the HSOTRIM value from
> * twl6040.
> @@ -216,6 +208,24 @@ static int omap_abe_twl6040_init(struct snd_soc_pcm_runtime *rtd)
> twl6040_hs_jack_detect(codec, &hs_jack, SND_JACK_HEADSET);
> }
>
> + /*
> + * NULL pdata means we booted with DT. In this case the routing is
> + * provided and the card is fully routed, no need to mark pins.
> + */
> + if (!pdata)
> + return ret;
> +
> + /* Disable not connected paths if not used */
> + twl6040_disconnect_pin(dapm, pdata->has_hs, "Headset Stereophone");
> + twl6040_disconnect_pin(dapm, pdata->has_hf, "Ext Spk");
> + twl6040_disconnect_pin(dapm, pdata->has_ep, "Earphone Spk");
> + twl6040_disconnect_pin(dapm, pdata->has_aux, "Line Out");
> + twl6040_disconnect_pin(dapm, pdata->has_vibra, "Vinrator");
> + twl6040_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic");
> + twl6040_disconnect_pin(dapm, pdata->has_mainmic, "Main Handset Mic");
> + twl6040_disconnect_pin(dapm, pdata->has_submic, "Sub Handset Mic");
> + twl6040_disconnect_pin(dapm, pdata->has_afm, "Line In");
> +
> return ret;
> }
>
> @@ -270,52 +280,116 @@ static struct snd_soc_card omap_abe_card = {
> static __devinit int omap_abe_probe(struct platform_device *pdev)
> {
> struct omap_abe_twl6040_data *pdata = dev_get_platdata(&pdev->dev);
> + struct device_node *node = pdev->dev.of_node;
> struct snd_soc_card *card = &omap_abe_card;
> struct abe_twl6040 *priv;
> int num_links = 0;
> - int ret;
> + int ret = 0;
>
> card->dev = &pdev->dev;
>
> - if (!pdata) {
> - dev_err(&pdev->dev, "Missing pdata\n");
> - return -ENODEV;
> - }
> -
> priv = devm_kzalloc(&pdev->dev, sizeof(struct abe_twl6040), GFP_KERNEL);
> if (priv == NULL)
> return -ENOMEM;
>
> - if (pdata->card_name) {
> - card->name = pdata->card_name;
> + priv->dmic_codec_dev = ERR_PTR(-EINVAL);
> +
> + if (node) {
> + struct device_node *dai_node;
> +
> + if (snd_soc_of_parse_card_name(card, "ti,model")) {
> + dev_err(&pdev->dev, "Card name is not provided\n");
> + return -ENODEV;
> + }
> +
> + ret = snd_soc_of_parse_audio_routing(card,
> + "ti,audio-routing");
> + if (ret) {
> + dev_err(&pdev->dev,
> + "Error while parsing DAPM routing\n");
> + return -EINVAL;
> + }
> +
> + dai_node = of_parse_phandle(node, "ti,mcpdm", 0);
> + if (!dai_node) {
> + dev_err(&pdev->dev, "McPDM node is not provided\n");
> + return -EINVAL;
> + }
> + abe_twl6040_dai_links[0].cpu_dai_name = NULL;
> + abe_twl6040_dai_links[0].cpu_dai_of_node = dai_node;
> +
> + dai_node = of_parse_phandle(node, "ti,dmic", 0);
> + if (dai_node) {
> + num_links = 2;
> + abe_twl6040_dai_links[1].cpu_dai_name = NULL;
> + abe_twl6040_dai_links[1].cpu_dai_of_node = dai_node;
> +
> + priv->dmic_codec_dev = platform_device_register_simple(
> + "dmic-codec", -1, NULL, 0);
> + if (IS_ERR(priv->dmic_codec_dev)) {
> + dev_err(&pdev->dev,
> + "Can't instantiate dmic-codec\n");
> + return PTR_ERR(priv->dmic_codec_dev);
> + }
> + } else {
> + num_links = 1;
> + }
> +
> + of_property_read_u32(node, "ti,jack-detection",
> + &priv->jack_detection);
> + of_property_read_u32(node, "ti,mclk-freq",
> + &priv->mclk_freq);
> + if (!priv->mclk_freq) {
> + dev_err(&pdev->dev, "MCLK frequency not provided\n");
> + ret = -EINVAL;
> + goto err_unregister;
> + }
> +
> + omap_abe_card.fully_routed = 1;
> + } else if (pdata) {
> + if (pdata->card_name) {
> + card->name = pdata->card_name;
> + } else {
> + dev_err(&pdev->dev, "Card name is not provided\n");
> + return -ENODEV;
> + }
> +
> + if (pdata->has_dmic)
> + num_links = 2;
> + else
> + num_links = 1;
> +
> + priv->jack_detection = pdata->jack_detection;
> + priv->mclk_freq = pdata->mclk_freq;
> } else {
> - dev_err(&pdev->dev, "Card name is not provided\n");
> + dev_err(&pdev->dev, "Missing pdata\n");
> return -ENODEV;
> }
>
> - priv->jack_detection = pdata->jack_detection;
> - priv->mclk_freq = pdata->mclk_freq;
> -
>
> if (!priv->mclk_freq) {
> dev_err(&pdev->dev, "MCLK frequency missing\n");
> - return -ENODEV;
> + ret = -ENODEV;
> + goto err_unregister;
> }
>
> - if (pdata->has_dmic)
> - num_links = 2;
> - else
> - num_links = 1;
> -
> card->dai_link = abe_twl6040_dai_links;
> card->num_links = num_links;
>
> snd_soc_card_set_drvdata(card, priv);
>
> ret = snd_soc_register_card(card);
> - if (ret)
> + if (ret) {
> dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
> ret);
> + goto err_unregister;
> + }
> +
> + return 0;
> +
> +err_unregister:
> + if (!IS_ERR(priv->dmic_codec_dev))
> + platform_device_unregister(priv->dmic_codec_dev);
>
> return ret;
> }
> @@ -323,17 +397,28 @@ static __devinit int omap_abe_probe(struct platform_device *pdev)
> static int __devexit omap_abe_remove(struct platform_device *pdev)
> {
> struct snd_soc_card *card = platform_get_drvdata(pdev);
> + struct abe_twl6040 *priv = snd_soc_card_get_drvdata(card);
>
> snd_soc_unregister_card(card);
>
> + if (!IS_ERR(priv->dmic_codec_dev))
> + platform_device_unregister(priv->dmic_codec_dev);
> +
> return 0;
> }
>
> +static const struct of_device_id omap_abe_of_match[] = {
> + {.compatible = "ti,abe-twl6040", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, omap_abe_of_match);
> +
> static struct platform_driver omap_abe_driver = {
> .driver = {
> .name = "omap-abe-twl6040",
> .owner = THIS_MODULE,
> .pm = &snd_soc_pm_ops,
> + .of_match_table = omap_abe_of_match,
> },
> .probe = omap_abe_probe,
> .remove = __devexit_p(omap_abe_remove),
More information about the Alsa-devel
mailing list