[alsa-devel] [PATCH 2/2] ALSA: ASoC: Add reset-gpio DT property to cs4270 driver

[Daniel Mack]

In the process of moving over from static board files to the device
tree, reset pins of peripheral reset pins should be handled by their
corresponding drivers.

Add a reset-gpio DT property to the cs4270 driver, and de-assert it
before probing the chip. The logic could be augmented some day to
re-assert it when codec is put to suspend.

Signed-off-by: Daniel Mack <zonque at gmail.com>
Cc: Timur Tabi <timur at freescale.com>
---
 Documentation/devicetree/bindings/sound/cs4270.txt |    5 +++++
 sound/soc/codecs/cs4270.c                          |   16 ++++++++++++++++
 2 files changed, 21 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt
index 7f0bfd8..6b222f9 100644
--- a/Documentation/devicetree/bindings/sound/cs4270.txt
+++ b/Documentation/devicetree/bindings/sound/cs4270.txt
@@ -8,6 +8,11 @@ Required properties:
 
   - reg : the I2C address of the device for I2C
 
+Optional properties:
+
+  - reset-gpio : a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
 Example:
 
 codec: cs4270 at 48 {
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 4b71b01..7d206be 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -30,6 +30,7 @@
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 
 /*
  * The codec isn't really big-endian or little-endian, since the I2S
@@ -660,9 +661,24 @@ MODULE_DEVICE_TABLE(of, cs4270_of_match);
 static int cs4270_i2c_probe(struct i2c_client *i2c_client,
 	const struct i2c_device_id *id)
 {
+	struct device_node *np = i2c_client->dev.of_node;
 	struct cs4270_private *cs4270;
 	int ret;
 
+	/* See if we way to bring the codec out of reset */
+	if (np) {
+		enum of_gpio_flags reset_gpio_flags;
+		int reset_gpio = of_get_named_gpio_flags(np, "reset-gpio", 0,
+							 &reset_gpio_flags);
+
+		if (devm_gpio_request_one(&i2c_client->dev, reset_gpio,
+				     reset_gpio_flags & OF_GPIO_ACTIVE_LOW ?
+					GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH,
+				     "cs4270 reset") < 0) {
+			reset_gpio = -EINVAL;
+		}
+	}
+
 	/* Verify that we have a CS4270 */
 
 	ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
-- 
1.7.10.4