[alsa-devel] duplicated test in sound/soc/codecs/sgtl5000.c

[Zeng Zhaoming]

On Fri 2012-01-13 06:21:00, Dong Aisheng-B29396 wrote:
> > -----Original Message-----
> > From: Mark Brown [mailto:broonie at opensource.wolfsonmicro.com]
> > Sent: Friday, January 13, 2012 6:28 AM
> > To: Julia Lawall; Fabio Estevam; Wolfram Sang; Dong Aisheng-B29396; Shawn Guo
> > Cc: lrg at ti.com; alsa-devel at alsa-project.org
> > Subject: Re: duplicated test in sound/soc/codecs/sgtl5000.c
> > Importance: High
> > 
> > On Thu, Jan 12, 2012 at 10:13:24PM +0100, Julia Lawall wrote:
> > > There is a duplicated test in the function sgtl5000_restore_regs in
> > > the file sound/soc/codecs/sgtl5000.c:
> > 
> > >                /* this regs depends on the others */
> > >                 if (reg == SGTL5000_CHIP_ANA_POWER ||
> > >                         reg == SGTL5000_CHIP_CLK_CTRL ||
> > >                         reg == SGTL5000_CHIP_LINREG_CTRL ||
> > >                         reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
> > >                         reg == SGTL5000_CHIP_CLK_CTRL)
> > >                         continue;
> > 
> > > I don't know if some constant other than SGTL5000_CHIP_CLK_CTRL should
> > > be tested, or if the second test should just be deleted.
> > 
> > Adding the people who've been working on the driver.  Generally this is a good
> > idea when reporting issues like this.
> Cc Zhaoming.
> 
> Looking at the code, I guess it's a typo error and the second check should be
> SGTL5000_CHIP_REF_CTRL since it will restore it again.

Hi, Aisheng and Julia:
    Yes, a typo, I will send patch to correct it.

    And Julia, the five regs list there since it should be restore in a particular
order, the order is:
    1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after 
    SGTL5000_CHIP_ANA_POWER PLL bits set.
    2. SGTL5000_CHIP_LINREG_CTRL should be set before SGTL5000_CHIP_ANA_POWER LINREG_D
     restored.
    3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage, I prefer to resotre it
    after SGTL5000_CHIP_ANA_POWER restored.
    4. for SGTL5000_CHIP_LINE_OUT_CTRL, I forget the real reason, Aisheng, can you help
    verify line-out if remove it?
> 
> Hi Mark,
> Since zhaoming leaved Freescale a few month ago,
> would you mind if I send a patch to add my name under MODULE_AHTOER as
> Co-maintainer for this driver and update Zhaoming's email address?
> 
> Regards
> Dong Aisheng