[alsa-devel] [PATCH 4/4] snd-usb-6fire: add analog input volume control

[Torsten Schenk]

> >  static struct __devinitdata snd_kcontrol_new elements[] = {
> > @@ -442,6 +497,15 @@
> >  		.get = usb6fire_control_digital_thru_get,
> >  		.put = usb6fire_control_digital_thru_put
> >  	},
> > +	{
> > +		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
> > +		.name = "Input 1/2 Capture Volume",
> > +		.index = 0,
> 
> If this is the only volume element, you don't need to add "1/2", no?

The problem is, that there is only an input control for 2 out of 4
analog input channels since channel 3 and 4 use a different ADC and
there doesn't seem to be a volume control on that chip. Since this
control only changes volume of channel 1 and 2, I wanted to have an
indication about that.

Thanks,
Torsten