[alsa-devel] multiple, non-physically accesible, HDMI devices listed for Intel IbexPeak ALC269VB
Takashi Iwai
tiwai at suse.de
Wed Feb 22 08:44:06 CET 2012
At Wed, 22 Feb 2012 01:43:44 -0500,
Andres Cimmarusti wrote:
>
> [1 <text/plain; UTF-8 (7bit)>]
> Dear Mr. Warren,
>
> I recently upgraded my laptop to Debian testing (from Debian stable +
> the longterm stable 3.0.x kernel). The newer kernel 3.2.x came with a
> regression that git bisect has traced down to one of your commits in
> the early 3.1.x kernel development stage (git bisect output and git
> bisect log attached).
>
> Under kernel 3.0.x HDMI sound works out-of-the-box as tested with
> pulse audio (choosing the option Digital
> Stereo (HDMI) Output) and by the command:
>
> $ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
>
> Alsa's device list reveals:
>
> $ aplay -l
> **** List of PLAYBACK Hardware Devices ****
> card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog]
> Subdevices: 0/1
> Subdevice #0: subdevice #0
> card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
> Unfortunately with kernel 3.2.x and 3.1.x I get no sound out choosing the same
> configuration in pulseaudio. Device is advertised correctly but
> there's a bizarre multiplicity advertised:
>
> $ aplay -l
> **** List of PLAYBACK Hardware Devices ****
> card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: Intel [HDA Intel], device 7: HDMI 1 [HDMI 1]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: Intel [HDA Intel], device 8: HDMI 2 [HDMI 2]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
> Using aplay with device 3 says device is busy. Device 7 works
> correctly (but is not available in pulseaudio unless forced by
> default, which then renders internal speakers disabled) and device 8
> produces no sound out.
>
> This appears to be a regression in the kernel about this device,
> advertising non-physically connected HDMI sound devices that cause
> pulse audio to get
> confused (Pulseaudio only seems to be able to handle one HDMI output
> by default device 0,3).
The biggest problem is that PA checks only the first HDMI device.
In that sense, this is no regression in the kernel side, although I
know it's annoying.
If the new two pins can be never used, i.e. physically unreachable,
we may disable these pins by giving the proper default pin-config
values. Usually it's a job of BIOS. But if BIOS doesn't do it, user
need to do it manually.
Build your kernel with CONFIG_SND_HDA_HWDEP=y,
CONFIG_SND_HDA_RECONFIG=y, CONFIG_SND_HDA_PATCH_LOADER=y.
I guess most of distro kernels are built with them.
Then create a file containing below in /lib/firmware, such as,
/lib/firmware/ibx-hdmi:
================================================================
[codec]
0x80862804 0x80860101 3
[pincfg]
0x04 0x411111f0
0x06 0x411111f0
================================================================
Now pass this file to "patch" module option for snd-hda-intel.
For example, create a file in /etc/modprobe.d/,
e.g. /etc/modprobe.d/50-hdmi.conf, containing the line
options snd-hda-intel patch="ibx-hdmi"
Then reload the driver or reboot. This will disable pins 0x04 and
0x06 so that only the pin 0x05 will be used.
Takashi
>
> Output of the alsa-info script for kernel 3.0.20 and 3.2.4 is attached.
>
> Can you please advice how to fix this problem? I see there was a patch
> about the same time meant to address the multiplicity of port
> advertised and restrict to the ones being used, but this doesn't seem
> to be working here (see
> http://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=commit;h=0b6c49b59fb272c1a20f79202693ed1072e9548c)
>
> For reference, this is the original Debian bug report:
> http://bugs.debian.org/660111
>
> Best Regards,
>
> Andres Cimmarusti
> [2 git_bisect_1st_bad.txt <text/plain; US-ASCII (base64)>]
> 384a48d71520ca569a63f1e61e51a538bedb16df is the first bad commit
> commit 384a48d71520ca569a63f1e61e51a538bedb16df
> Author: Stephen Warren <swarren at nvidia.com>
> Date: Wed Jun 1 11:14:21 2011 -0600
>
> ALSA: hda: HDMI: Support codecs with fewer cvts than pins
>
> The general concept of this change is to create a PCM device for each
> pin widget instead of each converter widget. Whenever a PCM is opened,
> a converter is dynamically selected to drive that pin based on those
> available for muxing into the pin.
>
> The one thing this model doesn't support is a single PCM/converter
> sending audio to multiple pin widgets at once.
>
> Note that this means that a struct hda_pcm_stream's nid variable is
> set to 0 except between a stream's open and cleanup calls. The dynamic
> de-assignment of converters to PCMs occurs within cleanup, not close,
> in order for it to co-incide with when controller stream IDs are
> cleaned up from converters.
>
> While the PCM for a pin is not open, the pin is disabled (its widget
> control's PIN_OUT bit is cleared) so that if the currently routed
> converter is used to drive a different PCM/pin, that audio does not
> leak out over a disabled pin.
>
> We use the recently added SPDIF virtualization feature in order to
> create SPDIF controls for each pin widget instead of each converter
> widget, so that state is specific to a PCM.
>
> In order to support this, a number of more mechanical changes are made:
>
> * s/nid/pin_nid/ or s/nid/cvt_nid/ in many places in order to make it
> clear exactly what the code is dealing with.
>
> * We now have per_pin and per_cvt arrays in hdmi_spec to store relevant
> data. In particular, we store a converter's capabilities in the per_cvt
> entry, rather than relying on a combination of codec_pcm_pars and
> the struct hda_pcm_stream.
>
> * ELD-related workarounds were removed from hdmi_channel_allocation
> into hdmi_instrinsic in order to simplifiy infoframe calculations and
> remove HW dependencies.
>
> * Various functions only apply to a single pin, since there is now
> only 1 pin per PCM. For example, hdmi_setup_infoframe,
> hdmi_setup_stream.
>
> * hdmi_add_pin and hdmi_add_cvt are more oriented at pure codec parsing
> and data retrieval, rather than determining which pins/converters
> are to be used for creating PCMs.
>
> This is quite a large change; it may be appropriate to simply read the
> result of the patch rather than the diffs. Some small parts of the change
> might be separable into different patches, but I think the bulk of the
> change will probably always be one large patch. Hopefully the change
> isn't too opaque!
>
> This has been tested on:
>
> * NVIDIA GeForce 400 series discrete graphics card. This model has the
> classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM
> audio to a PC monitor that supports audio.
>
> * NVIDIA GeForce 520 discrete graphics card. This model is the new
> 1 codec n converters m pins m>n model. Tested stereo PCM audio to a
> PC monitor that supports audio.
>
> * NVIDIA GeForce 400 series laptop graphics chip. This model has the
> classical 1:1:1 codec:converter:pcm widget model. Tested stereo PCM,
> multi-channel PCM, and AC3 pass-through to an AV receiver.
>
> * Intel Ibex Peak laptop. This model is the new 1 codec n converters m
> pins m>n model. Tested stereo PCM, multi-channel PCM, and AC3 pass-
> through to an AV receiver.
>
> Note that I'm not familiar at all with AC3 pass-through. Hence, I may
> not have covered all possible mechanisms that are applicable here. I do
> know that my receiver definitely received AC3, not decoded PCM. I tested
> with mplayer's "-afm hwac3" and/or "-af lavcac3enc" options, and alsa a
> WAV file that I believe has AC3 content rather than PCM.
>
> I also tested:
> * Play a stream
> * Mute while playing
> * Stop stream
> * Play some other streams to re-assign the converter to a different
> pin, PCM, set of SPDIF controls, ... hence hopefully triggering
> cleanup for the original PCM.
> * Unmute original stream while not playing
> * Play a stream on the original pin/PCM.
>
> This was to test SPDIF control virtualization.
>
> Signed-off-by: Stephen Warren <swarren at nvidia.com>
> Signed-off-by: Takashi Iwai <tiwai at suse.de>
>
> :040000 040000 894370c6534b1bf03df9a8a8c7d85c2eeffc7555 98cb8a73a0ed46f034e25bd35002930bc22376ef M sound
> [3 git_bisect_log.txt <text/plain; US-ASCII (base64)>]
> git bisect log
> git bisect start
> # bad: [76531d4166fb620375ff3c1ac24753265216d579] Merge branch 'topic/hda' into for-linus
> git bisect bad 76531d4166fb620375ff3c1ac24753265216d579
> # good: [7d339ae99758bc21033d4a19bcd4f7b55f96e24e] Merge branch 'topic/misc' into for-linus
> git bisect good 7d339ae99758bc21033d4a19bcd4f7b55f96e24e
> # bad: [39fa84e94a7df64a6ba27669ef98b51994fb6894] ALSA: hda - Simplify EAPD control in patch_realtek.c
> git bisect bad 39fa84e94a7df64a6ba27669ef98b51994fb6894
> # bad: [096a885494f6b89a9962c6faf18e1c6092e7919c] ALSA: hda - Initialize input-path dynamically in patch_via.c
> git bisect bad 096a885494f6b89a9962c6faf18e1c6092e7919c
> # bad: [e06e5a297474c8027beffe10541981845ca0c98b] ALSA: hda - Defer mixer element creation to the right time in patch_via.c
> git bisect bad e06e5a297474c8027beffe10541981845ca0c98b
> # bad: [b4a655e81d4d1d12abc92d29dfb7550e66a08799] ALSA: hda - Judge playback stream from stream id in azx_via_get_position()
> git bisect bad b4a655e81d4d1d12abc92d29dfb7550e66a08799
> # good: [3aaf898025b1f75f30457e00e890c9f7c43567ab] ALSA: hda: Separate generic and non-generic implementations
> git bisect good 3aaf898025b1f75f30457e00e890c9f7c43567ab
> # bad: [384a48d71520ca569a63f1e61e51a538bedb16df] ALSA: hda: HDMI: Support codecs with fewer cvts than pins
> git bisect bad 384a48d71520ca569a63f1e61e51a538bedb16df
> # good: [2def8172c6611f2577260287ebf5dd3b63f7ef55] ALSA: hda: hdmi_eld_update_pcm_info: update a stream in place
> git bisect good 2def8172c6611f2577260287ebf5dd3b63f7ef55
> [4 alsa-info_3.0.20.txt <text/plain; US-ASCII (base64)>]
> !!################################
> !!ALSA Information Script v 0.4.60
> !!################################
>
> !!Script ran on: Thu Feb 16 05:24:37 UTC 2012
>
>
> !!Linux Distribution
> !!------------------
>
> Debian GNU/Linux wheezy/sid \n \l
>
>
> !!DMI Information
> !!---------------
>
> Manufacturer: To be filled by O.E.M.
> Product Name: To be filled by O.E.M.
> Product Version: AC5G3N-S8_F6
>
>
> !!Kernel Information
> !!------------------
>
> Kernel release: 3.0.20-c2d.1-amd64
> Operating System: GNU/Linux
> Architecture: x86_64
> Processor: unknown
> SMP Enabled: Yes
>
>
> !!ALSA Version
> !!------------
>
> Driver version: 1.0.24
> Library version: 1.0.24.1
> Utilities version: 1.0.24.2
>
>
> !!Loaded ALSA modules
> !!-------------------
>
> snd_hda_intel
>
>
> !!Sound Servers on this system
> !!----------------------------
>
> Pulseaudio:
> Installed - Yes (/usr/bin/pulseaudio)
> Running - Yes
>
> ESound Daemon:
> Installed - Yes (/usr/bin/esd)
> Running - No
>
>
> !!Soundcards recognised by ALSA
> !!-----------------------------
>
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0xfe500000 irq 46
>
>
> !!PCI Soundcards installed in the system
> !!--------------------------------------
>
> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
> High Definition Audio (rev 06)
>
>
> !!Advanced information - PCI Vendor/Device/Subsystem ID's
> !!--------------------------------------------------------
>
> 00:1b.0 0403: 8086:3b56 (rev 06)
> Subsystem: 1458:a950
>
>
> !!Modprobe options (Sound related)
> !!--------------------------------
>
> snd-atiixp-modem: index=-2
> snd-intel8x0m: index=-2
> snd-via82xx-modem: index=-2
> snd-pcsp: index=-2
> snd-usb-audio: index=-2
>
>
> !!Loaded sound module options
> !!--------------------------
>
> !!Module: snd_hda_intel
> bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
> enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
> enable_msi : -1
> id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
> power_save : 0
> power_save_controller : Y
> probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
> single_cmd : N
>
>
> !!HDA-Intel Codec information
> !!---------------------------
> --startcollapse--
>
> Codec: Realtek ALC269VB
> Address: 0
> AFG Function Id: 0x1 (unsol 1)
> Vendor Id: 0x10ec0269
> Subsystem Id: 0x1458a950
> Revision Id: 0x100100
> No Modem Function Group found
> Default PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
> IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
> IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
> Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
> Control: name="Speaker Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
> Amp-Out vals: [0x50 0x50]
> Converter: stream=5, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
> Control: name="Front Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Device: name="ALC269VB Analog", type="Audio", device=0
> Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
> Amp-Out vals: [0x50 0x50]
> Converter: stream=5, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
> Converter: stream=0, channel=0
> Digital:
> Digital category: 0x0
> PCM:
> rates [0x5e0]: 44100 48000 88200 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-In vals: [0x8b 0x8b]
> Converter: stream=0, channel=0
> SDI-Select: 0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Connection: 1
> 0x23
> Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> Control: name="Capture Switch", index=0, device=0
> Control: name="Capture Volume", index=0, device=0
> Device: name="ALC269VB Analog", type="Audio", device=0
> Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-In vals: [0x8f 0x8f]
> Converter: stream=1, channel=0
> SDI-Select: 0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Connection: 1
> 0x22
> Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Control: name="Beep Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=4, ofs=0
> Control: name="Beep Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=4, ofs=0
> Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
> Connection: 5
> 0x18 0x19 0x1a 0x1b 0x1d
> Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x02 0x0b
> Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x03 0x0b
> Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00] [0x00]
> Connection: 2
> 0x02 0x0b
> Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x12 [Pin Complex] wcaps 0x40000b: Stereo Amp-In
> Control: name="Internal Mic Boost Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x03 0x03]
> Pincap 0x00000020: IN
> Pin Default 0x99a30940: [Fixed] Mic at Int ATAPI
> Conn = ATAPI, Color = Unknown
> DefAssociation = 0x4, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x20: IN
> Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
> Control: name="Speaker Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x00010014: OUT EAPD Detect
> EAPD 0x2: EAPD
> Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
> Conn = ATAPI, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=00, enabled=0
> Connection: 2
> 0x0c* 0x0d
> Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x17 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80]
> Pincap 0x00000010: OUT
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x00:
> Connection: 1
> 0x0f
> Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Control: name="Rear Mic Boost Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x02 0x02]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x00001734: IN OUT Detect
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x01a11830: [Jack] Mic at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0x3, Sequence = 0x0
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x0d
> Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
> Control: name="Front Mic Boost Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x00 0x00]
> Pincap 0x00001724: IN Detect
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x02a1183f: [Jack] Mic at Ext Front
> Conn = 1/8, Color = Black
> DefAssociation = 0x3, Sequence = 0xf
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Control: name="Front Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x0000003c: IN OUT HP Detect
> Pin Default 0x02211020: [Jack] HP Out at Ext Front
> Conn = 1/8, Color = Black
> DefAssociation = 0x2, Sequence = 0x0
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=01, enabled=1
> Connection: 2
> 0x0c 0x0d*
> Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x00000034: IN OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x20: IN
> Unsolicited: tag=00, enabled=0
> Connection: 2
> 0x0c* 0x0d
> Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x1d [Pin Complex] wcaps 0x400000: Mono
> Pincap 0x00000020: IN
> Pin Default 0x598301f0: [N/A] Line In at Int ATAPI
> Conn = ATAPI, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x20: IN
> Node 0x1e [Pin Complex] wcaps 0x400381: Stereo Digital
> Pincap 0x00000014: OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x06
> Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
> Processing caps: benign=0, ncoeff=25
> Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
> Control: name="Headphone Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x0000001c: OUT HP Detect
> Pin Default 0x0121101f: [Jack] HP Out at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0x1, Sequence = 0xf
> Pin-ctls: 0xc0: OUT HP
> Unsolicited: tag=04, enabled=1
> Connection: 2
> 0x0c 0x0d*
> Node 0x22 [Audio Selector] wcaps 0x30010b: Stereo Amp-In
> Control: name="Input Source", index=0, device=0
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
> 0x00] [0x00 0x00] [0x00 0x00]
> Connection: 7
> 0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12
> Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
> 0x80] [0x80 0x80]
> Connection: 6
> 0x18 0x19 0x1a 0x1b 0x1d 0x0b
> Codec: Intel IbexPeak HDMI
> Address: 3
> AFG Function Id: 0x1 (unsol 0)
> Vendor Id: 0x80862804
> Subsystem Id: 0x80860101
> Revision Id: 0x100000
> No Modem Function Group found
> Default PCM:
> rates [0x0]:
> bits [0x0]:
> formats [0x0]:
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
> Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
> Control: name="IEC958 Playback Con Mask", index=0, device=0
> Control: name="IEC958 Playback Pro Mask", index=0, device=0
> Control: name="IEC958 Playback Default", index=0, device=0
> Control: name="IEC958 Playback Switch", index=0, device=0
> Device: name="HDMI 0", type="HDMI", device=3
> Converter: stream=8, channel=0
> Digital: Enabled
> Digital category: 0x0
> PCM:
> rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
> bits [0x1e]: 16 20 24 32
> formats [0x5]: PCM AC3
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
> Converter: stream=0, channel=0
> Digital: Enabled
> Digital category: 0x0
> PCM:
> rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
> bits [0x1e]: 16 20 24 32
> formats [0x5]: PCM AC3
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Node 0x04 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x09000094: OUT Detect HBR HDMI DP
> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
> Conn = Digital, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=04, enabled=1
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Connection: 2
> 0x02* 0x03
> Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x09000094: OUT Detect HBR HDMI DP
> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
> Conn = Digital, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=05, enabled=1
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Connection: 2
> 0x02* 0x03
> Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x09000094: OUT Detect HBR HDMI DP
> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
> Conn = Digital, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=06, enabled=1
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Connection: 2
> 0x02* 0x03
> Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
> --endcollapse--
>
> [5 alsa-info_3.2.4.txt <text/plain; US-ASCII (base64)>]
> !!################################
> !!ALSA Information Script v 0.4.60
> !!################################
>
> !!Script ran on: Thu Feb 16 05:29:09 UTC 2012
>
>
> !!Linux Distribution
> !!------------------
>
> Debian GNU/Linux wheezy/sid \n \l
>
>
> !!DMI Information
> !!---------------
>
> Manufacturer: To be filled by O.E.M.
> Product Name: To be filled by O.E.M.
> Product Version: AC5G3N-S8_F6
>
>
> !!Kernel Information
> !!------------------
>
> Kernel release: 3.2.0-1-amd64
> Operating System: GNU/Linux
> Architecture: x86_64
> Processor: unknown
> SMP Enabled: Yes
>
>
> !!ALSA Version
> !!------------
>
> Driver version: 1.0.24
> Library version: 1.0.24.1
> Utilities version: 1.0.24.2
>
>
> !!Loaded ALSA modules
> !!-------------------
>
> snd_hda_intel
>
>
> !!Sound Servers on this system
> !!----------------------------
>
> Pulseaudio:
> Installed - Yes (/usr/bin/pulseaudio)
> Running - Yes
>
> ESound Daemon:
> Installed - Yes (/usr/bin/esd)
> Running - No
>
>
> !!Soundcards recognised by ALSA
> !!-----------------------------
>
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0xfe500000 irq 46
>
>
> !!PCI Soundcards installed in the system
> !!--------------------------------------
>
> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset
> High Definition Audio (rev 06)
>
>
> !!Advanced information - PCI Vendor/Device/Subsystem ID's
> !!--------------------------------------------------------
>
> 00:1b.0 0403: 8086:3b56 (rev 06)
> Subsystem: 1458:a950
>
>
> !!Modprobe options (Sound related)
> !!--------------------------------
>
> snd-atiixp-modem: index=-2
> snd-intel8x0m: index=-2
> snd-via82xx-modem: index=-2
> snd-pcsp: index=-2
> snd-usb-audio: index=-2
>
>
> !!Loaded sound module options
> !!--------------------------
>
> !!Module: snd_hda_intel
> align_buffer_size : Y
> bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1
> enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
> enable_msi : -1
> id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
> position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
> power_save : 0
> power_save_controller : Y
> probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
> probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
> single_cmd : N
> snoop : Y
>
>
> !!HDA-Intel Codec information
> !!---------------------------
> --startcollapse--
>
> Codec: Realtek ALC269VB
> Address: 0
> AFG Function Id: 0x1 (unsol 1)
> Vendor Id: 0x10ec0269
> Subsystem Id: 0x1458a950
> Revision Id: 0x100100
> No Modem Function Group found
> Default PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
> IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
> IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
> Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
> Control: name="PCM Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Device: name="ALC269VB Analog", type="Audio", device=0
> Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
> Amp-Out vals: [0x50 0x50]
> Converter: stream=8, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
> Control: name="Headphone Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
> Amp-Out vals: [0x50 0x50]
> Converter: stream=8, channel=0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
> Converter: stream=0, channel=0
> Digital:
> Digital category: 0x0
> PCM:
> rates [0x5e0]: 44100 48000 88200 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-In vals: [0x8b 0x8b]
> Converter: stream=0, channel=0
> SDI-Select: 0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Connection: 1
> 0x23
> Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
> Control: name="Capture Switch", index=0, device=0
> Control: name="Capture Volume", index=0, device=0
> Device: name="ALC269VB Analog", type="Audio", device=0
> Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-In vals: [0x8f 0x8f]
> Converter: stream=4, channel=0
> SDI-Select: 0
> PCM:
> rates [0x560]: 44100 48000 96000 192000
> bits [0xe]: 16 20 24
> formats [0x1]: PCM
> Connection: 1
> 0x22
> Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Control: name="Rear Mic Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Control: name="Rear Mic Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Control: name="Front Mic Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=1, ofs=0
> Control: name="Front Mic Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=1, ofs=0
> Control: name="Beep Playback Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=4, ofs=0
> Control: name="Beep Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=4, ofs=0
> Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x97 0x97]
> Connection: 5
> 0x18 0x19 0x1a 0x1b 0x1d
> Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x02 0x0b
> Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00 0x00] [0x00 0x00]
> Connection: 2
> 0x03 0x0b
> Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x00] [0x80]
> Connection: 2
> 0x02 0x0b
> Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x12 [Pin Complex] wcaps 0x40000b: Stereo Amp-In
> Control: name="Internal Mic Boost Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x03 0x03]
> Pincap 0x00000020: IN
> Pin Default 0x99a30940: [Fixed] Mic at Int ATAPI
> Conn = ATAPI, Color = Unknown
> DefAssociation = 0x4, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x20: IN
> Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
> Control: name="Speaker Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x00010014: OUT EAPD Detect
> EAPD 0x2: EAPD
> Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
> Conn = ATAPI, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=00, enabled=0
> Connection: 2
> 0x0c* 0x0d
> Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x17 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80]
> Pincap 0x00000010: OUT
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x00:
> Connection: 1
> 0x0f
> Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Control: name="Rear Mic Boost Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x02 0x02]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x00001734: IN OUT Detect
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x01a11830: [Jack] Mic at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0x3, Sequence = 0x0
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x0d
> Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
> Control: name="Front Mic Boost Volume", index=0, device=0
> ControlAmp: chs=3, dir=In, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x00 0x00]
> Pincap 0x00001724: IN Detect
> Vref caps: HIZ 50 GRD 80
> Pin Default 0x02a1183f: [Jack] Mic at Ext Front
> Conn = 1/8, Color = Black
> DefAssociation = 0x3, Sequence = 0xf
> Pin-ctls: 0x24: IN VREF_80
> Unsolicited: tag=00, enabled=0
> Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Control: name="PCM Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x0000003c: IN OUT HP Detect
> Pin Default 0x02211020: [Jack] HP Out at Ext Front
> Conn = 1/8, Color = Black
> DefAssociation = 0x2, Sequence = 0x0
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=01, enabled=1
> Connection: 2
> 0x0c* 0x0d
> Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
> Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
> Amp-In vals: [0x00 0x00]
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x80 0x80]
> Pincap 0x00000034: IN OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x20: IN
> Unsolicited: tag=00, enabled=0
> Connection: 2
> 0x0c* 0x0d
> Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x1d [Pin Complex] wcaps 0x400000: Mono
> Pincap 0x00000020: IN
> Pin Default 0x598301f0: [N/A] Line In at Int ATAPI
> Conn = ATAPI, Color = Unknown
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x20: IN
> Node 0x1e [Pin Complex] wcaps 0x400381: Stereo Digital
> Pincap 0x00000014: OUT Detect
> Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0xf, Sequence = 0x0
> Misc = NO_PRESENCE
> Pin-ctls: 0x40: OUT
> Unsolicited: tag=00, enabled=0
> Connection: 1
> 0x06
> Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
> Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
> Processing caps: benign=0, ncoeff=25
> Node 0x21 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
> Control: name="Headphone Playback Switch", index=0, device=0
> ControlAmp: chs=3, dir=Out, idx=0, ofs=0
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x0000001c: OUT HP Detect
> Pin Default 0x0121101f: [Jack] HP Out at Ext Rear
> Conn = 1/8, Color = Black
> DefAssociation = 0x1, Sequence = 0xf
> Pin-ctls: 0xc0: OUT HP
> Unsolicited: tag=04, enabled=1
> Connection: 2
> 0x0c 0x0d*
> Node 0x22 [Audio Selector] wcaps 0x30010b: Stereo Amp-In
> Control: name="Input Source", index=0, device=0
> Amp-In caps: N/A
> Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00
> 0x00] [0x00 0x00] [0x00 0x00]
> Connection: 7
> 0x18* 0x19 0x1a 0x1b 0x1d 0x0b 0x12
> Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
> Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
> 0x80] [0x80 0x80]
> Connection: 6
> 0x18 0x19 0x1a 0x1b 0x1d 0x0b
> Codec: Intel IbexPeak HDMI
> Address: 3
> AFG Function Id: 0x1 (unsol 0)
> Vendor Id: 0x80862804
> Subsystem Id: 0x80860101
> Revision Id: 0x100000
> No Modem Function Group found
> Default PCM:
> rates [0x0]:
> bits [0x0]:
> formats [0x0]:
> Default Amp-In caps: N/A
> Default Amp-Out caps: N/A
> GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
> Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
> Converter: stream=0, channel=0
> Digital: Enabled GenLevel
> Digital category: 0x2
> PCM:
> rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
> bits [0x1e]: 16 20 24 32
> formats [0x5]: PCM AC3
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
> Converter: stream=0, channel=0
> Digital: Enabled
> Digital category: 0x0
> PCM:
> rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
> bits [0x1e]: 16 20 24 32
> formats [0x5]: PCM AC3
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Node 0x04 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
> Control: name="IEC958 Playback Con Mask", index=0, device=0
> Control: name="IEC958 Playback Pro Mask", index=0, device=0
> Control: name="IEC958 Playback Default", index=0, device=0
> Control: name="IEC958 Playback Switch", index=0, device=0
> Control: name="ELD", index=0, device=3
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x09000094: OUT Detect HBR HDMI DP
> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
> Conn = Digital, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x00:
> Unsolicited: tag=04, enabled=1
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Connection: 2
> 0x02* 0x03
> Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
> Control: name="IEC958 Playback Con Mask", index=1, device=0
> Control: name="IEC958 Playback Pro Mask", index=1, device=0
> Control: name="IEC958 Playback Default", index=1, device=0
> Control: name="IEC958 Playback Switch", index=1, device=0
> Control: name="ELD", index=0, device=7
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x09000094: OUT Detect HBR HDMI DP
> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
> Conn = Digital, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x00:
> Unsolicited: tag=05, enabled=1
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Connection: 2
> 0x02* 0x03
> Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
> Control: name="IEC958 Playback Con Mask", index=2, device=0
> Control: name="IEC958 Playback Pro Mask", index=2, device=0
> Control: name="IEC958 Playback Default", index=2, device=0
> Control: name="IEC958 Playback Switch", index=2, device=0
> Control: name="ELD", index=0, device=8
> Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
> Amp-Out vals: [0x00 0x00]
> Pincap 0x09000094: OUT Detect HBR HDMI DP
> Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
> Conn = Digital, Color = Unknown
> DefAssociation = 0x1, Sequence = 0x0
> Pin-ctls: 0x00:
> Unsolicited: tag=06, enabled=1
> Power states: D0 D3
> Power: setting=D0, actual=D0
> Connection: 2
> 0x02* 0x03
> Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
> --endcollapse--
>
More information about the Alsa-devel
mailing list