[alsa-devel] hdsp rpm support

[Roman Haefeli]

Hi Adrian

On Mon, 2012-02-13 at 16:06 +0100, Adrian Knoth wrote:
> On 01/18/2012 11:54 AM, Roman Haefeli wrote:
> Sorry for the late reply, I was on vacation...

No problem at all. I'm glad to get a response.

> [RME HDSP RPM]
> > May I ask kindly for the 'other' version of the driver, which I would be
> > happy to test?
> 
> As already mentioned by Fons, there are so many differnt versions now
> that I hardly remember which one is supposed to work. ;)
> 
>     http://adi.loris.tv/hdsp_20111031.tar.bz2
> 
> 
> seems to be a combined archive. It contains two versions of the driver,
> the first (hdsp.c) is more or less what's in current alsa-driver, the
> other one (hdsp-test.c) is what turned out to be working for one user,
> so you would do

Unfortunately, it seems that none of those versions is working for me. 
I did as you suggested and inserted the module based on hdsp-test.c.
When inserting the cardbus interface (with connected iobox), I get this:

---
Feb 14 23:48:38 yoyo5 kernel: [40573.384092] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Feb 14 23:48:38 yoyo5 kernel: [40573.384130] pci 0000:16:00.0: [10ee:3fc5] type 0 class 0x000401
Feb 14 23:48:38 yoyo5 kernel: [40573.384172] pci 0000:16:00.0: reg 10: [mem 0x00000000-0x0000ffff]
Feb 14 23:48:38 yoyo5 kernel: [40573.384337] pci 0000:16:00.0: BAR 0: assigned [mem 0x80000000-0x8000ffff]
Feb 14 23:48:38 yoyo5 kernel: [40573.384352] pci 0000:16:00.0: BAR 0: set to [mem 0x80000000-0x8000ffff] (PCI address [0x80000000-0x8000ffff])
Feb 14 23:48:38 yoyo5 kernel: [40573.384376] pci 0000:16:00.0: cache line size of 64 is not supported
Feb 14 23:48:38 yoyo5 kernel: [40573.384673] hdsp 0000:16:00.0: enabling device (0000 -> 0002)
Feb 14 23:48:38 yoyo5 kernel: [40573.384691] hdsp 0000:16:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 14 23:48:41 yoyo5 kernel: [40576.408074] Hammerfall-DSP: no IO box connected!
Feb 14 23:48:41 yoyo5 kernel: [40576.408148] hdsp 0000:16:00.0: PCI INT A disabled
Feb 14 23:48:41 yoyo5 kernel: [40576.408173] hdsp: probe of 0000:16:00.0 failed with error -5
---

It's seems it's not even recognizing that an RPM box is attached.

The other version (hdsp.c from your archive) gives me this, which is
similar to what I get with the stock alsa drivers:

---
Feb 14 23:57:52 yoyo5 kernel: [41126.784055] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Feb 14 23:57:52 yoyo5 kernel: [41126.784093] pci 0000:16:00.0: [10ee:3fc5] type 0 class 0x000401
Feb 14 23:57:52 yoyo5 kernel: [41126.784134] pci 0000:16:00.0: reg 10: [mem 0x00000000-0x0000ffff]
Feb 14 23:57:52 yoyo5 kernel: [41126.784300] pci 0000:16:00.0: BAR 0: assigned [mem 0x80000000-0x8000ffff]
Feb 14 23:57:52 yoyo5 kernel: [41126.784315] pci 0000:16:00.0: BAR 0: set to [mem 0x80000000-0x8000ffff] (PCI address [0x80000000-0x8000ffff])
Feb 14 23:57:52 yoyo5 kernel: [41126.784339] pci 0000:16:00.0: cache line size of 64 is not supported
Feb 14 23:57:52 yoyo5 kernel: [41126.784639] hdsp 0000:16:00.0: enabling device (0000 -> 0002)
Feb 14 23:57:52 yoyo5 kernel: [41126.784658] hdsp 0000:16:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Feb 14 23:57:54 yoyo5 kernel: [41129.343204] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
Feb 14 23:57:54 yoyo5 kernel: [41129.346250] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
Feb 14 23:57:54 yoyo5 kernel: [41129.351601] Hammerfall-DSP: loading firmware
Feb 14 23:57:55 yoyo5 kernel: [41129.857764] Hammerfall-DSP: wait for FIFO status <= 0 failed after 5000 iterations
Feb 14 23:57:55 yoyo5 kernel: [41129.857767] Hammerfall-DSP: timeout waiting for download preparation
Feb 14 23:57:55 yoyo5 kernel: [41129.857769] Hammerfall-DSP: couldn't get firmware from userspace. try using hdsploader
Feb 14 23:57:55 yoyo5 kernel: [41129.857771] Hammerfall-DSP: card initialization pending : waiting for firmware
---