[alsa-devel] [PATCH 7/8] ASoC: omap-twl4030: Add support for routing, voice port and jack detect
Peter Ujfalusi
peter.ujfalusi at ti.com
Mon Dec 31 11:51:48 CET 2012
Update the common machine driver to support more boards including Zoom2 and
SDP3430.
- Support for voice port of twl4030
- HS jack plug detection support
- The audio routing can be fine tuned via pdata or via provided routing
table from DT.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
---
.../devicetree/bindings/sound/omap-twl4030.txt | 46 +++++
sound/soc/omap/Kconfig | 2 +
sound/soc/omap/omap-twl4030.c | 204 ++++++++++++++++++++-
3 files changed, 250 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
index 6fae51c..1ab6bc8 100644
--- a/Documentation/devicetree/bindings/sound/omap-twl4030.txt
+++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
@@ -6,6 +6,52 @@ Required properties:
- ti,mcbsp: phandle for the McBSP node
- ti,codec: phandle for the twl4030 audio node
+Optional properties:
+- ti,mcbsp-voice: phandle for the McBSP node connected to the voice port of twl
+- ti, jack-det-gpio: Jack detect GPIO
+- ti,audio-routing: List of connections between audio components.
+ Each entry is a pair of strings, the first being the connection's sink,
+ the second being the connection's source.
+ If the routing is not provided all possible connection will be available
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Earpiece Spk
+ * Handsfree Spk
+ * Ext Spk
+ * Main Mic
+ * Sub Mic
+ * Headset Mic
+ * Carkit Mic
+ * Digital0 Mic
+ * Digital1 Mic
+ * Line In
+
+twl4030 pins:
+ * HSOL
+ * HSOR
+ * EARPIECE
+ * HFL
+ * HFR
+ * PREDRIVEL
+ * PREDRIVER
+ * CARKITL
+ * CARKITR
+ * MAINMIC
+ * SUBMIC
+ * HSMIC
+ * DIGIMIC0
+ * DIGIMIC1
+ * CARKITMIC
+ * AUXL
+ * AUXR
+
+ * Headset Mic Bias
+ * Mic Bias 1 /* Used for Main Mic or Digimic0 */
+ * Mic Bias 2 /* Used for Sub Mic or Digimic1 */
+
Example:
sound {
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index 7048137..e8d2a2f 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -91,6 +91,8 @@ config SND_OMAP_SOC_OMAP_TWL4030
- Gumstix Overo or CompuLab CM-T35/CM-T3730
- IGEP v2
- OMAP3EVM
+ - SDP3430
+ - Zoom2
config SND_OMAP_SOC_OMAP_ABE_TWL6040
tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec"
diff --git a/sound/soc/omap/omap-twl4030.c b/sound/soc/omap/omap-twl4030.c
index 4541d28..fd98509 100644
--- a/sound/soc/omap/omap-twl4030.c
+++ b/sound/soc/omap/omap-twl4030.c
@@ -11,6 +11,8 @@
* omap3evm (Author: Anuj Aggarwal <anuj.aggarwal at ti.com>)
* overo (Author: Steve Sakoman <steve at sakoman.com>)
* igep0020 (Author: Enric Balletbo i Serra <eballetbo at iseebcn.com>)
+ * zoom2 (Author: Misael Lopez Cruz <misael.lopez at ti.com>)
+ * sdp3430 (Author: Misael Lopez Cruz <misael.lopez at ti.com>)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -32,14 +34,22 @@
#include <linux/platform_data/omap-twl4030.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
+#include <sound/jack.h>
#include "omap-mcbsp.h"
#include "omap-pcm.h"
+struct omap_twl4030 {
+ int jack_detect; /* board can detect jack events */
+ struct snd_soc_jack hs_jack;
+};
+
static int omap_twl4030_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
@@ -87,17 +97,164 @@ static struct snd_soc_ops omap_twl4030_ops = {
.hw_params = omap_twl4030_hw_params,
};
+static const struct snd_soc_dapm_widget dapm_widgets[] = {
+ SND_SOC_DAPM_SPK("Earpiece Spk", NULL),
+ SND_SOC_DAPM_SPK("Handsfree Spk", NULL),
+ SND_SOC_DAPM_HP("Headset Stereophone", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+ SND_SOC_DAPM_SPK("Carkit Spk", NULL),
+
+ SND_SOC_DAPM_MIC("Main Mic", NULL),
+ SND_SOC_DAPM_MIC("Sub Mic", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+ SND_SOC_DAPM_MIC("Carkit Mic", NULL),
+ SND_SOC_DAPM_MIC("Digital0 Mic", NULL),
+ SND_SOC_DAPM_MIC("Digital1 Mic", NULL),
+ SND_SOC_DAPM_LINE("Line In", NULL),
+};
+
+static const struct snd_soc_dapm_route audio_map[] = {
+ /* Headset Stereophone: HSOL, HSOR */
+ {"Headset Stereophone", NULL, "HSOL"},
+ {"Headset Stereophone", NULL, "HSOR"},
+ /* External Speakers: HFL, HFR */
+ {"Handsfree Spk", NULL, "HFL"},
+ {"Handsfree Spk", NULL, "HFR"},
+ /* External Speakers: PredrivL, PredrivR */
+ {"Ext Spk", NULL, "PREDRIVEL"},
+ {"Ext Spk", NULL, "PREDRIVER"},
+ /* Carkit speakers: CARKITL, CARKITR */
+ {"Carkit Spk", NULL, "CARKITL"},
+ {"Carkit Spk", NULL, "CARKITR"},
+ /* Earpiece */
+ {"Earpiece Spk", NULL, "EARPIECE"},
+
+ /* External Mics: MAINMIC, SUBMIC with bias */
+ {"MAINMIC", NULL, "Main Mic"},
+ {"Main Mic", NULL, "Mic Bias 1"},
+ {"SUBMIC", NULL, "Sub Mic"},
+ {"Sub Mic", NULL, "Mic Bias 2"},
+ /* Headset Mic: HSMIC with bias */
+ {"HSMIC", NULL, "Headset Mic"},
+ {"Headset Mic", NULL, "Headset Mic Bias"},
+ /* Digital Mics: DIGIMIC0, DIGIMIC1 with bias */
+ {"DIGIMIC0", NULL, "Digital0 Mic"},
+ {"Digital0 Mic", NULL, "Mic Bias 1"},
+ {"DIGIMIC1", NULL, "Digital1 Mic"},
+ {"Digital1 Mic", NULL, "Mic Bias 2"},
+ /* Carkit In: CARKITMIC */
+ {"CARKITMIC", NULL, "Carkit Mic"},
+ /* Aux In: AUXL, AUXR */
+ {"AUXL", NULL, "Line In"},
+ {"AUXR", NULL, "Line In"},
+};
+
+/* Headset jack detection DAPM pins */
+static struct snd_soc_jack_pin hs_jack_pins[] = {
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+ {
+ .pin = "Headset Stereophone",
+ .mask = SND_JACK_HEADPHONE,
+ },
+};
+
+/* Headset jack detection gpios */
+static struct snd_soc_jack_gpio hs_jack_gpios[] = {
+ {
+ .name = "hsdet-gpio",
+ .report = SND_JACK_HEADSET,
+ .debounce_time = 200,
+ },
+};
+
+static inline void twl4030_disconnect_pin(struct snd_soc_dapm_context *dapm,
+ int connected, char *pin)
+{
+ if (!connected)
+ snd_soc_dapm_disable_pin(dapm, pin);
+}
+
+static int omap_twl4030_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_codec *codec = rtd->codec;
+ struct snd_soc_card *card = codec->card;
+ struct snd_soc_dapm_context *dapm = &codec->dapm;
+ struct omap_tw4030_pdata *pdata = dev_get_platdata(card->dev);
+ struct omap_twl4030 *priv = snd_soc_card_get_drvdata(card);
+ int ret = 0;
+
+ /* Headset jack detection only if it is supported */
+ if (priv->jack_detect > 0) {
+ hs_jack_gpios[0].gpio = priv->jack_detect;
+
+ ret = snd_soc_jack_new(codec, "Headset Jack", SND_JACK_HEADSET,
+ &priv->hs_jack);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_jack_add_pins(&priv->hs_jack,
+ ARRAY_SIZE(hs_jack_pins),
+ hs_jack_pins);
+ if (ret)
+ return ret;
+
+ ret = snd_soc_jack_add_gpios(&priv->hs_jack,
+ ARRAY_SIZE(hs_jack_gpios),
+ hs_jack_gpios);
+ if (ret)
+ return ret;
+ }
+
+ /*
+ * NULL pdata means we booted with DT. In this case the routing is
+ * provided and the card is fully routed, no need to mark pins.
+ */
+ if (!pdata || !pdata->custom_routing)
+ return ret;
+
+ /* Disable not connected paths if not used */
+ twl4030_disconnect_pin(dapm, pdata->has_ear, "Earpiece Spk");
+ twl4030_disconnect_pin(dapm, pdata->has_hf, "Handsfree Spk");
+ twl4030_disconnect_pin(dapm, pdata->has_hs, "Headset Stereophone");
+ twl4030_disconnect_pin(dapm, pdata->has_predriv, "Ext Spk");
+ twl4030_disconnect_pin(dapm, pdata->has_carkit, "Carkit Spk");
+
+ twl4030_disconnect_pin(dapm, pdata->has_mainmic, "Main Mic");
+ twl4030_disconnect_pin(dapm, pdata->has_submic, "Sub Mic");
+ twl4030_disconnect_pin(dapm, pdata->has_hsmic, "Headset Mic");
+ twl4030_disconnect_pin(dapm, pdata->has_carkitmic, "Carkit Mic");
+ twl4030_disconnect_pin(dapm, pdata->has_digimic0, "Digital0 Mic");
+ twl4030_disconnect_pin(dapm, pdata->has_digimic1, "Digital1 Mic");
+ twl4030_disconnect_pin(dapm, pdata->has_linein, "Line In");
+
+ return ret;
+}
+
/* Digital audio interface glue - connects codec <--> CPU */
static struct snd_soc_dai_link omap_twl4030_dai_links[] = {
{
- .name = "TWL4030",
- .stream_name = "TWL4030",
+ .name = "TWL4030 HiFi",
+ .stream_name = "TWL4030 HiFi",
.cpu_dai_name = "omap-mcbsp.2",
.codec_dai_name = "twl4030-hifi",
.platform_name = "omap-pcm-audio",
.codec_name = "twl4030-codec",
+ .init = omap_twl4030_init,
.ops = &omap_twl4030_ops,
},
+ {
+ .name = "TWL4030 Voice",
+ .stream_name = "TWL4030 Voice",
+ .cpu_dai_name = "omap-mcbsp.3",
+ .codec_dai_name = "twl4030-voice",
+ .platform_name = "omap-pcm-audio",
+ .codec_name = "twl4030-codec",
+ .dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
+ },
};
/* Audio machine driver */
@@ -105,6 +262,11 @@ static struct snd_soc_card omap_twl4030_card = {
.owner = THIS_MODULE,
.dai_link = omap_twl4030_dai_links,
.num_links = ARRAY_SIZE(omap_twl4030_dai_links),
+
+ .dapm_widgets = dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(dapm_widgets),
+ .dapm_routes = audio_map,
+ .num_dapm_routes = ARRAY_SIZE(audio_map),
};
static int omap_twl4030_probe(struct platform_device *pdev)
@@ -112,12 +274,18 @@ static int omap_twl4030_probe(struct platform_device *pdev)
struct omap_tw4030_pdata *pdata = dev_get_platdata(&pdev->dev);
struct device_node *node = pdev->dev.of_node;
struct snd_soc_card *card = &omap_twl4030_card;
+ struct omap_twl4030 *priv;
int ret = 0;
card->dev = &pdev->dev;
+ priv = devm_kzalloc(&pdev->dev, sizeof(struct omap_twl4030), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
if (node) {
struct device_node *dai_node;
+ struct property *prop;
if (snd_soc_of_parse_card_name(card, "ti,model")) {
dev_err(&pdev->dev, "Card name is not provided\n");
@@ -132,6 +300,27 @@ static int omap_twl4030_probe(struct platform_device *pdev)
omap_twl4030_dai_links[0].cpu_dai_name = NULL;
omap_twl4030_dai_links[0].cpu_of_node = dai_node;
+ dai_node = of_parse_phandle(node, "ti,mcbsp-voice", 0);
+ if (!dai_node) {
+ card->num_links = 1;
+ } else {
+ omap_twl4030_dai_links[1].cpu_dai_name = NULL;
+ omap_twl4030_dai_links[1].cpu_of_node = dai_node;
+ }
+
+ priv->jack_detect = of_get_named_gpio(node,
+ "ti,jack-det-gpio", 0);
+
+ /* Optional: audio routing can be provided */
+ prop = of_find_property(node, "ti,audio-routing", NULL);
+ if (prop) {
+ ret = snd_soc_of_parse_audio_routing(card,
+ "ti,audio-routing");
+ if (ret)
+ return ret;
+
+ card->fully_routed = 1;
+ }
} else if (pdata) {
if (pdata->card_name) {
card->name = pdata->card_name;
@@ -139,11 +328,17 @@ static int omap_twl4030_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "Card name is not provided\n");
return -ENODEV;
}
+
+ if (!pdata->voice_connected)
+ card->num_links = 1;
+
+ priv->jack_detect = pdata->jack_detect;
} else {
dev_err(&pdev->dev, "Missing pdata\n");
return -ENODEV;
}
+ snd_soc_card_set_drvdata(card, priv);
ret = snd_soc_register_card(card);
if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
@@ -157,7 +352,12 @@ static int omap_twl4030_probe(struct platform_device *pdev)
static int omap_twl4030_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct omap_twl4030 *priv = snd_soc_card_get_drvdata(card);
+ if (priv->jack_detect > 0)
+ snd_soc_jack_free_gpios(&priv->hs_jack,
+ ARRAY_SIZE(hs_jack_gpios),
+ hs_jack_gpios);
snd_soc_unregister_card(card);
return 0;
--
1.8.0.2
More information about the Alsa-devel
mailing list