[alsa-devel] sound: usb-audio: [PATCH]x2 full capture/playback/spdif support for Digidesign Mbox 2
Damien Zammit
damien.zammit at gmail.com
Sun Dec 23 05:54:48 CET 2012
On 23 December 2012 14:36, Damien Zammit <damien.zammit at gmail.com> wrote:
> I have fixed both the kernel panic and the broken pipe issue with midi.
> I believe this completes the patch, I just don't know how to submit it to you.
Please find attached the patch you accepted previously: (Version 5)
Plus an incremental patch (Version 5-2)
***Please ignore patch (Version 6)***
I hope this is the easiest way for you to review it.
It compiles, runs, and works on the hardware now without errors.
Thanks,
Damien
-------------- next part --------------
Support for Digidesign Mbox 2 USB sound card:
This patch is the result of a lot of trial and error, since there are no specs
available for the device.
Full duplex support is provided, i.e. playback and recording in stereo.
The format is hardcoded at 48000Hz @ 24 bit, which is the maximum that the
device supports. Also, MIDI in and MIDI out both work.
Users will notice that the S/PDIF light also flashes when playback or recording
is active. I believe this means that S/PDIF input/output is simultaneously
activated with the analogue i/o during use.
But this particular functionality remains untested.
Note that this particular version of the patch is so far untested on the
physical hardware because I have not compiled a full kernel with the changes.
However, extensive testing has been done by many users of the hardware
who believe other versions of my patch have worked since circa 2009.
Signed-off-by: Damien Zammit <damien at zamaudio.com>
---
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index 34b9bb7..c183d34 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -2181,6 +2181,10 @@ int snd_usbmidi_create(struct snd_card *card,
umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
+ case QUIRK_MIDI_MBOX2:
+ umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops;
+ err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
+ break;
case QUIRK_MIDI_RAW_BYTES:
umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
/*
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 579cf6f..cdcf6b4 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2921,6 +2921,93 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
},
+
+/* DIGIDESIGN MBOX 2 */
+{
+ USB_DEVICE(0x0dba, 0x3000),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .vendor_name = "Digidesign",
+ .product_name = "Mbox 2",
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3BE,
+ .channels = 2,
+ .iface = 2,
+ .altsetting = 2,
+ .altset_idx = 1,
+ .attributes = 0x00,
+ .endpoint = 0x03,
+ .ep_attr = USB_ENDPOINT_SYNC_ASYNC,
+ .maxpacksize = 0x128,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) {
+ 48000
+ }
+ }
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 4,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3BE,
+ .channels = 2,
+ .iface = 4,
+ .altsetting = 2,
+ .altset_idx = 1,
+ .attributes = UAC_EP_CS_ATTR_SAMPLE_RATE,
+ .endpoint = 0x85,
+ .ep_attr = USB_ENDPOINT_SYNC_SYNC,
+ .maxpacksize = 0x128,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) {
+ 48000
+ }
+ }
+ },
+ {
+ .ifnum = 5,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = 6,
+ .type = QUIRK_MIDI_MBOX2,
+ .data = &(const struct snd_usb_midi_endpoint_info) {
+ .out_ep = 0x02,
+ .out_cables = 0x0001,
+ .in_ep = 0x81,
+ .in_interval = 0x01,
+ .in_cables = 0x0001
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
{
/* Tascam US122 MKII - playback-only support */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE,
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 0f58b4b..8f23af5 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -306,6 +306,7 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
+ [QUIRK_MIDI_MBOX2] = create_any_midi_quirk,
[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
[QUIRK_MIDI_CME] = create_any_midi_quirk,
@@ -655,6 +656,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
return snd_usb_cm6206_boot_quirk(dev);
+ case USB_ID(0x0dba, 0x3000):
+ /* Digidesign Mbox 2 */
+ return snd_usb_mbox2_boot_quirk(dev);
+
case USB_ID(0x133e, 0x0815):
/* Access Music VirusTI Desktop */
return snd_usb_accessmusic_boot_quirk(dev);
@@ -761,6 +766,92 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
}
}
+static void mbox2_setup_48_24_magic(struct usb_device *dev)
+{
+ u8 srate[3];
+ u8 temp[12];
+
+ /* Choose 48000Hz permanently */
+ srate[0] = 0x80;
+ srate[1] = 0xbb;
+ srate[2] = 0x00;
+
+ /* Send the magic! */
+ snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+ 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
+ return;
+}
+
+/* Digidesign Mbox 2 needs to load firmware onboard
+ * and driver must wait a few seconds for initialisation.
+ */
+
+#define MBOX2_FIRMWARE_SIZE 646
+#define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
+#define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
+
+int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
+{
+ struct usb_host_config *config = dev->actconfig;
+ int err;
+ u8 bootresponse;
+ int fwsize;
+ int count;
+
+ fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
+
+ if (fwsize != MBOX2_FIRMWARE_SIZE) {
+ snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
+ return -ENODEV;
+ }
+
+ snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
+
+ count = 0;
+ bootresponse = MBOX2_BOOT_LOADING;
+ while ((bootresponse == MBOX2_BOOT_LOADING) && (count < 10)) {
+ msleep(500); /* 0.5 second delay */
+ snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+ /* Control magic - load onboard firmware */
+ 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
+ if (bootresponse == MBOX2_BOOT_READY)
+ break;
+ snd_printd("usb-audio: device not ready, resending boot sequence...\n");
+ count++;
+ }
+
+ if (bootresponse != MBOX2_BOOT_READY) {
+ snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse);
+ return -ENODEV;
+ }
+
+ snd_printdd("usb-audio: device initialised!\n");
+
+ err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+ &dev->descriptor, sizeof(dev->descriptor));
+ config = dev->actconfig;
+ if (err < 0)
+ snd_printd("error usb_get_descriptor: %d\n", err);
+
+ err = usb_reset_configuration(dev);
+ if (err < 0)
+ snd_printd("error usb_reset_configuration: %d\n", err);
+ snd_printdd("mbox2_boot: new boot length = %d\n",
+ le16_to_cpu(get_cfg_desc(config)->wTotalLength));
+
+ mbox2_setup_48_24_magic(dev);
+
+ snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
+
+ return 0; /* Successful boot */
+}
+
void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
{
/*
diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
index 0ca9e91..e7e9530 100644
--- a/sound/usb/quirks.h
+++ b/sound/usb/quirks.h
@@ -24,6 +24,8 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
int snd_usb_is_big_endian_format(struct snd_usb_audio *chip,
struct audioformat *fp);
+int snd_usb_mbox2_boot_quirk(struct usb_device *dev);
+
void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep);
void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h
index 1ac3fd9..a8172c1 100644
--- a/sound/usb/usbaudio.h
+++ b/sound/usb/usbaudio.h
@@ -76,6 +76,7 @@ enum quirk_type {
QUIRK_MIDI_YAMAHA,
QUIRK_MIDI_MIDIMAN,
QUIRK_MIDI_NOVATION,
+ QUIRK_MIDI_MBOX2,
QUIRK_MIDI_RAW_BYTES,
QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME,
-------------- next part --------------
diff --git a/sound/usb/midi.c b/sound/usb/midi.c
index c183d34..34b9bb7 100644
--- a/sound/usb/midi.c
+++ b/sound/usb/midi.c
@@ -2181,10 +2181,6 @@ int snd_usbmidi_create(struct snd_card *card,
umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
- case QUIRK_MIDI_MBOX2:
- umidi->usb_protocol_ops = &snd_usbmidi_midiman_ops;
- err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
- break;
case QUIRK_MIDI_RAW_BYTES:
umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
/*
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index cdcf6b4..95e3326 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2993,7 +2993,7 @@ YAMAHA_DEVICE(0x7010, "UB99"),
},
{
.ifnum = 6,
- .type = QUIRK_MIDI_MBOX2,
+ .type = QUIRK_MIDI_MIDIMAN,
.data = &(const struct snd_usb_midi_endpoint_info) {
.out_ep = 0x02,
.out_cables = 0x0001,
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 8f23af5..dc96696 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -306,7 +306,6 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip,
[QUIRK_MIDI_YAMAHA] = create_any_midi_quirk,
[QUIRK_MIDI_MIDIMAN] = create_any_midi_quirk,
[QUIRK_MIDI_NOVATION] = create_any_midi_quirk,
- [QUIRK_MIDI_MBOX2] = create_any_midi_quirk,
[QUIRK_MIDI_RAW_BYTES] = create_any_midi_quirk,
[QUIRK_MIDI_EMAGIC] = create_any_midi_quirk,
[QUIRK_MIDI_CME] = create_any_midi_quirk,
@@ -498,6 +497,92 @@ static int snd_usb_nativeinstruments_boot_quirk(struct usb_device *dev)
return -EAGAIN;
}
+static void mbox2_setup_48_24_magic(struct usb_device *dev)
+{
+ u8 srate[3];
+ u8 temp[12];
+
+ /* Choose 48000Hz permanently */
+ srate[0] = 0x80;
+ srate[1] = 0xbb;
+ srate[2] = 0x00;
+
+ /* Send the magic! */
+ snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+ 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
+ snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
+ return;
+}
+
+/* Digidesign Mbox 2 needs to load firmware onboard
+ * and driver must wait a few seconds for initialisation.
+ */
+
+#define MBOX2_FIRMWARE_SIZE 646
+#define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
+#define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
+
+static int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
+{
+ struct usb_host_config *config = dev->actconfig;
+ int err;
+ u8 bootresponse[12];
+ int fwsize;
+ int count;
+
+ fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
+
+ if (fwsize != MBOX2_FIRMWARE_SIZE) {
+ snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
+ return -ENODEV;
+ }
+
+ snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
+
+ count = 0;
+ bootresponse[0] = MBOX2_BOOT_LOADING;
+ while ((bootresponse[0] == MBOX2_BOOT_LOADING) && (count < 10)) {
+ msleep(500); /* 0.5 second delay */
+ snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
+ /* Control magic - load onboard firmware */
+ 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
+ if (bootresponse[0] == MBOX2_BOOT_READY)
+ break;
+ snd_printd("usb-audio: device not ready, resending boot sequence...\n");
+ count++;
+ }
+
+ if (bootresponse[0] != MBOX2_BOOT_READY) {
+ snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse[0]);
+ return -ENODEV;
+ }
+
+ snd_printdd("usb-audio: device initialised!\n");
+
+ err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
+ &dev->descriptor, sizeof(dev->descriptor));
+ config = dev->actconfig;
+ if (err < 0)
+ snd_printd("error usb_get_descriptor: %d\n", err);
+
+ err = usb_reset_configuration(dev);
+ if (err < 0)
+ snd_printd("error usb_reset_configuration: %d\n", err);
+ snd_printdd("mbox2_boot: new boot length = %d\n",
+ le16_to_cpu(get_cfg_desc(config)->wTotalLength));
+
+ mbox2_setup_48_24_magic(dev);
+
+ snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
+
+ return 0; /* Successful boot */
+}
+
/*
* Setup quirks
*/
@@ -574,7 +659,6 @@ static int audiophile_skip_setting_quirk(struct snd_usb_audio *chip,
return 0; /* keep this altsetting */
}
-
static int fasttrackpro_skip_setting_quirk(struct snd_usb_audio *chip,
int iface, int altno)
{
@@ -766,92 +850,6 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
}
}
-static void mbox2_setup_48_24_magic(struct usb_device *dev)
-{
- u8 srate[3];
- u8 temp[12];
-
- /* Choose 48000Hz permanently */
- srate[0] = 0x80;
- srate[1] = 0xbb;
- srate[2] = 0x00;
-
- /* Send the magic! */
- snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
- 0x01, 0x22, 0x0100, 0x0085, &temp, 0x0003);
- snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x81, 0xa2, 0x0100, 0x0085, &srate, 0x0003);
- snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x81, 0xa2, 0x0100, 0x0086, &srate, 0x0003);
- snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
- 0x81, 0xa2, 0x0100, 0x0003, &srate, 0x0003);
- return;
-}
-
-/* Digidesign Mbox 2 needs to load firmware onboard
- * and driver must wait a few seconds for initialisation.
- */
-
-#define MBOX2_FIRMWARE_SIZE 646
-#define MBOX2_BOOT_LOADING 0x01 /* Hard coded into the device */
-#define MBOX2_BOOT_READY 0x02 /* Hard coded into the device */
-
-int snd_usb_mbox2_boot_quirk(struct usb_device *dev)
-{
- struct usb_host_config *config = dev->actconfig;
- int err;
- u8 bootresponse;
- int fwsize;
- int count;
-
- fwsize = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
-
- if (fwsize != MBOX2_FIRMWARE_SIZE) {
- snd_printk(KERN_ERR "usb-audio: Invalid firmware size=%d.\n", fwsize);
- return -ENODEV;
- }
-
- snd_printd("usb-audio: Sending Digidesign Mbox 2 boot sequence...\n");
-
- count = 0;
- bootresponse = MBOX2_BOOT_LOADING;
- while ((bootresponse == MBOX2_BOOT_LOADING) && (count < 10)) {
- msleep(500); /* 0.5 second delay */
- snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0),
- /* Control magic - load onboard firmware */
- 0x85, 0xc0, 0x0001, 0x0000, &bootresponse, 0x0012);
- if (bootresponse == MBOX2_BOOT_READY)
- break;
- snd_printd("usb-audio: device not ready, resending boot sequence...\n");
- count++;
- }
-
- if (bootresponse != MBOX2_BOOT_READY) {
- snd_printk(KERN_ERR "usb-audio: Unknown bootresponse=%d, or timed out, ignoring device.\n", bootresponse);
- return -ENODEV;
- }
-
- snd_printdd("usb-audio: device initialised!\n");
-
- err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
- &dev->descriptor, sizeof(dev->descriptor));
- config = dev->actconfig;
- if (err < 0)
- snd_printd("error usb_get_descriptor: %d\n", err);
-
- err = usb_reset_configuration(dev);
- if (err < 0)
- snd_printd("error usb_reset_configuration: %d\n", err);
- snd_printdd("mbox2_boot: new boot length = %d\n",
- le16_to_cpu(get_cfg_desc(config)->wTotalLength));
-
- mbox2_setup_48_24_magic(dev);
-
- snd_printk(KERN_INFO "usb-audio: Digidesign Mbox 2: 24bit 48kHz");
-
- return 0; /* Successful boot */
-}
-
void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep)
{
/*
diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
index e7e9530..0ca9e91 100644
--- a/sound/usb/quirks.h
+++ b/sound/usb/quirks.h
@@ -24,8 +24,6 @@ void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
int snd_usb_is_big_endian_format(struct snd_usb_audio *chip,
struct audioformat *fp);
-int snd_usb_mbox2_boot_quirk(struct usb_device *dev);
-
void snd_usb_endpoint_start_quirk(struct snd_usb_endpoint *ep);
void snd_usb_ctl_msg_quirk(struct usb_device *dev, unsigned int pipe,
More information about the Alsa-devel
mailing list