[alsa-devel] [PATCH] sound: usb-audio: full capture/playback/spdif support for Digidesign Mbox 2

[Damien Zammit]

Hi,

Not sure if this is relevant, but when I compile the module with a few
changes, then try to insert the modules snd-usbmidi-lib and
snd-usb-audio, I get

$ sudo insmod ./snd-usbmidi-lib.ko
Error: could not insert module ./snd-usbmidi-lib.ko: Unknown symbol in module

Also, I think I might have found the bug but I cant test it due to the above.

Damien

On 23 December 2012 10:38, Damien Zammit <damien.zammit at gmail.com> wrote:
> On 19 December 2012 21:37, Damien Zammit <damien.zammit at gmail.com> wrote:
>> I will be sure to compile this kernel when it comes out and double
>> check it on the hardware!
> Bad news, the kernel panics when I plug in the device on this kernel.
> I compiled the kernel yesterday with default options except I changed
> HZ=1000 and used generic X86_64 with kernel preemption:
>
> $ uname -a
> Linux zamserv 3.8.0-rc1 #1 SMP PREEMPT Sat Dec 22 21:56:06 EST 2012
> x86_64 GNU/Linux
>
> Attached is a panic dump.
>
> Damien