[alsa-devel] [PATCH RFT] ASoC: lm49453: Fix mask for setting mode bit in lm49453_set_dai_fmt()

[Axel Lin]

The mode variable is either 0 or 1.
To update mode setting, the mask should be BIT(0) rather than BIT(1).

Signed-off-by: Axel Lin <axel.lin at ingics.com>
---
Hi M R Swami,
I don't have the datasheet. Can you check if this patch is correct?
Thanks,
Axel
 sound/soc/codecs/lm49453.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/lm49453.c b/sound/soc/codecs/lm49453.c
index d75257d..c0d203b 100644
--- a/sound/soc/codecs/lm49453.c
+++ b/sound/soc/codecs/lm49453.c
@@ -1218,7 +1218,7 @@ static int lm49453_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
 	}
 
 	snd_soc_update_bits(codec, LM49453_P0_AUDIO_PORT1_BASIC_REG,
-			    LM49453_AUDIO_PORT1_BASIC_FMT_MASK|BIT(1)|BIT(5),
+			    LM49453_AUDIO_PORT1_BASIC_FMT_MASK|BIT(0)|BIT(5),
 			    (aif_val | mode | clk_phase));
 
 	snd_soc_write(codec, LM49453_P0_AUDIO_PORT1_RX_MSB_REG, clk_shift);
-- 
1.7.9.5