[alsa-devel] [PATCH v2] ALSA: hda - Don't send invalid volume knob command on IDT 92hd75bxx
David Henningsson
david.henningsson at canonical.com
Thu Aug 16 14:11:09 CEST 2012
Instead of blindly initializing a volume knob widget, first check
that there actually is a volume knob widget.
Signed-off-by: David Henningsson <david.henningsson at canonical.com>
---
sound/pci/hda/patch_sigmatel.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 94040cc..ea5775a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4272,7 +4272,8 @@ static int stac92xx_init(struct hda_codec *codec)
unsigned int gpio;
int i;
- snd_hda_sequence_write(codec, spec->init);
+ if (spec->init)
+ snd_hda_sequence_write(codec, spec->init);
/* power down adcs initially */
if (spec->powerdown_adcs)
@@ -5748,7 +5749,6 @@ again:
/* fallthru */
case 0x111d76b4: /* 6 Port without Analog Mixer */
case 0x111d76b5:
- spec->init = stac92hd71bxx_core_init;
codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
spec->num_dmics = stac92xx_connected_ports(codec,
stac92hd71bxx_dmic_nids,
@@ -5773,7 +5773,6 @@ again:
spec->stream_delay = 40; /* 40 milliseconds */
/* disable VSW */
- spec->init = stac92hd71bxx_core_init;
unmute_init++;
snd_hda_codec_set_pincfg(codec, 0x0f, 0x40f000f0);
snd_hda_codec_set_pincfg(codec, 0x19, 0x40f000f3);
@@ -5788,7 +5787,6 @@ again:
/* fallthru */
default:
- spec->init = stac92hd71bxx_core_init;
codec->slave_dig_outs = stac92hd71bxx_slave_dig_outs;
spec->num_dmics = stac92xx_connected_ports(codec,
stac92hd71bxx_dmic_nids,
@@ -5796,6 +5794,9 @@ again:
break;
}
+ if (get_wcaps_type(get_wcaps(codec, 0x28)) == AC_WID_VOL_KNB)
+ spec->init = stac92hd71bxx_core_init;
+
if (get_wcaps(codec, 0xa) & AC_WCAP_IN_AMP)
snd_hda_sequence_write_cache(codec, unmute_init);
--
1.7.9.5
More information about the Alsa-devel
mailing list