[alsa-devel] "modprobe snd_hda_intel" crashes on my hardware

[Abdelghani Ouchabane]

Clemens Ladisch wrote:
> Or not.  Who wrote that BIOS?  Somebody whose brain was damaged by too
> much ultrasound?
>   
Not me ;-) ,
>
> Anyway, you could just override the pin configs with a HDA patch file.
> Ensure that your kernel is compiled with CONFIG_SND_HDA_PATCH_LOADER;
> then create a file /lib/firmware/forgotten-ezono-hda-settings with the
> following contents:
>
> [codec]
> 0x11061708 0xffffffff 2
> [pincfg]
> 0x1c 0x0000f000
> 0x1d 0x00a0f040
> 0x1f 0x0100f010
> 0x20 0x0020f000
> 0x22 0x0000f002
> 0x23 0x0000f004
>
> Then load the snd-hda-intel driver with the parameter
> "patch=forgotten-ezono-hda-settings", either by adding that
> parameter to the modprobe command line, or by putting the line
>
>   options snd-hda-intel patch=forgotten-ezono-hda-settings
>
> into a .conf file in /etc/modprobe.d/.
>
>
> Regards,
> Clemens
>   
Thanks a lot Clemens for your great feedback, I will test your solution 
and let you know.

My best regards,
Ghani
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
>