[alsa-devel] [RFC] [PATCH 02/62] mpu401:snd_mpu401_uart_new(): split semantic of irq_flags
Takashi Iwai
tiwai at suse.de
Mon Sep 12 12:47:29 CEST 2011
At Sun, 11 Sep 2011 17:10:36 +0200,
Clemens Ladisch wrote:
>
> diff --git a/sound/isa/als100.c b/sound/isa/als100.c
> index 20becc8..3355609 100644
> --- a/sound/isa/als100.c
> +++ b/sound/isa/als100.c
> @@ -245,18 +245,22 @@ static int __devinit snd_card_als100_probe(int dev,
>
> if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT) {
> int mpu_type = MPU401_HW_ALS100;
> + int mpu_flags = 0;
>
> - if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
> + if (mpu_irq[dev] == SNDRV_AUTO_IRQ) {
> mpu_irq[dev] = -1;
> + mpu_flags = MPU401_INFO_RX_POLL;
> + }
When mpu_irq[dev] is set to -1, it won't work.
Instead of setting mpu_flag in this if block, you'd need another check
of mpu_irq[], i.e.
if (mpu_irq[dev] == SNDRV_AUTO_IRQ)
mpu_irq[dev] = -1;
if (mpu_irq[dev] < 0)
mpu_flags = MPU401_INFO_RX_POLL;
The similar problems are found in other places, too.
thanks,
Takashi
More information about the Alsa-devel
mailing list