[alsa-devel] [PATCH v3] ASoC: omap: convert per-board modules to platform drivers

[Russell King - ARM Linux]

On Fri, Sep 09, 2011 at 12:38:51PM +0100, Mans Rullgard wrote:
> This converts the per-board modules to platform drivers for a
> device created by in main platform setup.  These drivers call
> snd_soc_register_card() directly instead of going via a "soc-audio"
> device and the corresponding driver in soc-core.
> 
> Signed-off-by: Mans Rullgard <mans.rullgard at linaro.org>
> ---
> This version uses a table to assign the device name in omap_init_audio().
> It is certainly less ugly than the previous patch.
> 
> Again, tested only on Beagle.
> ---
>  arch/arm/mach-omap2/devices.c |   34 +++++++++++++++++++
>  sound/soc/omap/am3517evm.c    |   55 +++++++++++++++++++-----------
>  sound/soc/omap/igep0020.c     |   52 +++++++++++++++++++----------
>  sound/soc/omap/n810.c         |   73 ++++++++++++++++++++++++++---------------
>  sound/soc/omap/omap3beagle.c  |   55 +++++++++++++++++++-----------
>  sound/soc/omap/omap3evm.c     |   56 ++++++++++++++++++++-----------
>  sound/soc/omap/omap3pandora.c |   70 ++++++++++++++++++++++++---------------
>  sound/soc/omap/overo.c        |   56 +++++++++++++++++++------------
>  sound/soc/omap/rx51.c         |   55 +++++++++++++++++++++----------
>  sound/soc/omap/sdp3430.c      |   65 ++++++++++++++++++++++--------------
>  sound/soc/omap/sdp4430.c      |   60 +++++++++++++++++++++------------
>  sound/soc/omap/zoom2.c        |   68 +++++++++++++++++++++++++-------------
>  12 files changed, 458 insertions(+), 241 deletions(-)

I don't think this is an improvement.  Just look at the diffstat - it almost
doubles the number of lines of code.

One thing here which is utterly silly is:

> +static struct {
> +	int machine;
> +	const char *name;
> +} soc_device_names[] = {
> +	{ MACH_TYPE_OMAP3517EVM,	"am3517evm-soc-audio"	},
> +	{ MACH_TYPE_IGEP0020,		"igep2-soc-audio"	},
> +	{ MACH_TYPE_NOKIA_N810,		"n8x1-soc-audio"	},
> +	{ MACH_TYPE_NOKIA_N810_WIMAX,	"n8x1-soc-audio"	},
> +	{ MACH_TYPE_OMAP3_BEAGLE,	"omap3beagle-soc-audio"	},
> +	{ MACH_TYPE_DEVKIT8000,		"omap3beagle-soc-audio"	},
> +	{ MACH_TYPE_OMAP3EVM,		"omap3evm-soc-audio"	},
> +	{ MACH_TYPE_OMAP3_PANDORA,	"pandora-soc-audio"	},
> +	{ MACH_TYPE_OVERO,		"overo-soc-audio",	},
> +	{ MACH_TYPE_CM_T35,		"overo-soc-audio",	},
> +	{ MACH_TYPE_NOKIA_RX51,		"rx51-soc-audio",	},
> +	{ MACH_TYPE_OMAP_3430SDP,	"sdp3430-soc-audio",	},
> +	{ MACH_TYPE_OMAP_4430SDP,	"sdp4430-soc-audio",	},
> +	{ MACH_TYPE_OMAP_ZOOM2,		"zoom2-soc-audio",	},
> +};

So you're using the machine ID to select the name of the device.
(That's not really DT compatible.)

> +static int __init am3517evm_soc_init(void)
> +{
> +	if (!machine_is_omap3517evm())
> +		return -ENODEV;

But then you conditionalize the registration of the drivers on the
platform as well.  Why?  It's pointless.  If you don't have the core
code register the struct device for this platform then this driver
won't be bound to a device, and therefore the probe function won't be
called.