[alsa-devel] [PATCH v5 2/2] ASoC: da7210: Add support for ALC and Noise suppression
Girdwood, Liam
lrg at ti.com
Wed Oct 19 09:57:57 CEST 2011
On 18 October 2011 14:43, Ashish Chavan <ashish.chavan at kpitcummins.com> wrote:
> This patch adds controls to set following ALC parameters,
> - Max gain, Min gain, Noise gain, Attack rate, Release rate and delay
>
> It also adds a switch to enable/disable noise suppression.
>
> As per DA7210 data sheet, ALC and noise suppression can be enabled
> only if certain conditions are met. This condition checks are handled
> by simply using "_EXT" version of controls to capture change events.
>
> Signed-off-by: Ashish Chavan <ashish.chavan at kpitcummins.com>
> Signed-off-by: David Dajun Chen <dchen at diasemi.com>
> ---
> Changes since v1:
> - Reading from register instead of cache
> - Made debug message more specific about error
> - Changed "Gain" to "Volume" in names of ALC controls
> ---
> sound/soc/codecs/da7210.c | 109 +++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 109 insertions(+), 0 deletions(-)
>
> diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
> index a31be70..edcfc36 100644
> --- a/sound/soc/codecs/da7210.c
> +++ b/sound/soc/codecs/da7210.c
> @@ -26,11 +26,15 @@
> #include <sound/tlv.h>
>
> /* DA7210 register space */
> +#define DA7210_CONTROL 0x01
> #define DA7210_STATUS 0x02
> #define DA7210_STARTUP1 0x03
> #define DA7210_MIC_L 0x07
> #define DA7210_MIC_R 0x08
> +#define DA7210_AUX1_L 0x09
> +#define DA7210_AUX1_R 0x0A
> #define DA7210_AUX2 0x0B
> +#define DA7210_IN_GAIN 0x0C
> #define DA7210_INMIX_L 0x0D
> #define DA7210_INMIX_R 0x0E
> #define DA7210_ADC_HPF 0x0F
> @@ -59,6 +63,12 @@
> #define DA7210_PLL_DIV2 0x2A
> #define DA7210_PLL_DIV3 0x2B
> #define DA7210_PLL 0x2C
> +#define DA7210_ALC_MAX 0x83
> +#define DA7210_ALC_MIN 0x84
> +#define DA7210_ALC_NOIS 0x85
> +#define DA7210_ALC_ATT 0x86
> +#define DA7210_ALC_REL 0x87
> +#define DA7210_ALC_DEL 0x88
> #define DA7210_A_HID_UNLOCK 0x8A
> #define DA7210_A_TEST_UNLOCK 0x8B
> #define DA7210_A_PLL1 0x90
> @@ -81,6 +91,7 @@
> #define DA7210_IN_R_EN (1 << 7)
>
> /* ADC bit fields */
> +#define DA7210_ADC_ALC_EN (1 << 0)
> #define DA7210_ADC_L_EN (1 << 3)
> #define DA7210_ADC_R_EN (1 << 7)
>
> @@ -150,6 +161,29 @@
> /* SOFTMUTE bit fields */
> #define DA7210_RAMP_EN (1 << 6)
>
> +/* CONTROL bit fields */
> +#define DA7210_NOISE_SUP_EN (1 << 3)
> +
> +/* IN_GAIN bit fields */
> +#define DA7210_INPGA_L_VOL (0x0F << 0)
> +#define DA7210_INPGA_R_VOL (0xF0 << 0)
> +
> +/* ZERO_CROSS bit fields */
> +#define DA7210_AUX1_L_ZC (1 << 0)
> +#define DA7210_AUX1_R_ZC (1 << 1)
> +#define DA7210_HP_L_ZC (1 << 6)
> +#define DA7210_HP_R_ZC (1 << 7)
> +
> +/* AUX1_L bit fields */
> +#define DA7210_AUX1_L_VOL (0x3F << 0)
> +
> +/* AUX1_R bit fields */
> +#define DA7210_AUX1_R_VOL (0x3F << 0)
> +
> +/* Minimum INPGA and AUX1 volume to enable noise suppression */
> +#define DA7210_INPGA_MIN_VOL_NS 0x0A /* 10.5dB */
> +#define DA7210_AUX1_MIN_VOL_NS 0x35 /* 6dB */
> +
> #define DA7210_VERSION "0.0.1"
>
> /*
> @@ -202,6 +236,68 @@ static const char *da7210_hp_mode_txt[] = {
> static const struct soc_enum da7210_hp_mode_sel =
> SOC_ENUM_SINGLE(DA7210_HP_CFG, 0, 2, da7210_hp_mode_txt);
>
> +/* ALC can be enabled only if noise suppression is disabled */
> +static int da7210_put_alc_sw(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
> +
> + if (ucontrol->value.integer.value[0]) {
> + /* Check if noise suppression is enabled */
> + if (snd_soc_read(codec, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) {
> + dev_dbg(codec->dev,
> + "Disable noise suppression to enable ALC\n");
> + return -EPERM;
-EINVAL
> + }
> + }
> + /* If all conditions are met or we are actually disabling ALC */
> + return snd_soc_put_volsw(kcontrol, ucontrol);
> +}
> +
> +/* Noise suppression can be enabled only if following conditions are met
> + * ALC disabled
> + * ZC enabled for HP and AUX1 PGA
> + * INPGA_L_VOL and INPGA_R_VOL >= 10.5 dB
> + * AUX1_L_VOL and AUX1_R_VOL >= 6 dB
> + */
> +static int da7210_put_noise_sup_sw(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
> + u8 val;
> +
> + if (ucontrol->value.integer.value[0]) {
> + /* Check if ALC is enabled */
> + if (snd_soc_read(codec, DA7210_ADC) & DA7210_ADC_ALC_EN)
> + goto err;
> +
> + /* Check ZC for HP and AUX1 PGA */
> + if ((snd_soc_read(codec, DA7210_ZERO_CROSS) &
> + (DA7210_AUX1_L_ZC | DA7210_AUX1_R_ZC | DA7210_HP_L_ZC |
> + DA7210_HP_R_ZC)) != 0xc3)
It may be clearer if you don't use the magic number here and specify
the bits you are checking.
> + goto err;
> +
> + /* Check INPGA_L_VOL and INPGA_R_VOL */
> + val = snd_soc_read(codec, DA7210_IN_GAIN);
> + if (((val & DA7210_INPGA_L_VOL) < DA7210_INPGA_MIN_VOL_NS) ||
> + (((val & DA7210_INPGA_R_VOL) >> 4) <
> + DA7210_INPGA_MIN_VOL_NS))
> + goto err;
> +
> + /* Check AUX1_L_VOL and AUX1_R_VOL */
> + if (((snd_soc_read(codec, DA7210_AUX1_L) & DA7210_AUX1_L_VOL) <
> + DA7210_AUX1_MIN_VOL_NS) ||
> + ((snd_soc_read(codec, DA7210_AUX1_R) & DA7210_AUX1_R_VOL) <
> + DA7210_AUX1_MIN_VOL_NS))
> + goto err;
> + }
> + /* If all conditions are met or we are actually disabling Noise sup */
> + return snd_soc_put_volsw(kcontrol, ucontrol);
> +
> +err:
> + return -EPERM;
-EINVAL
> +}
> +
> static const struct snd_kcontrol_new da7210_snd_controls[] = {
>
> SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
> @@ -260,6 +356,19 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = {
> SOC_DOUBLE("Headphone ZC Switch", DA7210_ZERO_CROSS, 6, 7, 1, 0),
>
> SOC_ENUM("Headphone Class", da7210_hp_mode_sel),
> +
> + /* ALC controls */
> + SOC_SINGLE_EXT("ALC Enable Switch", DA7210_ADC, 0, 1, 0,
> + snd_soc_get_volsw, da7210_put_alc_sw),
> + SOC_SINGLE("ALC Capture Max Volume", DA7210_ALC_MAX, 0, 0x3F, 0),
> + SOC_SINGLE("ALC Capture Min Volume", DA7210_ALC_MIN, 0, 0x3F, 0),
> + SOC_SINGLE("ALC Capture Noise Volume", DA7210_ALC_NOIS, 0, 0x3F, 0),
> + SOC_SINGLE("ALC Capture Attack Rate", DA7210_ALC_ATT, 0, 0xFF, 0),
> + SOC_SINGLE("ALC Capture Release Rate", DA7210_ALC_REL, 0, 0xFF, 0),
> + SOC_SINGLE("ALC Capture Release Delay", DA7210_ALC_DEL, 0, 0xFF, 0),
> +
> + SOC_SINGLE_EXT("Noise Suppression Enable Switch", DA7210_CONTROL, 3, 1,
> + 0, snd_soc_get_volsw, da7210_put_noise_sup_sw),
> };
>
> /* Codec private data */
> --
> 1.7.1
>
>
>
More information about the Alsa-devel
mailing list