[alsa-devel] [PATCH 4/9] ASoC: da7210: Add support for mute and zero cross controls
Ashish Chavan
ashish.chavan at kpitcummins.com
Wed Oct 12 17:01:35 CEST 2011
This patch adds support for below set of controls,
(1) Mute controls for MIC, AUX, ADC and DAC
(2) Zero cross controls for head phone, AUX, INPGA and line out
(3) Head phone mode selection - class H or G
Tested on Samsung SMDK6410 board with DA7210 evaluation board.
Signed-off-by: Ashish Chavan <ashish.chavan at kpitcummins.com>
Signed-off-by: David Dajun Chen <dchen at diasemi.com>
---
sound/soc/codecs/da7210.c | 32 ++++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index b48a8af..1b4554a 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -45,6 +45,7 @@
#define DA7210_DAC_L 0x15
#define DA7210_DAC_R 0x16
#define DA7210_DAC_SEL 0x17
+#define DA7210_SOFTMUTE 0x18
#define DA7210_DAC_EQ1_2 0x19
#define DA7210_DAC_EQ3_4 0x1A
#define DA7210_DAC_EQ5 0x1B
@@ -56,6 +57,7 @@
#define DA7210_HP_L_VOL 0x21
#define DA7210_HP_R_VOL 0x22
#define DA7210_HP_CFG 0x23
+#define DA7210_ZERO_CROSS 0x24
#define DA7210_DAI_SRC_SEL 0x25
#define DA7210_DAI_CFG1 0x26
#define DA7210_DAI_CFG3 0x28
@@ -166,6 +168,9 @@
/* AUX2 bit fields */
#define DA7210_AUX2_EN (1 << 3)
+/* SOFTMUTE bit fields */
+#define DA7210_RAMP_EN (1 << 6)
+
/* Default gain/vol values */
#define DA7210_DFLT_DAC_GAIN 0x10 /* 0dB */
#define DA7210_DFLT_OUT1_VOL 0x35 /* 0dB */
@@ -227,6 +232,13 @@ static const char *da7210_mic_bias_voltage_txt[] = {
static const struct soc_enum da7210_mic_bias =
SOC_ENUM_SINGLE(DA7210_MIC_L, 4, 4, da7210_mic_bias_voltage_txt);
+static const char *da7210_hp_mode_txt[] = {
+ "Class H", "Class G"
+};
+
+static const struct soc_enum da7210_hp_mode_sel =
+ SOC_ENUM_SINGLE(DA7210_HP_CFG, 0, 2, da7210_hp_mode_txt);
+
static const struct snd_kcontrol_new da7210_snd_controls[] = {
SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
@@ -284,6 +296,24 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = {
eq_gain_tlv),
SOC_SINGLE_TLV("ADC EQ5 Volume", DA7210_ADC_EQ5, 0, 0xf, 1,
eq_gain_tlv),
+
+ /* Mute controls */
+ SOC_SINGLE("Mic Left Mute Switch", DA7210_MIC_L, 3, 1, 0),
+ SOC_SINGLE("Mic Right Mute Switch", DA7210_MIC_R, 3, 1, 0),
+ SOC_SINGLE("Aux2 Mute Switch", DA7210_AUX2, 2, 1, 0),
+ SOC_SINGLE("ADC Left Mute Switch", DA7210_ADC, 2, 1, 0),
+ SOC_SINGLE("ADC Right Mute Switch", DA7210_ADC, 6, 1, 0),
+ SOC_SINGLE("DAC Mute Switch", DA7210_DAC_HPF, 2, 1, 0),
+ SOC_SINGLE("DAC Soft Mute Switch", DA7210_SOFTMUTE, 7, 1, 0),
+ SOC_SINGLE("DAC Soft Mute Rate", DA7210_SOFTMUTE, 0, 0X7, 0),
+
+ /* Zero cross controls */
+ SOC_DOUBLE("Aux1 ZC Switch", DA7210_ZERO_CROSS, 0, 1, 1, 0),
+ SOC_DOUBLE("In PGA ZC Switch", DA7210_ZERO_CROSS, 2, 3, 1, 0),
+ SOC_DOUBLE("Lineout ZC Switch", DA7210_ZERO_CROSS, 4, 5, 1, 0),
+ SOC_DOUBLE("Headphone ZC Switch", DA7210_ZERO_CROSS, 6, 7, 1, 0),
+
+ SOC_ENUM("Headphone Class", da7210_hp_mode_sel),
};
/* Codec private data */
@@ -629,6 +659,8 @@ static int da7210_probe(struct snd_soc_codec *codec)
/* Set default In PGA gain */
snd_soc_write(codec, DA7210_IN_GAIN, DA7210_DFLT_INPGA_VOL |
(DA7210_DFLT_INPGA_VOL << 4));
+ /* Enable ramp mode for DAC gain update */
+ snd_soc_write(codec, DA7210_SOFTMUTE, DA7210_RAMP_EN);
/* Diable PLL and bypass it */
snd_soc_write(codec, DA7210_PLL, DA7210_PLL_FS_48000);
--
1.7.1
More information about the Alsa-devel
mailing list